Nissan X-Trail 32. Manual — part 1885
VEHICLE SECURITY SYSTEM CANNOT BE SET
SEC-307
< SYMPTOM DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
NO
>> Check power door lock system (door lock function). Refer to
DLK-713, "ALL DOOR : Diagnosis
(With super lock) or
DLK-855, "ALL DOOR : Diagnosis Procedure"
(Without super
lock).
2.
CHECK HOOD SWITCH
Check hood switch. Refer to
SEC-297, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or Replace hood switch.
3.
REPLACE BCM
• Replace BCM. Refer to
BCS-121, "Removal and Installation"
• Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
SEC-308
< SYMPTOM DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
VEHICLE SECURITY ALARM DOES NOT ACTIVATE
VEHICLE SECURITY ALARM DOES NOT ACTIVATE
Description
INFOID:0000000010926618
Alarm does not operate when alarm operating condition is satisfied.
NOTE:
Check that vehicle is under the condition shown in “CONDITIONS OF VEHICLE (OPERATING CONDI-
TIONS)” before starting diagnosis, and check each symptom.
CONDITION OF VEHICLE (OPERATING CONDITIONS)
“SECURITY ALARM SET”: ON
Check the setting of “SECURITY ALARM SET” in “Work Support” mode of “THEFT ALM” of “BCM” using
CONSULT.
Diagnosis Procedure
INFOID:0000000010926619
1.
CHECK SENSOR CANCEL SWITCH
Check sensor cancel switch.
Refer to
SEC-301, "Diagnosis Procedure"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Replace sensor cancel switch.
2.
PERFORM SELF-DIAGNOSIS OF SIREN CONTROL UNIT
Perform self-diagnosis of siren control unit.
Refer to
SEC-238, "Diagnosis Description"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace malfunctioning parts.
3.
CHECK DOOR SWITCH
Check door switch.
Refer to
DLK-695, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace the malfunctioning door switch. Refer to
DLK-787, "Removal and Installation"
4.
CHECK HOOD SWITCH
Check hood switch.
Refer to
SEC-297, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Replace hood switch.
5.
CHECK INTRUDER SENSOR
Check intruder sensor.
Refer to
SEC-299, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Replace intruder sensor.
6.
REPLACE SIREN CONTROL UNIT
1.
Replace siren control unit.
2.
Confirm the operation after replacement.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> GO TO 7.
VEHICLE SECURITY ALARM DOES NOT ACTIVATE
SEC-309
< SYMPTOM DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
7.
REPLACE BCM
BCS-121, "Removal and Installation"
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
SEC-310
< SYMPTOM DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
INTRUDER SENSOR CANNOT BE DEACTIVATED
INTRUDER SENSOR CANNOT BE DEACTIVATED
Diagnosis Procedure
INFOID:0000000010926620
1.
CHECK SENSOR CANCEL SWITCH
Check sensor cancel switch.
Refer to
SEC-301, "Diagnosis Procedure"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Replace sensor cancel switch.
2.
REPLACE SIREN CONTROL UNIT
1.
Replace siren control unit.
2.
Confirm the operation after replacement.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> GO TO 3.
3.
REPLACE BCM
Replace BCM. Refer to
BCS-121, "Removal and Installation"
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст