Nissan Pathfinder. Manual — part 692
SYSTEM
HAC-29
< SYSTEM DESCRIPTION >
[AUTOMATIC AIR CONDITIONING]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
When mode door motor (rear) is activated while air flow is more than the specified value, A/C auto amp.
reduces temporarily fan speed so that mode door (rear) moves smoothly.
REAR AUTOMATIC AIR CONDITIONING SYSTEM : Air Outlet Control
INFOID:0000000009176795
• While air outlet is in automatic control, A/C auto amp. selects the
mode door (rear) position depending on a target air mix door (rear)
angle and outlet air temperature calculated from sunload.
REAR AUTOMATIC AIR CONDITIONING SYSTEM : Door Control
INFOID:0000000009176796
DOOR MOTOR CONTROL
• LCU (Local Control Unit) is built in to each door motor, and detects door position by PBR (Potentio Balance
Resistor).
• A/C auto amp. communicates with each LCU via communication line and receives each door position feed
back signal from each LCU.
• Each LCU controls each door to the appropriate position depending on the control signal from A/C auto amp.
when the door movement is complete, transmits the signal of door movement completion to A/C auto amp.
SWITCHES AND THEIR CONTROL FUNCTION
JMIIA0733GB
ALIIA0553GB
HAC-30
< SYSTEM DESCRIPTION >
[AUTOMATIC AIR CONDITIONING]
SYSTEM
AIR DISTRIBUTION
REAR AUTOMATIC AIR CONDITIONING SYSTEM : Temperature Control
INFOID:0000000009176797
• When ignition switch is in the ON position, A/C auto amp. always
automatically controls temperature regardless of rear air condition-
ing operational state.
• A/C auto amp. calculates the target air mix door (rear) opening
angle depending on set temperature, ambient temperature, and
sunload.
• Air mix door (rear) is controlled depending on the comparison of
current air mix door (rear) opening angle and target air mix door
(front) opening angle.
• Regardless of ambient temperature, and sunload, air mix door
(rear) is fixed at the fully cold position when set temperature is
18.0
°C (60°F), and at the fully hot position when set temperature is
32.0
°C (90°F).
1.
Rear shut-off door
2.
Rear blower motor 1
3.
Mode door (rear)
4.
PTC heater
Recirculation air
Rear ventilator
Rear A/C foot
Switch/Dial position
Door position
Mode door (rear)
Rear shut-off door
AUTO switch
Front A/C control
AUTO
B
Rear air control
VENT
C
—
FOOT
D
—
OFF switch
AUTO
A
ALIIA0556ZZ
Discharge air flow
Mode position
Air outlet/distribution
VENT
FOOT
100%
—
—
100%
JMIIA0734GB
OPERATION
HAC-31
< SYSTEM DESCRIPTION >
[AUTOMATIC AIR CONDITIONING]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
OPERATION
FRONT AUTOMATIC AIR CONDITIONING SYSTEM
FRONT AUTOMATIC AIR CONDITIONING SYSTEM : Switch Name and Function
INFOID:0000000009176798
FRONT AIR CONTROLLER OPERATION (WITH BASE AUDIO SYSTEM)
A/C Display
Front air conditioning system state is indicated on the display.
Display Screen
Controller (A/C switch assembly)
Switch Operation
ALIIA0691ZZ
1.
DEF switch
2.
AUTO switch
3.
Temperature control (Driver side)
4.
A/C switch
5.
Fan switch
6.
DUAL switch
7.
Temperature control (passenger
side)
8.
MODE switch
9.
Intake switch
10. ON/OFF switch
ALIIA0688ZZ
A/C switch
Turns the compressor control (switch indicator) between ON
⇔ OFF each time while front blower fan
is activated.
NOTE:
• When front blower fan is OFF, the compressor control cannot be activated.
• When the compressor control (switch indicator) is in the OFF position, air inlet is fresh air intake.
AUTO switch
Turns the switch indicator lamp and "AUTO" indicator on the display ON, and then front air condition-
ing system becomes the following state.
• Air inlet: Automatic control
• Air outlet: Automatic control
• Blower fan: Automatic control
• Compressor: ON
HAC-32
< SYSTEM DESCRIPTION >
[AUTOMATIC AIR CONDITIONING]
OPERATION
Defroster (DEF) switch
Turns DEF mode (switch indicator) between ON
⇔ OFF each time.
When DEF switch is pressed while front air conditioning system is in the ON position.
• When DEF mode is turned ON, front air conditioning system becomes the following state.
- Air inlet: Fresh air intake
- Air outlet: DEF
- Blower fan: Automatic control (If fan speed other than AUTO is selected before pressing DEF
switch, fan speed is manual control.)
- Compressor: ON
• When DEF mode is turned OFF, front air conditioning system state returns to the previous state
before DEF mode is selected. But, the following state is continued.
- Air inlet: Fresh air intake
- Compressor: ON
When DEF switch is pressed while front air conditioning system is in the OFF position.
• When DEF mode is turned ON, front air conditioning system becomes the following state.
- Air inlet: Fresh air intake
- Air outlet: DEF
- Blower fan: Automatic control
- Compressor: ON
• When DEF mode is turned OFF, entire front air conditioning system is set to auto mode.
NOTE:
When DEF mode turns ON while front air conditioning system is in automatic control (“AUTO” is indi-
cated), automatic control is released (“AUTO” turns OFF).
DUAL switch
• Turns left and right ventilation temperature separately control (switch indicator) between ON
⇔
OFF each time.
• When DUAL switch indicator is ON, the driver side and passenger side temperatures can each be
set independently.
• When DUAL switch indicator is OFF, the driver side outlet and setting temperature is applied to both
sides.
• Left and right ventilation temperature separately control is cancelled by turning the DEF mode ON.
NOTE:
When front air conditioning system is in the OFF position, left and right ventilation temperature sepa-
rately control can be selected only while front air conditioning system state (when MODE switch is
pressed) is indicated on the display.
Fan switch
Blower fan speed is manually controlled with this switch.
NOTE:
• When fan switch is operated while front air conditioning system is in OFF, front air conditioning sys-
tem is activated. (Compressor control state returns to the previous state before front air condition-
ing system OFF.)
• When fan switch is operated while front air conditioning system is in automatic control (“AUTO” is
indicated), automatic control is released (“AUTO” turns OFF).
MODE switch
Selects air outlet sequentially from VENT
⇒ B/L ⇒ FOOT ⇒ D/F ⇒ VENT each time.
NOTE:
• When front air conditioning system is in the OFF position, air outlet can be selected.
• When MODE switch is pressed while front air conditioning system is in automatic control (“AUTO”
is indicated), automatic control is released (“AUTO” turns OFF).
ON/OFF switch
• Turns front air conditioning system ON/OFF.
• When front air conditioning system turns OFF, air inlet and air outlet become the automatic control.
Intake switch
Air inlet changes between recirculation (REC)
⇔ fresh air intake (FRE) each time this switch is
pressed.
• Intake switch indicator ON: Recirculation
• Intake switch indicator OFF: Fresh air intake
NOTE:
• When front air conditioning system is in the OFF position, air inlet can be selected.
• When MODE switch and DEF switch is in the D/F or DEF position, air inlet cannot be selected to
recirculation (REC).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст