Nissan X-Trail 32. Manual — part 1331
GW-42
< REMOVAL AND INSTALLATION >
FRONT DOOR GLASS
6.
Reconnect power window main switch.
7.
Fully close front door glass.
8.
Disengage front door glass run
from front door lower sash
.
9.
Remove front door lower sash mounting bolt
.
10. Disengage front door lower sash from open part of front door panel as shown by the arrow in the figure.
11. Remove front door lower sash from open part of front door panel as shown by the arrow in the figure.
JMKIB3131ZZ
JMKIB3133ZZ
JMKIB3134ZZ
JMKIB3135ZZ
JMKIB3136ZZ
FRONT DOOR GLASS
GW-43
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
GW
N
O
P
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Make sure that front door lower sash and front door sash
(door panel side) are engaged.
• Make sure that front door glass run are engaged to front door lower sash and front door sash (door
panel side).
• Tighten front door regulator mounting bolts to the specified torque. Refer to
FRONT DOOR GLASS RUN LOWER SASH
FRONT DOOR GLASS RUN LOWER SASH : Removal and Installation
INFOID:0000000010755109
REMOVAL
CAUTION:
Never damage front door glass and front door panel.
1.
Remove front door inside handle. Refer to the following.
• Type 1: Refer to
DLK-303, "INSIDE HANDLE : Removal and Installation"
• Type 2: Refer to
DLK-611, "INSIDE HANDLE : Removal and Installation"
• Type 3: Refer to
DLK-774, "INSIDE HANDLE : Removal and Installation"
• Type 4: Refer to
DLK-916, "INSIDE HANDLE : Removal and Installation"
2.
Disconnect door mirror harness connector
and BSW indicator
harness connector
.
NOTE:
As per BSW indicator harness connector, only with BSW indica-
tor can be applied.
3.
Remove BSW indicator harness connector fixing clip
, door
mirror harness connector fixing clips
and harness fixing clip
.
NOTE:
As per BSW indicator harness connector, only with BSW indica-
tor can be applied.
JMKIB3142ZZ
JMKIB3127ZZ
JMKIB3128ZZ
GW-44
< REMOVAL AND INSTALLATION >
FRONT DOOR GLASS
4.
Disconnect front door speaker harness connector
, and then
remove harness fixing clip
.
5.
Cut butyl-tape inside of front door sealing screen by using cutter knife (A).
CAUTION:
Cut the butyl-tape so that remain on front door sealing screen, if the front door sealing screen is
reused.
6.
Reconnect power window main switch.
7.
Fully close front door glass.
8.
Remove front door glass run lower sash mounting bolt
.
JMKIB3129ZZ
JMKIB3130ZZ
JMKIB3131ZZ
JMKIB3137ZZ
FRONT DOOR GLASS
GW-45
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
GW
N
O
P
9.
Disengage front door glass run lower sash from open part of front door panel as shown by the arrow in the
figure.
10. Remove front door glass run lower sash from open part of front door panel as shown by the arrow in the
figure.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Make sure that front door glass run lower sash and front door
sash (door panel side) are engaged.
• Make sure that front door glass run are engaged to front door glass run lower sash and front door
sash (door panel side).
• Tighten front door regulator mounting bolts to the specified torque. Refer to
FRONT DOOR GLASS RUN
FRONT DOOR GLASS RUN : Removal and Installation
INFOID:0000000010755110
REMOVAL
CAUTION:
Never excessively pull front door glass run.
1.
Remove front door glass. Refer to
GW-38, "FRONT DOOR GLASS : Removal and Installation"
.
2.
Remove front door glass run lower sash. Refer to
GW-43, "FRONT DOOR GLASS RUN LOWER SASH :
.
JMKIB3138ZZ
JMKIB3139ZZ
JMKIB3142ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст