Nissan Pathfinder. Manual — part 111
AV
MID AUDIO WITH BOSE
AV-271
< WIRING DIAGRAM >
[MID AUDIO WITH BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
ABNIA4809GB
AV-272
< WIRING DIAGRAM >
[MID AUDIO WITH BOSE]
MID AUDIO WITH BOSE
ABNIA4810GB
AV
DIAGNOSIS AND REPAIR WORKFLOW
AV-273
< BASIC INSPECTION >
[MID AUDIO WITH BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow
INFOID:0000000009174544
OVERALL SEQUENCE
Reference 1: Refer to
.
Reference 2: Refer to
.
DETAILED FLOW
1.
CHECK SYMPTOM
Check the malfunction symptoms by performing the following items:
• Interview the customer to obtain the malfunction information (conditions and environment when the malfunc-
tion occurred).
• Check the symptom.
>> GO TO 2
2.
SELF-DIAGNOSIS (CONSULT)
1. Connect CONSULT and perform “SELF-DIAGNOSIS” for “MULTI AV”.
NOTE:
Skip to step 4 of the diagnosis procedure if “MULTI AV” is not displayed.
2. Check if any DTC No. is displayed in the self-diagnosis results.
AWNIA2486GB
AV-274
< BASIC INSPECTION >
[MID AUDIO WITH BOSE]
DIAGNOSIS AND REPAIR WORKFLOW
Is any DTC No. displayed?
YES
>> GO TO 3
NO
>> GO TO 4
3.
CHECK SELF-DIAGNOSIS RESULTS (CONSULT)
1. Check the DTC No. indicated in the self-diagnosis results.
2. Perform the relevant diagnosis referring to the DTC No. list. Refer to
NOTE:
Start with the diagnosis for the CAN communication system if “CAN COMM CIRCUIT [U1000] or CONTROL
UNIT (CAN) [U1010]” is displayed.
>> GO TO 5
4.
PERFORM DIAGNOSIS BY SYMPTOM
Perform the relevant diagnosis referring to the diagnosis chart by symptom. Refer to
.
>> GO TO 5
5.
REPAIR OR REPLACE MALFUNCTIONING PARTS
Repair or replace the identified malfunctioning parts.
NOTE:
Erase the stored self-diagnosis results after repairing or replacing the relevant components if any DTC No. has
been indicated in the self-diagnosis results.
>> GO TO 6
6.
CHECK AFTER REPAIR
1. Perform self-diagnosis for “MULTI AV” with CONSULT after repairing or replacing the malfunctioning
parts.
2. Check if any DTC No. is displayed in the self-diagnosis results.
Is any DTC No. displayed?
YES
>> GO TO 3
NO
>> GO TO 7
7.
FINAL CHECK
Perform the operation check to confirm that the malfunction symptom is solved or that any other symptoms
are present.
Are any symptoms present?
YES
>> GO TO 4
NO
>> Inspection End.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст