Nissan Pathfinder. Manual — part 88
AV
STEERING SWITCH
AV-179
< DTC/CIRCUIT DIAGNOSIS >
[MID AUDIO WITHOUT BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
YES
>> GO TO 3.
NO
>> Repair or replace harness or connectors.
3.
CHECK COMBINATION SWITCH
Check continuity between combination switch connectors M30 and M149.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace spiral cable. Refer to
SR-15, "Removal and Installation"
4.
CHECK HARNESS BETWEEN COMBINATION METER AND AV CONTROL UNIT
1. Disconnect AV control unit connector M125.
2. Check continuity between combination meter connector M24 and AV control unit connector M125.
3. Check continuity between combination meter connector M24 and ground.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace harness or connectors.
5.
CHECK AV CONTROL UNIT VOLTAGE
1. Connect combination meter connector M125 and AV control unit connector M125.
2. Turn ignition switch ON.
3. Check the voltage between the terminals of AV control unit connector M125.
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-82, "Removal and Installation"
NO
>> Replace AV control unit. Refer to
AV-187, "Removal and Installation"
.
Combination switch
Continuity
Connector
Terminal
Connector
Terminal
M30
24
M149
14
Yes
31
15
33
17
Combination meter
AV control unit
Continuity
Connector
Terminal
Connector
Terminal
M24
14
M125
38
Yes
15
48
16
47
Combination meter
Ground
Continuity
Connector
Terminal
M24
14
—
No
15
16
AV control unit M125
Voltage
(Approx.)
(+)
(
−)
Terminal
Terminal
38
47
5.0 V
48
AV-180
< DTC/CIRCUIT DIAGNOSIS >
[MID AUDIO WITHOUT BOSE]
USB CONNECTOR
USB CONNECTOR
Diagnosis Procedure
INFOID:0000000009174494
Regarding Wiring Diagram information, refer to
1.
CHECK USB INTERFACE HARNESS CONTINUITY
1. Turn ignition switch OFF.
2. Disconnect AV control unit connector M145 and USB interface connector M209.
3. Check continuity between AV control unit connector M145 and USB interface connector M209.
4. Check continuity between AV control unit connector M145 and ground.
Is the inspection result normal?
YES
>> Replace the USB interface. Refer to
AV-195, "Removal and Installation"
.
NO
>> Repair or replace harness or connectors.
AV control unit
USB interface
Continuity
Connector
Terminal
Connector
Terminal
M145
121
M209
2
Yes
122
1
123
4
124
3
125
5
AV control unit
—
Continuity
Connector
Terminal
M145
121
Ground
No
123
AV
MULTI AV SYSTEM
AV-181
< SYMPTOM DIAGNOSIS >
[MID AUDIO WITHOUT BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SYMPTOM DIAGNOSIS
MULTI AV SYSTEM
Symptom Table
INFOID:0000000009174495
RELATED TO AUDIO
Symptoms
Check items
Probable malfunction location
The disk cannot be removed.
AV control unit
Malfunction in AV control unit.
Refer to
AV-63, "On Board Diagnosis Func-
.
No sound comes out or the level of the
sound is low.
No sound from all speakers.
• Speaker circuit shorted to ground.
Refer to
• AV control unit power supply and ground
circuits malfunction.
Refer to
.
Only a certain speaker (front door speaker
LH, front door speaker RH, front instrument
panel tweeter LH, front instrument panel
tweeter RH, rear door speaker LH, rear
door speaker RH) does not output sound.
• Poor connector connection of speaker.
• Sound signal circuit malfunction between
AV control unit and speaker.
Refer to:
-
door speaker).
-
(front in-
strument panel tweeter).
-
door speaker).
• Malfunction in speaker.
Refer to:
-
AV-192, "Removal and Installation"
(front
door speaker).
-
AV-193, "Removal and Installation"
(front
instrument panel tweeter).
-
AV-194, "Removal and Installation"
door speaker).
• Malfunction in AV control unit.
Refer to
.
AV-182
< SYMPTOM DIAGNOSIS >
[MID AUDIO WITHOUT BOSE]
MULTI AV SYSTEM
RELATED TO HANDS-FREE PHONE
• Before performing diagnosis, confirm that the cellular phone being used by the customer is compatible with
the vehicle.
• It is possible that a malfunction is occurring due to a version change of the phone even though the phone is
a compatible type. This can be confirmed by changing the cellular phone to another compatible type, and
check that it operates normally. It is important to determine whether the cause of the malfunction is the vehi-
cle or the cellular phone.
Noise is mixed with audio.
Noise comes out from all speakers.
Malfunction in AV control unit.
Refer to
AV-63, "On Board Diagnosis Func-
Noise comes out only from a certain speak-
er (front door speaker LH, front door speak-
er RH, front instrument panel tweeter LH,
front instrument panel tweeter RH, rear
door speaker LH, rear door speaker RH).
• Poor connector connection of speaker.
• Sound signal circuit malfunction between
AV control unit and speaker.
Refer to:
-
(front
door speaker).
-
(front in-
strument panel tweeter).
-
(rear
door speaker).
• Malfunction in speaker.
• Poor Installation of speaker (e.g. back-
lash and looseness).
Refer to:
-
AV-192, "Removal and Installation"
door speaker).
-
AV-193, "Removal and Installation"
instrument panel tweeter).
-
AV-194, "Removal and Installation"
(rear
door speaker).
• Malfunction in AV control unit.
Noise is mixed with radio only (when the ve-
hicle hits a bump or while driving over bad
roads)
Poor connector connection of antenna or
antenna feeder.
Refer to
AV-201, "Location of Antennas"
No radio reception or poor reception.
• Other audio sounds are normal.
• Any radio station cannot be received or
poor reception is caused even after mov-
ing to a service area with good reception
(e.g. a place with clear view and no ob-
stacles generating external noises).
• Antenna amp. ON signal circuit malfunc-
tion.
• Poor connector connection of antenna or
antenna feeder.
Refer to
AV-201, "Location of Antennas"
.
No satellite radio reception.
There is malfunction in the CONSULT self
diagnosis result.
Refer to
• Malfunction in antenna, antenna feeder
or AV control unit. Perform DTC diagno-
sis.
Refer to
• Poor continuity in antenna feeder.
• Poor connector connection of antenna or
antenna feeder.
Refer to
AV-201, "Location of Antennas"
.
There is no malfunction in the CONSULT
self diagnosis result.
Refer to
• Poor continuity in antenna feeder.
• Poor connector connection of antenna or
antenna feeder.
• Loose satellite radio antenna mounting
nut.
Refer to
AV-201, "Location of Antennas"
.
Buzz/rattle sound from speaker
The majority of buzz/rattle sounds are not
indicative of an issue with the speaker, usu-
ally something nearby the speaker is caus-
ing the buzz/rattle.
Refer to "SQUEAK AND RATTLE TROU-
BLE DIAGNOSIS" in the appropriate interi-
or trim section.
Symptoms
Check items
Probable malfunction location
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст