Nissan Pathfinder. Manual — part 687
PRECAUTIONS
HAC-9
< PRECAUTION >
[AUTOMATIC AIR CONDITIONING]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
Do not attempt to connect HFC-134a (R-134a) service couplers to a
CFC-12 (R-12) A/C system. The HFC-134a (R-134a) couplers will
not properly connect to the CFC-12 (R-12) system. However, if an
improper connection is attempted, discharging and contamination
may occur.
Shut-off valve rotation
A/C service valve
Clockwise
Open
Counterclockwise
Close
RHA273D
HAC-10
< PREPARATION >
[AUTOMATIC AIR CONDITIONING]
PREPARATION
PREPARATION
PREPARATION
Special Service Tool
INFOID:0000000009176775
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Commercial Service Tool
INFOID:0000000009176776
Tool number
(Kent-Moore No.)
Tool name
Description
—
(J-46534)
Trim Tool Set
Removing trim components
AWJIA0483ZZ
(Kent-Moore No.)
Tool name
Description
( — )
Power tool
Loosening nuts, screws and bolts
PIIB1407E
COMPONENT PARTS
HAC-11
< SYSTEM DESCRIPTION >
[AUTOMATIC AIR CONDITIONING]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
SYSTEM DESCRIPTION
COMPONENT PARTS
FRONT AUTOMATIC AIR CONDITIONING SYSTEM
FRONT AUTOMATIC AIR CONDITIONING SYSTEM : Component Parts Location
INFOID:0000000009176777
ALIIA0682ZZ
HAC-12
< SYSTEM DESCRIPTION >
[AUTOMATIC AIR CONDITIONING]
COMPONENT PARTS
FRONT AUTOMATIC AIR CONDITIONING SYSTEM : Component Description
INFOID:0000000009176778
1.
ECM
2.
BCM (view with combination meter
removed)
3.
IPDM E/R.
4.
A/C switch assembly (with base au-
dio system)
5.
A/C auto amp.
6.
A/C display unit (with base audio
system)
7.
Display unit (except base audio sys-
tem)
8.
A/C and AV switch assembly (except
base audio system)
9.
A/C auto amp.
10. AV control unit
11. Fuse block (J/B)
12. Fuse block (J/B)
13. Front blower motor relay
14. Accessory relay-2
15. A/C compressor
16. Sunload sensor
17. Refrigerant pressure sensor (view
with front bumper fascia removed)
18. Ambient sensor
19. In-vehicle sensor
20. Intake door motor (view with fresh air
intake duct removed from vehicle)
21. Front blower motor
22. Mode door motor (front) (view with
front A/C assembly removed from
vehicle)
23. Air mix door motor (driver side)
24. Air mix door motor (passenger side)
(view with front A/C assembly re-
moved from vehicle)
25. Intake sensor
ALIIA0683ZZ
Component
Description
A/C and AV switch assembly
(except base audio system)
Front A/C control operation signal is transmitted from the A/C and AV switch assembly to AV
control unit via communication line.
A/C display unit
(with base audio system)
The A/C display unit indicates operation status of the front and rear automatic air conditioning
system.
A/C switch assembly
(with base audio system)
The A/C switch assembly controls the operation of the A/C and heating system based on inputs
from the temperature control knob, the mode switches, the blower control dial, the ambient tem-
perature sensor, the intake sensor, and inputs received from the ECM via CAN communication.
Diagnosis of the A/C switch assembly can be performed using the CONSULT. There is no self-
diagnostic feature available.
A/C auto amp.
A/C auto amp. controls front automatic air conditioning system by inputting and calculating sig-
nals from each sensor and each switch.
A/C Compressor
Vaporized refrigerant is drawn into the A/C compressor from the evaporator, where it is com-
pressed to a high pressure, high temperature vapor. The hot, compressed vapor is then dis-
charged to the condenser.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст