Nissan X-Trail 32. Manual — part 40
AV-152
< WIRING DIAGRAM >
[WITH NAVIGATION]
NAVIGATION SYSTEM
JRNWD4142GB
AV
DIAGNOSIS AND REPAIR WORKFLOW
AV-153
< BASIC INSPECTION >
[WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
MULTI AV SYSTEM
MULTI AV SYSTEM : Work Flow
INFOID:0000000010714817
OVERALL SEQUENCE
• Reference 1··· Refer to
.
• Reference 2··· Refer to
.
• Reference 3··· Refer to
DETAILED FLOW
1.
INTERVIEW AND SYMPTOM CONFIRMATION
Check the malfunction symptoms by performing the following items.
• Interview the customer to obtain the malfunction information (conditions and environment when the malfunc-
tion occurred).
• Check the symptom.
Is the occurred symptom malfunction?
YES
>> GO TO 2.
NO
>> INSPECTION END
JSNIA4482GB
AV-154
< BASIC INSPECTION >
[WITH NAVIGATION]
DIAGNOSIS AND REPAIR WORKFLOW
2.
DIAGNOSIS WITH CONSULT
1.
Connect CONSULT and perform a self-diagnosis for “MULTI AV”. Refer to
NOTE:
Skip to step 4 of the diagnosis procedure if “MULTI AV” is not displayed.
2.
When DTC is detected, follow the instructions below:
-
Record DTC and Freeze Frame Data.
Is DTC displayed?
YES
>> GO TO 3.
NO
>> GO TO 4.
3.
TROUBLE DIAGNOSIS FOR DTC
1.
Check the DTC indicated in the self-diagnosis results.
2.
Perform the relevant diagnosis referring to the DTC Index. Refer to
>> GO TO 5.
4.
TROUBLE DIAGNOSIS FOR SYMPTOMS
Perform the relevant diagnosis referring to the diagnosis chart by symptom. Refer to
.
>> GO TO 5.
5.
ERROR PART REPAIR
1.
Repair or replace the identified malfunctioning parts.
2.
Perform a self-diagnosis for “MULTI AV” with CONSULT.
NOTE:
Erase the stored self-diagnosis results after repairing or replacing the relevant components if any DTC
has been indicated in the self-diagnosis results.
3.
Check that the symptom does not occur.
Does the symptom occur?
YES
>> GO TO 1.
NO
>> INSPECTION END
AROUND VIEW MONITOR SYSTEM
AV
DIAGNOSIS AND REPAIR WORKFLOW
AV-155
< BASIC INSPECTION >
[WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
AROUND VIEW MONITOR SYSTEM : Work Flow
INFOID:0000000010714818
OVERALL SEQUENCE
• Reference 1··· Refer to
.
• Reference 2··· Refer to
.
• Reference 3··· Refer to
DETAILED FLOW
1.
INTERVIEW AND SYMPTOM CONFIRMATION
Check the malfunction symptoms by performing the following items.
• Interview the customer to obtain the malfunction information (conditions and environment when the malfunc-
tion occurred).
• Check the symptom.
Is the occurred symptom malfunction?
YES
>> GO TO 2.
NO
>> INSPECTION END
2.
DIAGNOSIS WITH CONSULT
1.
Connect CONSULT and perform a self-diagnosis for “AVM”. Refer to
.
NOTE:
Skip to step 4 of the diagnosis procedure if “AVM” is not displayed.
2.
When DTC is detected, follow the instructions below:
JSNIA4482GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст