Nissan X-Trail 32. Manual — part 1196
SYSTEM
EXL-241
< SYSTEM DESCRIPTION >
[HALOGEN HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
PARKING, LICENSE PLATE AND TAIL LAMP SYSTEM : Circuit Diagram
INFOID:0000000010789796
JMLIA5523GB
EXL-242
< SYSTEM DESCRIPTION >
[HALOGEN HEADLAMP]
SYSTEM
PARKING, LICENSE PLATE AND TAIL LAMP SYSTEM : Fail-safe
INFOID:0000000010789797
FAIL-SAFE CONTROL BY DTC
IPDM E/R performs fail-safe control when any DTC are detected.
CAN COMMUNICATION CONTROL
When CAN communication with BCM is impossible, IPDM E/R performs fail-safe control. After CAN communi-
cation recovers normally, it also returns to normal control.
If No CAN Communication Is Available With BCM
STOP LAMP SYSTEM
JMLIA5384GB
DTC
CONSULT display description
Fail-safe
B20D2
PARKING LAMP PWR SPLY CIRC
[CIRC
SHORT TO
GRND]
Shuts off the power supply to the parking lamp (LH/RH)
power supply circuit until the parking lamp, license plate
lamp, and tail lamp ON conditions are no longer satisfied.
B20D4
TAIL LAMP LH PWR SPLY CIRC
[CIRC
SHORT TO
GRND]
Shuts off the power supply to the following power supply
circuits until the parking lamp, license plate lamp, and tail
lamp ON conditions are no longer satisfied.
• Tail lamp LH (body side)
• Tail lamp LH (back door side)
• License plate lamp LH
• License plate lamp RH
B20D5
TAIL LAMP RH PWR SPLY CIRC
[CIRC
SHORT TO
GRND]
Shuts off the power supply to the following power supply
circuits until the parking lamp, license plate lamp, and tail
lamp ON conditions are no longer satisfied.
• Tail lamp RH (body side)
• Tail lamp RH (back door side)
Control part
Fail-safe operation
• Parking lamp
• License plate lamp
• Tail lamp
• Turns ON the tail lamp, parking lamp and license plate lamp when the ignition switch is turned
ON.
• Turns OFF the tail lamp, parking lamp and license plate lamp when the ignition switch is turned
OFF.
SYSTEM
EXL-243
< SYSTEM DESCRIPTION >
[HALOGEN HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
STOP LAMP SYSTEM : System Description
INFOID:0000000010789798
SYSTEM DIAGRAM
OUTLINE
Stop lamp and high-mounted stop lamp is controlled by combination switch reading function and the stop lamp
and high-mounted stop lamp control function of BCM, and forward emergency braking function of ABS actua-
tor and electric unit (control unit).
STOP LAMP AND HIGH-MOUNTED STOP LAMP OPERATION
• BCM detects the brake pedal position status from stop lamp switch.
• BCM supplies voltage to stop lamp and high-mounted stop lamp according to the stop lamp and high-
mounted stop lamp ON condition.
Stop lamp and high-mounted stop lamp ON condition
- Brake pedal is depressed
FORWARD EMERGENCY BRAKING FUNCTION
• When the forward emergency braking operates, the ABS actuator and electric unit (control unit) transmits
the stop lamp request signal to BCM via CAN communication. (For details about the forward emergency
braking, refer to
• When BCM receives the stop lamp request signal from the ABS actuator and electric unit (control unit), it
supplies power to the stop lamp and high-mounted stop lamp systems, turning ON the stop lamp and high-
mounted stop lamp.
JMLIA5234GB
EXL-244
< SYSTEM DESCRIPTION >
[HALOGEN HEADLAMP]
SYSTEM
STOP LAMP SYSTEM : Circuit Diagram
INFOID:0000000010789799
NOTE:
ABS actuator and electric unit (control unit) is not used.
FRONT FOG LAMP SYSTEM
JMLIA5524GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст