Nissan Pathfinder. Manual — part 649
QUICK REFERENCE CHART: PATHFINDER
2014
Spark Plug
INFOID:0000000009809604
SPARK PLUG
Unit: mm (in)
*: Always check with the Parts Department for the latest parts information.
Front Wheel Alignment
INFOID:0000000009809600
UNITED STATES and MEXICO
Measure value under unladen conditions (Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in desig-
nated positions).
*1: The (RH) camber angle shall be –0
° 15′ ± 0° 33′ (0.25° ± 0.55°) with respect to the (LH) camber angle.
CANADA
Make
DENSO
Standard type*
FXE22HR11
Gap
Standard
1.1 (0.043)
Item
Standard
Measurement wheel
(LH) side
(RH) side
Camber
Degree minute (Decimal degree)
Minimum
–1
° 00′ (–1.00°)
–1
° 15′ (–1.25°)
Nominal
–0
° 15′ (–0.25°)
–0
° 30′ (–0.50°)
Maximum
0
° 30′ (0.50°)
0
° 15′ (0.25°)
Left and right difference*
1
–0
° 15′ ± 0° 33′ (0.25° ± 0.55°)
Caster
Degree minute (Decimal degree)
Minimum
3
° 55′ (3.92°)
Nominal
4
° 40′ (4.67°)
Maximum
5
° 25′ (5.42°)
Left and right difference*
1
0.30
′ (0.50°) Maximum
Kingpin inclination
Degree minute (Decimal degree)
Minimum
11
° 55′ (11.92°)
12
° 10′ (12.17°)
Nominal
12
° 40′ (12.67°)
12
° 55′ (12.92°)
Maximum
13
° 25′ (13.42°)
13
° 40′ (13.67°)
Total toe-in
Distance (A - B)
Minimum
Out 0.6 mm (Out 0.024 in)
Nominal
In 1.4 mm (In 0.055 in)
Maximum
In 3.4 mm (In 0.134 in)
Angle (left and right)
Degree minute
(Decimal degree)
Minimum
Out 0
° 3′ 36″ (Out 0.06°)
Nominal
In 0
° 6′ 14″ (In 0.10°)
Maximum
In 0
° 15′ 36″ (In 0.26°)
SFA234AC
2014
QUICK REFERENCE CHART: PATHFINDER
Measure value under unladen conditions. (Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in desig-
nated positions).
*1: The (RH) camber angle shall be –0
° 15′ ± 0° 33′ (0.25° ± 0.55°) with respect to the (LH) camber angle.
Rear Wheel Alignment (Unladen*)
INFOID:0000000009809601
Item
Standard
Measurement wheel
(LH) side
(RH) side
Camber
Degree minute (Decimal degree)
Minimum
–1
° 00′ (–1.00°)
–1
° 15′ (–1.25°)
Nominal
–0
° 15′ (–0.25°)
–0
° 30′ (–0.50°)
Maximum
0
° 30′ (0.50°)
0
° 15′ (0.25°)
Left and right difference*
1
–0
° 15′ ± 0° 33′ (0.25° ± 0.55°)
Caster
Degree minute (Decimal degree)
Minimum
4
° 00′ (4.00°)
Nominal
4
° 45′ (4.75°)
Maximum
5
° 30′ (5.50°)
Left and right difference*
1
0.30
′ (0.50°) Maximum
Kingpin inclination
Degree minute (Decimal degree)
Minimum
11
° 55′ (11.92°)
12
° 10′ (12.17°)
Nominal
12
° 40′ (12.67°)
12
° 55′ (12.92°)
Maximum
13
° 25′ (13.42°)
13
° 40′ (13.67°)
Total toe-in
Distance (A - B)
Minimum
Out 0.6 mm (Out 0.024 in)
Nominal
In 1.4 mm (In 0.055 in)
Maximum
In 3.4 mm (In 0.134 in)
Angle (left and right)
Degree minute
(Decimal degree)
Minimum
Out 0
° 3′ 36″ (Out 0.06°)
Nominal
In 0
° 6′ 14″ (In 0.10°)
Maximum
In 0
° 15′ 36″ (In 0.26°)
SFA234AC
Item
Standard
Camber
Degree minute (Decimal degree)
Minimum
–1
° 05′ (–1.08°)
Nominal
–0
° 35′ (–0.58°)
Maximum
–0
° 05′ (–0.08°)
SFA234AC
QUICK REFERENCE CHART: PATHFINDER
2014
*: Fuel, engine coolant, and lubricants are full. Spare tire, jack, hand tools, and mats are in designated positions.
Wheelarch Height
INFOID:0000000009809599
UNITED STATES
Unit: mm (in)
Measure value under unladen conditions. (Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in desig-
nated positions).
CANADA
Unit: mm (in)
Measure value under unladen* conditions. (Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in desig-
nated positions).
Total toe-in
Distance (A - B)
Minimum
Out 0.8 mm (Out 0.031 in)
Nominal
In 2.2 mm (In 0.087 in)
Maximum
In 5.2 mm (In 0.205 in)
Angle (LH and RH)
Degree minute
(Decimal degree)
Minimum
Out 0
° 2′ 24″ (Out 0.04°)
Nominal
In 0
° 9′ 36″ (In 0.16°)
Maximum
In 0
° 21′ 36″ (In 0.36°)
Item
Standard
Axle type
2WD
4WD
Wheel size
235/65R18
235/55R20
235/65R18
235/55R20
Grade
S, SV
SL
Platinum
S, SV
SL, Platinum
Front (Hf)
823 (32.40)
823 (32.40)
821 (32.32)
822 (32.36)
822 (32.36)
Rear (Hr)
828 (32.60)
827 (32.56)
825 (32.48)
827 (32.56)
826 (32.52)
LEIA0085E
Axle type
2WD
4WD
Wheel size
235/65R18
235/55R20
Grade
S
SL
S
SV
SL
Platinum
Front (Hf)
823 (32.40)
822 (32.36)
Rear (Hr)
829 (32.64)
828 (32.60)
827 (32.56)
LEIA0085E
2014
QUICK REFERENCE CHART: PATHFINDER
MEXICO
Unit: mm (in)
Measure value under unladen* conditions. (Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in desig-
nated positions).
Brake Specifications
INFOID:0000000009809598
Unit: mm (in)
Brake Pedal
INFOID:0000000009809597
Unit: mm (in)
Front Disc Brake
INFOID:0000000009809596
Unit: mm (in)
Axle type
2WD
4WD
Wheel size
235/65R18
235/55R20
Grade
Sense
Advance
Exclusive
Exclusive 4WD
Front (Hf)
823 (32.40)
821 (32.32)
Rear (Hf)
828 (32.60)
826 (32.52)
825 (32.48)
LEIA0085E
Front brake
Cylinder bore diameter
45.0 (1.772)
× 2
Pad length
× width × thickness
131.4 (5.173)
× 53.0 (2.087) × 10.0 (0.394)
Rotor outer diameter
× thickness
320.0 (12.598)
× 28.0 (1.102)
Rear brake
Cylinder bore diameter
42.86 (1.6874)
Pad length
× width × thickness
83.0 (3.268)
× 33.0 (1.299) × 8.5 (0.335)
Rotor outer diameter
× thickness
308 (12.126)
× 16.0 (0.630)
Master cylinder
Cylinder bore diameter
26.99 (1.063)
Control valve
Valve type
Electric brake force distribution
Item
Standard
Brake pedal height (H
1
)
214.2 – 224.2 (8.43 – 8.82)
Clearance (A) between brake pedal bracket, stop lamp switch and ASCD cancel switch contact
ends
0.74 – 1.96 (0.0291 – 0.0772)
Depressed brake pedal height (H
2
)
[Depressing 490 N (50 kg, 110 lb) while turning the engine ON]
75.1 (2.96)
Item
Limit
Brake pad
Wear thickness
2.0 (0.079)
Disc rotor
Wear thickness
26.0 (1.024)
Thickness variation (measured at 8 positions)
0.008 (0.0003)
Runout (with disc rotor attached to the vehicle)
0.040 (0.0016) or less
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст