Nissan Pathfinder. Manual — part 1195
BLOWER UNIT
VTL-19
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
BLOWER UNIT
Exploded View
INFOID:0000000009176706
REMOVAL
DISASSEMBLY
FRONT BLOWER UNIT
1. Front heating and cooling unit assembly
2. Steering member
ALIIA0562ZZ
1.
Front heating and cooling unit assembly
2.
Front evaporator
3.
Heater case side cover
4.
Air mix door motor (passenger)
5.
Distribution module
6.
Intake door motor
7.
Front blower motor
8.
Upper floor connecting duct (RH)
9.
Air mix door motor (rear)
10. In-cabin microfilter cover
11. In-cabin microfilter
12. Drain hose
13. Expansion valve grommet
14. Expansion valve
15. Front heater core
16. Air mix door motor (driver)
17. Aspirator hose
18. Upper floor connecting duct (LH)
19. Heater core pipe cover
20. Mode door motor
ALIIA0560ZZ
VTL-20
< REMOVAL AND INSTALLATION >
BLOWER UNIT
FRONT BLOWER UNIT : Removal and Installation
INFOID:0000000009176707
REMOVAL
1. Remove the front heating and cooling unit assembly. Refer to
HA-41, "HEATING AND COOLING UNIT
ASSEMBLY : Removal and Installation - Front Heating and Cooling Unit Assembly"
2. Remove the screws, then separate the front blower unit from the front heating and cooling unit assembly.
INSTALLATION
Installation is in the reverse order of removal.
FRONT BLOWER MOTOR
FRONT BLOWER MOTOR : Removal and Installation
INFOID:0000000009176708
REMOVAL
1. Remove glove box assembly. Refer to
IP-26, "Removal and Installation"
2. Disconnect the harness connector (A) from the front blower
motor.
3. Remove the screws (B) and the front blower motor (1).
INSTALLATION
Installation is in the reverse order of removal.
REAR BLOWER MOTOR 1 UNIT ASSEMBLY
REAR BLOWER MOTOR 1 UNIT ASSEMBLY : Removal and Installation
INFOID:0000000009176709
REMOVAL
1. Remove the center console assembly. Refer to
IP-18, "Removal and Installation"
2. Remove the center console bracket.
JMIIA0556ZZ
ALIIA0537ZZ
1. Center console assembly
2. Rear blower motor 1 unit assembly
3. Center console rear finisher
BLOWER UNIT
VTL-21
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
3. Disconnect the harness connectors from the rear blower motor 1 unit assembly.
4. Remove the bolts and the rear blower motor 1 unit assembly.
INSTALLATION
Installation is in the reverse order of removal.
REAR BLOWER MOTOR 1
REAR BLOWER MOTOR 1 : Removal and Installation
INFOID:0000000009176710
REMOVAL
1. Remove the rear blower motor 1 unit assembly. Refer to
VTL-20, "REAR BLOWER MOTOR 1 UNIT
ASSEMBLY : Removal and Installation"
2. Disconnect the harness connector from the rear blower motor 1.
3. Remove the screws and the rear blower motor 1.
INSTALLATION
Installation is in the reverse order of removal.
REAR BLOWER MOTOR 2
AWIIA1633ZZ
1. Rear blower motor 1 unit assembly
upper case
2. Rear shut-off door motor
3. Rear blower motor 1 unit assembly
lower case
4. Rear blower motor 1
5. Mode door motor (rear)
6. PTC heater
VTL-22
< REMOVAL AND INSTALLATION >
BLOWER UNIT
REAR BLOWER MOTOR 2 : Removal and Installation
INFOID:0000000009176711
REMOVAL
1. Remove the luggage side lower finisher (RH). Refer to
INT-31, "LUGGAGE SIDE LOWER FINISHER :
.
2. Remove the rear ventilator duct lower. Refer to
VTL-14, "REAR VENTILATOR DUCT LOWER : Removal
3. Disconnect the harness connector from the rear blower motor 2.
4. Remove the screws and the rear blower motor 2.
INSTALLATION
Installation is in the reverse order of removal.
ALIIA0532ZZ
1. Rear cooling unit assembly
2. Rear blower motor 2
Front
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст