Nissan X-Trail 32. Manual — part 724
PRECAUTIONS
EC-25
< PRECAUTION >
[MR20DD]
C
D
E
F
G
H
I
J
K
L
M
A
EC
N
P
O
• Do not depress accelerator pedal when starting.
• Immediately after starting, do not rev up engine unnecessar-
ily.
• Do not rev up engine just prior to shutdown.
• When installing C.B. ham radio or a mobile phone, be sure to
observe the following as it may adversely affect electronic
control systems depending on installation location.
- Keep the antenna as far as possible from the electronic con-
trol units.
- Keep the antenna feeder line more than 20 cm (8 in) away
from the harness of electronic controls.
Do not let them run parallel for a long distance.
- Adjust the antenna and feeder line so that the standing-wave
ratio can be kept smaller.
- Be sure to ground the radio to vehicle body.
SEF709Y
SEF708Y
EC-26
< PREPARATION >
[MR20DD]
PREPARATION
PREPARATION
PREPARATION
Special Service Tools
INFOID:0000000010775001
NOTE:
The actual shapes of the tools may differ from those illustrated here.
Commercial Service Tools
INFOID:0000000010775002
Tool number
(SPX-North America
No.)
Tool name
Description
KV10120000
Fuel tube adapter
Measures fuel pressure
JSBIA0410ZZ
Tool name
(SPX-North America
No.)
Description
Fuel pressure gauge
Measuring fuel pressure
Fuel filler cap adapter
i.e.: (MLR-8382)
Checks fuel tank vacuum relief valve opening
pressure
Socket wrench
Removes and installs engine coolant temperature
sensor
ZZA0061D
S-NT815
S-NT705
PREPARATION
EC-27
< PREPARATION >
[MR20DD]
C
D
E
F
G
H
I
J
K
L
M
A
EC
N
P
O
Oxygen sensor thread
cleaner
i.e.: (J-43897-18)
(J-43897-12)
Reconditions the exhaust system threads before
installing a new oxygen sensor. Use with anti-
seize lubricant shown below.
a: 18 mm diameter with pitch 1.5 mm for Zirco-
nia Oxygen Sensor
b: 12 mm diameter with pitch 1.25 mm for Tita-
nia Oxygen Sensor
Anti-seize lubricant
i.e.: (Permatex
TM
133AR or equivalent
meeting MIL specifica-
tion MIL-A-907)
Lubricates oxygen sensor thread cleaning tool
when reconditioning exhaust system threads.
Tool name
(SPX-North America
No.)
Description
AEM488
S-NT779
EC-28
< SYSTEM DESCRIPTION >
[MR20DD]
COMPONENT PARTS
SYSTEM DESCRIPTION
COMPONENT PARTS
ENGINE CONTROL SYSTEM
ENGINE CONTROL SYSTEM : Component Parts Location
INFOID:0000000010775003
ENGINE ROOM COMPARTMENT
ENIGNE COMPARTMENT
No.
Component
Function
1.
IPDM E/R
IPDM E/R control the internal relays and the actuators. And
when CAN communication with ECM is impossible, IPDM E/
R performs fail-safe control.
•
PCS-7, "RELAY CONTROL SYSTEM : System Descrip-
tion"
•
PCS-8, "RELAY CONTROL SYSTEM : Fail-safe"
•
PCS-11, "POWER CONTROL SYSTEM : System Descrip-
tion"
2.
Mass air flow sensor
(with intake air temperature sensor)
EC-35, "Mass Air Flow Sensor (With Intake Air Temperature
Sensor)"
3.
Electric throttle control actuator
(with built in throttle position sensor and throttle control mo-
tor)
EC-32, "Electric Throttle Control Actuator"
4.
EVAP canister purge volume control solenoid valve
EC-40, "EVAP Canister Purge Volume Control Solenoid
Valve"
5.
Intake manifold runner control valve
EC-38, "Intake Manifold Runner Control Valve"
6.
ECM
7.
Atmospheric pressure sensor
EC-39, "Atmospheric Pressure Sensor"
JSBIA5138ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст