Nissan X-Trail 32. Manual — part 1888
SN-8
< SYSTEM DESCRIPTION >
[WITHOUT PARK ASSIST]
COMPONENT PARTS
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location
INFOID:0000000010735535
LHD MODELS
JSNIA7362ZZ
No.
Component
Function
ABS actuator and electric unit (control unit)
Transmits the vehicle speed signal to the sonar control unit via CAN communi-
cation.
Refer to
BRC-14, "Component Parts Location"
, for detailed installation location.
Corner sensor front RH
*
Refer to
.
Center sensor front RH
*
Refer to
.
Center sensor front LH
*
Refer to
.
Corner sensor front LH
*
Refer to
.
IPDM E/R (M/T models)
Transmits the gear position signal to the sonar control unit via CAN communi-
cation.
Refer to
PCS-5, "Component Parts Location"
, for detailed installation location.
SN
COMPONENT PARTS
SN-9
< SYSTEM DESCRIPTION >
[WITHOUT PARK ASSIST]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
*: With front soner sensor (6 sensor) models.
TCM (CVT models)
Transmits the shift position signal to the sonar control unit via CAN communi-
cation.
Refer to the following, for detailed installation location.
• RE0F10D:
TM-235, "CVT CONTROL SYSTEM : Component Parts Location"
TM-466, "CVT CONTROL SYSTEM : Component Parts Location"
Buzzer (backward)
*
Sonar control unit
Corner sensor rear LH
.
Center sensor rear LH
.
Center sensor rear RH
.
Corner sensor rear RH
.
NAVI control unit (With navigation)
When receiving a sonar indicator display signal from the sonar control unit, the
around view monitor control unit synthesizes sonar indicator with a camera im-
age and transmits to an NAVI control unit.
Refer to
AV-64, "Component Parts Location"
, for detailed installation location.
Combination meter
• The sonar control unit transmits the sonar indicator display signal to the com-
bination meter via CAN communication.
• The combination meter shows the sonar indicator on the information display,
according to the signal.
Refer to
MWI-7, "METER SYSTEM : Component Parts Location"
, for detailed
installation location.
Sonar system switch
*
.
Buzzer (frontward)
Refer to
Around view monitor control unit (With
around view monitor)
When receiving a sonar indicator display signal from the sonar control unit, the
around view monitor control unit synthesizes sonar indicator with a camera im-
age and transmits to an AV control unit or audio unit.
Refer to
AV-64, "Component Parts Location"
, for detailed installation location.
No.
Component
Function
SN-10
< SYSTEM DESCRIPTION >
[WITHOUT PARK ASSIST]
COMPONENT PARTS
RHD MODELS
JSNIA7363ZZ
No.
Component
Function
Corner sensor front RH
*
Refer to
.
Center sensor front RH
*
Refer to
.
Center sensor front LH
*
Refer to
.
Corner sensor front LH
*
Refer to
.
IPDM E/R (M/T models)
Transmits the gear position signal to the sonar control unit via CAN communi-
cation.
Refer to
PCS-5, "Component Parts Location"
, for detailed installation location.
TCM (CVT models)
Transmits the shift position signal to the sonar control unit via CAN communi-
cation.
Refer to the following, for detailed installation location.
• RE0F10D:
TM-235, "CVT CONTROL SYSTEM : Component Parts Location"
TM-466, "CVT CONTROL SYSTEM : Component Parts Location"
ABS actuator and electric unit (control unit)
Transmits the vehicle speed signal to the sonar control unit via CAN communi-
cation.
Refer to
BRC-14, "Component Parts Location"
, for detailed installation location.
Buzzer (backward)
*
Refer to
.
Sonar control unit
.
Corner sensor rear LH
Refer to
.
SN
COMPONENT PARTS
SN-11
< SYSTEM DESCRIPTION >
[WITHOUT PARK ASSIST]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
*: With front soner sensor (6 sensor) models .
Sonar Control Unit
INFOID:0000000010735536
DESCRIPTION
• The warning buzzer outputs by inputting the sensor signal from
sonar sensor. The warning buzzer outputs the separated buzzer.
• The sonar indicator shows a warning according to a sensor signal
received from the sonar sensor.
NOTE:
The information display of the combination meter displays a dis-
tance between an obstacle and the sensor as well.
Sonar System Switch
INFOID:0000000010787425
• The sonar system switch is installed instrument lower panel LH
(LHD models) or instrument lower panel RH (RHD models).
• The sonar system switch signal is transmitted to the sonar control
unit.
• Non-operational status or standby status of the sonar system
(obstacle detection function) can be selected using sonar system
switch.
• Sonar system indicator lamp indicates the operation status of func-
tion.
Center sensor rear LH
.
Center sensor rear RH
.
Corner sensor rear RH
.
Combination meter
• The sonar control unit transmits the sonar indicator display signal to the com-
bination meter via CAN communication.
• The combination meter shows the sonar indicator on the information display,
according to the signal.
Refer to
MWI-7, "METER SYSTEM : Component Parts Location"
, for detailed
installation location.
NAVI control unit (With navigation)
When receiving a sonar indicator display signal from the sonar control unit, the
around view monitor control unit synthesizes sonar indicator with a camera im-
age and transmits to an NAVI control unit.
Refer to
AV-64, "Component Parts Location"
, for detailed installation location.
Around view monitor control unit (With
around view monitor)
When receiving a sonar indicator display signal from the sonar control unit, the
around view monitor control unit synthesizes sonar indicator with a camera im-
age and transmits to an AV control unit or audio unit.
Refer to
AV-64, "Component Parts Location"
, for detailed installation location.
Buzzer (frontward)
Refer to
Sonar system switch
*
.
No.
Component
Function
JSNIA5812ZZ
Sonar system indicator lamp
Sonar system
ON
Standby status
OFF
Non-operational status
JSNIA7364ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст