Nissan X-Trail 32. Manual — part 1802
SE-56
< REMOVAL AND INSTALLATION >
SECOND SEAT (SLIDING TYPE)
b.
Disengage seatback board fixing clips, and then remove seat-
back board.
CAUTION:
Before installing the seatback board, check the engaging
direction of clip.
2.
Remove armrest bracket outer cover.
a.
Remove armrest bracket outer cover fixing screw
.
b.
Disengage armrest bracket outer cover fixing pawls using a
remover tool (A).
c.
Disengage armrest bracket outer cover fixing pawl using a
remover tool (A).
d.
Remove armrest bracket outer cover.
: Clip
JMJIA9654ZZ
JMJIA9655ZZ
: Pawl
JMJIA9656ZZ
: Pawl
JMJIA9657ZZ
JMJIA9658ZZ
SECOND SEAT (SLIDING TYPE)
SE-57
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
3.
Remove armrest fixing bolts
, and then remove armrest.
INSTALLATION
Install in the reverse order of removal.
ARMREST : Disassembly and Assembly
INFOID:0000000010713146
DISASSEMBLY
CAUTION:
When disassembly, always use a remover tool that is made of plastic to prevent damage to the parts.
Cup Holder
Disengage cup holder fixing metal clips and pawls using a remover
tool (A), and then remove cup holder.
Armrest Bracket Inner Cover
Remove armrest bracket inner cover fixing screw
, and then
remove armrest bracket inner cover.
Armrest Trim and Armrest Pad
1.
Remove center headrest.
2.
Remove cup holder.
JMJIA9659ZZ
: Pawl
: Metal clip
JMJIA9660ZZ
JMJIA9661ZZ
SE-58
< REMOVAL AND INSTALLATION >
SECOND SEAT (SLIDING TYPE)
3.
Remove the headrest holder by raising it while pinching the
pawls from the bottom of the headrest holder.
CAUTION:
Before installing headrest holder, check its orientation
(front/rear and right/left)
4.
Disengage armrest trim retainers
, and then remove armrest trim.
5.
Separate armrest pad and armrest frame.
ASSEMBLY
Assemble in the reverse order of disassembly.
SEATBACK
SEATBACK : Disassembly and Assembly
INFOID:0000000010713147
DISASSEMBLY
CAUTION:
When disassembly, always use a remover tool that is made of plastic to prevent damage to the parts.
1.
Remove center seat belt fixing bolt
, and then pull out center
seat belt.
2.
Remove armrest. Refer to
SE-55, "ARMREST : Removal and Installation"
.
3.
Remove seatback board RH.
PIIB4084J
JMJIA9662ZZ
JMJIA9663ZZ
SECOND SEAT (SLIDING TYPE)
SE-59
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
a.
Disengage tether anchor cover fixing pawls, and then remove
tether anchor (if equipped).
b.
Disengage seatback board fixing clips, and then remove seat-
back board.
CAUTION:
Before installing the seatback board, check the engaging
direction of clip.
4.
Disengage seatback trim fixing retainers
, and magic fasteners
.
5.
Disengage seat control lever escutcheon fixing pawls using a
remover tool (A), and then remove seat control escutcheon.
: Pawl
JMJIA9653ZZ
: Clip
JMJIA9664ZZ
Second seat LH
Second seat RH
JMJIA9665ZZ
: Pawl
JMJIA9666ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст