Nissan X-Trail 32. Manual — part 592
UNLOCK SENSOR
DLK-709
< DTC/CIRCUIT DIAGNOSIS >
[TYPE 3]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
>> INSPECTION END
Component Inspection
INFOID:0000000010708387
1.
CHECK UNLOCK SENSOR
1.
Turn ignition switch OFF.
2.
Disconnect front door lock assembly (driver side) connector.
3.
Check continuity between front door lock assembly (driver side) terminals.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace front door lock assembly (driver side).
Front door lock assembly (driver side)
Condition
Continuity
Terminal
3
2
Driver door
Unlock
Existed
Lock
Not existed
DLK-710
< SYMPTOM DIAGNOSIS >
[TYPE 3]
ANTI-HIJACK FUNCTION DOES NOT OPERATE
SYMPTOM DIAGNOSIS
ANTI-HIJACK FUNCTION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000010735374
1.
CHECK “DOOR LOCK–UNLOCK SET” SETTING IN “WORK SUPPORT”
1.
Select “DOOR LOCK” of “BCM” using CONSULT.
2.
Select “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT” mode.
3.
Check “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT”
Refer to
DLK-658, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK) (Without Intelligent Key
.
Is the inspection result normal?
YES
>> GO TO 2
NO
>> Set “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT”.
2.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-121, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
AUTO DOOR LOCK OPERATION DOES NOT OPERATE
DLK-711
< SYMPTOM DIAGNOSIS >
[TYPE 3]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
AUTO DOOR LOCK OPERATION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000010708388
1.
CHECK “AUTO LOCK SET” SETTING WITH CONSULT
1.
Select “MULTI REMOTE ENT” of “BCM” using CONSULT.
2.
Select “AUTO LOCK SET” in “WORK SUPPORT” mode.
3.
Check “AUTO LOCK SET” setting in “WORK SUPPORT”.
Refer to
DLK-659, "MULTI REMOTE ENT : CONSULT Function (BCM - MULTI REMOTE ENT) (With
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Set “MODE 2”, “MODE 3”, “MODE 4”, “MODE 5”, “MODE 6” or “MODE 7” in “AUTO LOCK SET”.
2.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-121, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
DLK-712
< SYMPTOM DIAGNOSIS >
[TYPE 3]
BACK DOOR DOES NOT OPEN
BACK DOOR DOES NOT OPEN
Diagnosis Procedure
INFOID:0000000010708389
1.
CHECK BACK DOOR OPENER SWITCH
Check back door opener switch.
Refer to
DLK-684, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK BACK DOOR OPENER ACTUATOR
Check back door opener actuator.
Refer to
DLK-683, "Diagnosis Procedure"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-121, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст