Nissan X-Trail 32. Manual — part 193
BRC-238
< SYSTEM DESCRIPTION >
[FORWARD EMERGENCY BRAKING]
OPERATION
OPERATION
Switch Name and Function
INFOID:0000000010721665
Menu Displayed by Pressing Each Switch
INFOID:0000000010721666
SYSTEM DISPLAY
DISPLAY AND WARNING
Setting Display
JSOIA1622ZZ
No.
Switch name
Description
FEB system setting screen
(Information display)
The setting of FEB system can be switched between ON and OFF
JSOIA1623ZZ
No.
Switch name
Description
FEB warning lamp
• FEB warning lamp indicates that an abnormal condition is present in FEB system
• When the FEB system turns OFF, the FEB warning lamp will illuminate.
FEB system indicator
(Warning systems indicator)
• Indicates that FEB system is ON
• Blinks when approaching vehicle ahead
FEB system indicator “Forward” po-
sition
• Indicates that FEB system is ON
• Blinks when approaching vehicle ahead
FEB warning
Displays immediately before the harder brake operates
OPERATION
BRC-239
< SYSTEM DESCRIPTION >
[FORWARD EMERGENCY BRAKING]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
N
O
P
Warning Operation
Warning Display
System status
Condition
Display on combination meter
Display on combination meter
FEB warn-
ing lamp
Buzzer
Upper part
Middle part
FEB OFF
—
—
—
FEB ON
System ON
White
White
OFF
—
JSOIA1624ZZ
JSOIA1428ZZ
JSOIA1625ZZ
System status
Action
Display on combination meter
Display on combination meter
FEB warn-
ing lamp
Buzzer
Upper part
Middle part
There is a
possibility of a
collision with
the vehicle
ahead
Partial brake
Yellow (Blink)
Yellow (Blink)
Short con-
tinuous
beeps
An obstacle
ahead is
avoided due to
the system ap-
plying braking.
Harder brake
Red
⇔
White
Yellow (Blink)
Continu-
ous beeps
JSOIA1290ZZ
JSOIA1625ZZ
JSOIA1477ZZ
JSOIA1625ZZ
BRC-240
< SYSTEM DESCRIPTION >
[FORWARD EMERGENCY BRAKING]
OPERATION
NOTE:
*: The system operates if the ignition switch is turned OFF
⇒
ON after the condition improves
System sta-
tus
Condition
Display on combination meter
Display on combination meter
FEB
warn-
ing
lamp
Master
warn-
ing
lamp
Buzzer
Upper part
Middle part
FEB system
malfunction
The FEB sys-
tem is auto-
matically
canceled.
*
Yellow (Blink)
Yellow
Yellow
Beep
Dirt around
the distance
sensor
Yellow (Blink)
Yellow
Yellow
Beep
JSOIA1290ZZ
JSOIA1625ZZ
JSOIA1290ZZ
JSOIA1625ZZ
HANDLING PRECAUTION
BRC-241
< SYSTEM DESCRIPTION >
[FORWARD EMERGENCY BRAKING]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
N
O
P
HANDLING PRECAUTION
Description
INFOID:0000000010721667
PRECAUTIONS FOR FORWARD EMERGENCY BRAKING
• The forward emergency braking system is a supplemental aid to the driver. It is not a replacement for the
driver’s attention to traffic conditions or responsibility to drive safely. It cannot prevent accidents due to care-
lessness or dangerous driving techniques.
• The forward emergency braking system does not function in all driving, traffic, weather and road conditions.
• The radar sensor has some performance limitations. If a stationary vehicle is in the vehicle’s path, the for-
ward emergency braking system will not function when the vehicle is driven at speeds over approximately 80
km/h (50 MPH).
• The distance sensor does not detect the following objects:
- Pedestrians, animals, or obstacles in the roadway
- Oncoming vehicles
- Crossing vehicles
• The distance sensor may not detect a vehicle ahead in the following conditions:
- Dirt, ice, snow or other material covering the radar sensor.
- Interference by other radar sources.
- Snow or road spray from traveling vehicles.
- If the vehicle ahead is narrow (e.g.motorcycle)
- When driving on a steep downhill slope or roads with sharp curves.
- When towing a trailer.
• In some road or traffic conditions, the forward emergency braking system may unexpectedly apply partial
braking. When acceleration is necessary, continue to depress the accelerator pedal to override the system.
• Braking distances increase on slippery surfaces.
• Excessive noise will interfere with the warning chime sound, and the chime may not be heard.
• The system is designed to automatically check the sensor’s functionality, within certain limitations. The sys-
tem may not detect some forms of obstruction of the sensor area of the front bumper such as ice, snow,
stickers, for example. In these cases, the system may not be able to warn the driver properly. Be sure that
check, clean and clear the sensor area of the front bumper regularly.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст