Nissan X-Trail 32. Manual — part 714
DMS-4
< SYSTEM DESCRIPTION >
[ECO MODE]
COMPONENT PARTS
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location
INFOID:0000000010623742
LHD MODELS
Except for R9M Models
R9M Models
JSOIA1559ZZ
JSOIA1632ZZ
DMS
COMPONENT PARTS
DMS-5
< SYSTEM DESCRIPTION >
[ECO MODE]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
RHD MODELS
No.
Component
Function
TCM
• The TCM receives the following signal via CAN communications from the combi-
nation meter.
- ECO mode switch signal
• The TCM transmits the following signal via CAN communications to the ECM.
- ECO mode signal
Refer to
TM-235, "CVT CONTROL SYSTEM : Component Parts Location"
(Except
for R9M),
TM-466, "CVT CONTROL SYSTEM : Component Parts Location"
(R9M)
for detailed installation location.
ECM
• The ECM receives the following signal via CAN communications from the TCM.
- ECO mode signal
• The ECM transmits the following signal via CAN communications to the combina-
tion meter.
- ECO mode indicator signal
Refer to
EC-28, "ENGINE CONTROL SYSTEM : Component Parts Location"
(MR20DD),
EC-440, "Component Parts Location"
(QR25DE),
(R9M) for detailed installation location.
Combination meter
• The combination meter transmits the following signal via CAN communications to
the TCM.
- ECO mode switch signal
• The combination meter receives the following signal via CAN communications
from the ECM.
- ECO mode indicator signal
Refer to
MWI-7, "METER SYSTEM : Component Parts Location"
for detailed instal-
lation location.
ECO mode switch
Refer to
.
JSOIA1664ZZ
No.
Component
Function
Combination meter
• The combination meter transmits the following signal via CAN communications to
the TCM.
- ECO mode switch signal
• The combination meter receives the following signal via CAN communications
from the ECM.
- ECO mode indicator signal
Refer to
MWI-7, "METER SYSTEM : Component Parts Location"
for detailed instal-
lation location.
ECO mode switch
Refer to
.
DMS-6
< SYSTEM DESCRIPTION >
[ECO MODE]
COMPONENT PARTS
ECO Mode Switch
INFOID:0000000010623743
• The ECO mode switch is installed to the instrument lower panel.
• When the ECO mode indicator on the combination meter is OFF
and the ECO mode switch is pressed, the ECO mode is active and
the ECO mode indicator is ON.
• When the ECO mode indicator on the combination meter is ON
and the ECO mode switch is pressed, the ECO mode is cancelled
and the ECO mode indicator is OFF.
TCM
• The TCM receives the following signal via CAN communications from the combi-
nation meter.
- ECO mode switch signal
• The TCM transmits the following signal via CAN communications to the ECM.
- ECO mode signal
Refer to
TM-466, "CVT CONTROL SYSTEM : Component Parts Location"
for de-
tailed installation location.
ECM
• The ECM receives the following signal via CAN communications from the TCM.
- ECO mode signal
• The ECM transmits the following signal via CAN communications to the combina-
tion meter.
- ECO mode indicator signal
Refer to
EC-812, "Component Parts Location"
for detailed installation location.
No.
Component
Function
JSOIA0767ZZ
DMS
SYSTEM
DMS-7
< SYSTEM DESCRIPTION >
[ECO MODE]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
SYSTEM
ECO MODE CONTROL
ECO MODE CONTROL : System Description
INFOID:0000000010623744
SYSTEM DIAGRAM
SYSTEM DISCRIPTION
• TCM receives ECO mode switch signal (ON/OFF) from combination meter via CAN communication. TCM
transmits ECO mode signal to ECM via CAN communication according to the signal.
• ECM transmits ECO mode indicator signal to combination meter via CAN communication. Combination
meter displays ECO mode indicator according to the signal.
NOTE:
• When the ignition switch is turned ON while the ECO mode indicator stays ON, the ECO mode indicator
automatically turns ON at the next ignition switch ON.
• The ECO mode system cannot be turned off while the accelerator pedal is depressed even if the ECO mode
switch is pushed to OFF. (ECO mode indicator turns OFF.)
Release the accelerator pedal to turn off the ECO mode system.
(Except for R9M)
ECU Control
• For TCM control, refer to
TM-267, "ECO MODE SYSTEM : System Description"
(Except for R9M),
"ECO MODE SYSTEM : System Description"
• For ECM control, refer to
EC-65, "ECO MODE SYSTEM : System Description"
MODE CONTROL : System Description"
EC-868, "ECO MODE SYSTEM : System Description"
(R9M).
JSOIA0679GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст