Nissan Pathfinder. Manual — part 1199
WCS
DIAGNOSIS SYSTEM (COMBINATION METER)
WCS-13
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
NOTE:
Some items are not available according to vehicle specification.
Warning History
• Stores histories when warning/indicator lamp is turned on.
• “Warning History” indicates the “TIME” when the warning/indicator lamp is turned on.
• The “TIME” above is:
- 0: The condition that the warning/indicator lamp has been turned on 1 or more times after starting the engine
and waiting for 30 seconds.
- 1 - 39: The number of times the engine was restarted after the 0 condition.
- NO Warning History: Stores NO (0) turning on history of warning/indicator lamp.
NOTE:
• Warning History is not stored for approximately 30 seconds after the engine starts.
• Brake warning lamp does not store any history when the parking brake is applied or the brake fluid level gets
low.
TIRE PRESS FR
[kPa, kg/cm2 or Psi]
Displays air pressure of front right tire.
TIRE PRESS FL
[kPa, kg/cm2 or Psi]
Displays air pressure of front left tire.
TIRE PRESS RR
[kPa, kg/cm2 or Psi]
Displays air pressure of rear right tire.
TIRE PRESS RL
[kPa, kg/cm2 or Psi]
Displays air pressure of rear left tire.
Display item [Unit]
MAIN
SIGNALS
Description
WCS-14
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (BCM)
DIAGNOSIS SYSTEM (BCM)
COMMON ITEM
COMMON ITEM : CONSULT Function (BCM - COMMON ITEM)
INFOID:0000000009764029
CAUTION:
After disconnecting the CONSULT vehicle interface (VI) from the data link connector, the ignition must
be cycled OFF
→ ON (for at least 5 seconds) → OFF. If this step is not performed, the BCM may not go
to ”sleep mode”, potentially causing a discharged battery and no-start condition.
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions.
Direct Diagnostic Mode
Description
Ecu Identification
The BCM part number is displayed.
Self Diagnostic Result
The BCM self diagnostic results are displayed.
Data Monitor
The BCM input/output data is displayed in real time.
Active Test
The BCM activates outputs to test components.
Work support
The settings for BCM functions can be changed.
Configuration
• The vehicle specification can be read and saved.
• The vehicle specification can be written when replacing BCM.
CAN Diag Support Mntr
The result of transmit/receive diagnosis of CAN communication is displayed.
System
Sub System
Direct Diagnostic Mode
Ecu I
de
nti
ficat
ion
Se
lf Di
ag
no
sti
c
Res
ult
Dat
a Monitor
Active T
e
st
W
ork su
pp
ort
Co
nf
ig
ur
at
io
n
CAN Diag
Su
pp
ort
Mn
tr
Door lock
DOOR LOCK
×
×
×
×
Rear window defogger
REAR DEFOGGER
×
×
×
Warning chime
BUZZER
×
×
Interior room lamp timer
INT LAMP
×
×
×
Exterior lamp
HEADLAMP
×
×
×
Wiper and washer
WIPER
×
×
×
Turn signal and hazard warning lamps FLASHER
×
×
Air conditioner
AIR CONDITIONER
×
Intelligent Key system
INTELLIGENT KEY
×
×
×
×
Combination switch
COMB SW
×
BCM
BCM
×
×
×
×
×
Immobilizer
IMMU
×
×
×
Interior room lamp battery saver
BATTERY SAVER
×
×
Back door open
TRUNK
×
Vehicle security system
THEFT ALM
×
×
×
RAP system
RETAINED PWR
×
WCS
DIAGNOSIS SYSTEM (BCM)
WCS-15
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
BUZZER
BUZZER : CONSULT Function (BCM - BUZZER)
INFOID:0000000009764030
CAUTION:
After disconnecting the CONSULT vehicle interface (VI) from the data link connector, the ignition must
be cycled OFF
→ ON (for at least 5 seconds) → OFF. If this step is not performed, the BCM may not go
to ”sleep mode”, potentially causing a discharged battery and no-start condition.
DATA MONITOR
ACTIVE TEST
Signal buffer system
SIGNAL BUFFER
×
TPMS
AIR PRESSURE MONITOR
×
×
×
×
System
Sub System
Direct Diagnostic Mode
E
cu
Id
en
tifi
ca
tio
n
Se
lf Di
ag
no
st
ic Re
su
lt
Da
ta
Mo
ni
tor
A
cti
ve
T
est
W
o
rk
su
pp
ort
Co
nf
igu
rat
ion
CAN Diag
Support Mntr
Monitor Item [Unit]
Description
PUSH -SW [On/Off]
Indicates condition of push-button ignition switch.
UNLK SEN -DR [On/Off]
Indicates condition of door unlock sensor.
VEH SPEED 1 [km/h]
Indicates vehicle speed signal received from ABS on CAN communication line.
TAIL LAMP SW [On/Off]
Indicates condition of combination switch.
FR FOG SW [On/Off]
Indicates condition of front fog lamp switch.
DOOR SW-DR [On/Off]
Indicates condition of front door switch LH.
CDL LOCK SW [On/Off]
Indicates condition of lock signal from door lock and unlock switch.
Test Item
Description
SEAT BELT WARN TEST
This test is able to check seat belt warning chime operation [On/Off].
LIGHT WARN ALM
This test is able to check light warning chime operation [On/Off].
REVERSE WARNING
This test is able to check reverse warning chime operation [On/Off].
ID REGIST WARNING
This test is able to check TPMS transmitter ID regist warning chime operation [On/Off].
WCS-16
< ECU DIAGNOSIS INFORMATION >
BCM, COMBINATION METER
ECU DIAGNOSIS INFORMATION
BCM, COMBINATION METER
List of ECU Reference
INFOID:0000000009174320
ECU
Reference
BCM
BCS-50, "DTC Inspection Priority Chart"
COMBINATION METER
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст