Nissan Pathfinder. Manual — part 321
DLK-50
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (BCM)
WORK SUPPORT
IGN CONT2
This test is able to check ignition relay-2 control operation [On/Off].
ENGINE SW ILLUMI
This test is able to check push-button ignition switch START indicator operation [On/Off].
PUSH SWITCH INDICATOR
This test is able to check push-button ignition switch indicator operation [On/Off].
ACC CONT
This test is able to check accessory relay control operation [On/Off].
IGN CONT1
This test is able to check ignition relay-1 control operation [On/Off].
ST CONT LOW
This test is able to check starter control relay operation [On/Off].
IGNITION RELAY
This test is able to check ignition relay operation [On/Off].
REVERSE LAMP TEST
This test is able to check reverse lamp illumination operation [On/Off].
TRUNK/LUGGAGE LAMP TEST
This test is able to check cargo lamp illumination operation [On/Off].
KEYFOB PW TEST
This test is able to check power window operation using the Intelligent Key [P/W up/down
OFF/Send P/W down ON/Send P/W up ON].
SHIFTLOCK SOLENOID TEST
This test is able to check shift lock solenoid operation [On/Off].
Test Item
Description
Support Item
Setting
Description
IGN/ACC BATTERY SAVER
On*
Battery saver function ON.
Off
Battery saver function OFF.
ANSWERBACK I-KEY LOCK UNLOCK
BUZZER
Buzzer reminder function by door lock/unlock request switch ON.
HORN
Horn chirp reminder function by door lock request switch ON.
Off*
No reminder function by door lock/unlock request switch.
INVALID
This mode is not used.
ANSWERBACK KEYLESS LOCK UN-
LOCK
On
Buzzer or horn chirp reminder when doors are locked/unlocked with
Intelligent Key.
Off*
No buzzer or horn chirp reminder when doors are locked/unlocked
with Intelligent Key.
ANSWER BACK
On*
Horn chirp reminder when doors are locked with Intelligent Key.
Off
No horn chirp reminder when doors are locked with Intelligent Key.
RETRACTABLE MIRROR SET
On
Retractable mirror set ON.
Off*
Retractable mirror set OFF.
CONFIRM KEY FOB ID
—
Intelligent Key ID code registration can be checked.
LOCK/UNLOCK BY I-KEY
On*
Door lock/unlock function from Intelligent Key ON.
Off
Door lock/unlock function from Intelligent Key OFF.
ENGINE START BY I-KEY
On*
Engine start function from Intelligent Key ON.
Off
Engine start function from Intelligent Key OFF.
TRUNK/GLASS HATCH OPEN
On*
Buzzer reminder function by back door request switch ON.
Off
Buzzer reminder function by back door request switch OFF.
INTELLIGENT KEY LINK SET
On
Intelligent Key link set ON.
Off*
Intelligent Key link set OFF.
SHORT CRANKING OUTPUT
Start
70 msec
Starter motor operation duration times.
100 msec
200 msec
End
—
INSIDE ANT DIAGNOSIS
—
This function allows inside key antenna self-diagnosis.
DIAGNOSIS SYSTEM (BCM)
DLK-51
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
*: Initial Setting
TRUNK
TRUNK : CONSULT Function (BCM - TRUNK)
INFOID:0000000009764013
CAUTION:
After disconnecting the CONSULT vehicle interface (VI) from the data link connector, the ignition must
be cycled OFF
→ ON (for at least 5 seconds) → OFF. If this step is not performed, the BCM may not go
to ”sleep mode”, potentially causing a discharged battery and no-start condition.
DATA MONITOR
AUTO LOCK SET
MODE7
5 min
Auto door lock time can be set in this mode.
MODE6
4 min
MODE5
3 min
MODE4
2 min
MODE3*
1 min
MODE2
30 sec
MODE1
Off
Support Item
Setting
Description
Monitor Item [Unit]
Description
PUSH SW [On/Off]
Indicates condition of push-button ignition switch.
UNLK SEN -DR [On/Off]
Indicates condition of door unlock sensor.
VEH SPEED 1 [km/h]
Indicates vehicle speed signal received from ABS on CAN communication line.
TR/BD OPEN SW [On/Off]
Indicates condition of back door opener switch.
RKE-TR/BD [On/Off]
Indicates condition of back door open signal from Intelligent Key.
DLK-52
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (AUTOMATIC BACK DOOR CONTROL UNIT)
DIAGNOSIS SYSTEM (AUTOMATIC BACK DOOR CONTROL UNIT)
CONSULT Function
INFOID:0000000009175631
CAUTION:
After disconnecting the CONSULT vehicle interface (VI) from the data link connector, the ignition must
be cycled OFF
→ ON (for at least 5 seconds) → OFF. If this step is not performed, the BCM may not go
to ”sleep mode”, potentially causing a discharged battery and no-start condition.
APPLICATION ITEMS
CONSULT performs the following functions via CAN communication with automatic back door control module.
SELF DIAGNOSTIC RESULTS
.
DATA MONITOR
Diagnosis mode
Function Description
Self diagnostic result
Displays the diagnosis results judged by automatic back door control module
Data monitor
The automatic back door control module input/output signals are displayed
Work support
Changes the setting for each setting function.
ECU identification
The automatic back door control module part number is displayed
Monitor Item
Unit
Description
SPINDLE SENSOR LH
[Pulse]
Displays the condition of the LH encoder
SPINDLE LH SPEED
[mm/s]
Displays the LH spindle operation speed
SPINDLE MOTOR LH DUTY
[%]
Displays the condition of the spindle motor LH duty
VHCL SPEED MTR
[km/h]
Displays the vehicle speed signal received from combination meter by nu-
merical value
VHCL SPEED ABS
[km/h]
Displays the vehicle speed signal received from ABS actuator and electrical
unit by numerical value
MAIN SW
[ON/OFF]
Indicates condition of automatic back door main switch
AUTO BD SW
[ON/OFF]
Indicates condition of automatic back door switch
BK DOOR CL SW
[ON/OFF]
Indicates condition of automatic back door close switch
BACK DOOR LOCK STATUS
[ON/OFF]
Indicates condition of back door lock status
PKB SW
[ON/OFF]
Indicates condition of park brake switch
OPEN SW
[ON/OFF]
Indicates condition of open switch
CLOSE SW
[ON/OFF]
Indicates condition of close switch
HALF LATCH SW
[ON/OFF]
Indicates condition of half latch switch
TOUCH SEN RH
[ON/OFF/OPEN] Indicates condition of touch sensor RH
TOUCH SEN LH
[ON/OFF/OPEN] Indicates condition of touch sensor LH
P RANGE IND
[ON/OFF]
Indicates condition of P range signal from combination meter
RKE REQ
[OFF/MOVE/
REV]
Indicates condition of remote keyless entry signal from BCM
IGN SW
[ON/OFF]
Indicates condition of IGN power supply
SPINDLE LH ENCODER A
[LO/HI]
Indicates condition of encoder signal from encoder A
SPINDLE LH ENCODER B
[LO/HI]
Indicates condition of encoder signal from encoder B
UNLOCK SEN BD
[LOCKUNLKI]
Indicates condition of back door unlock sensor
DESTINATION
[JPN/NAM]
Indicates specification of destination of the automatic back door system
AUTO BCK DR POS INITIAL
[YET/DONE]
Indicates condition of calibration of automatic back door position informa-
tion
DIAGNOSIS SYSTEM (AUTOMATIC BACK DOOR CONTROL UNIT)
DLK-53
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
WORK SUPPORT
AUTO BCK DR POS LEARN
[YET/DONE]
Indicates condition of additional service when removing battery negative ca-
ble
SPINDLE SENSOR RH
[Pulse]
Displays the condition of the RH encoder
SPINDLE RH SPEED
[mm/s]
Displays the RH spindle operation speed
SPINDLE MOTOR RH DUTY
[%]
Displays the condition of the spindle motor RH duty
SPINDLE RH ENCODER A
[LO/HI]
Indicates condition of encoder signal from encoder A
SPINDLE RH ENCODER B
[LO/HI]
Indicates condition of encoder signal from encoder B
TRANSMISSION TYPE
[AT/CVT]
Indicates type of transmission the vehicle is equipped with
Monitor Item
Unit
Description
Work item
Description
Refer to
RESET AUTO BACK DOOR STA-
TUS
This item is for calibration of automatic back door position informa-
tion.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст