Nissan X-Trail 32. Manual — part 1859
VEHICLE SECURITY SYSTEM CANNOT BE SET
SEC-203
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
VEHICLE SECURITY SYSTEM CANNOT BE SET
INTELLIGENT KEY
INTELLIGENT KEY : Description
INFOID:0000000010922245
Armed phase is not activated when door is locked using Intelligent Key.
NOTE:
Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and check
each symptom.
CONDITION OF VEHICLE (OPERATING CONDITION)
Confirm that the setting of “SECURITY ALARM SET” is “ON” in “WORK SUPPORT” mode of “THEFT ALM”of
“BCM” using CONSULT.
INTELLIGENT KEY : Diagnosis Procedure
INFOID:0000000010922246
1.
CHECK INTELLIGENT KEY SYSTEM (REMOTE KEYLESS ENTRY FUNCTION)
Lock/unlock door with Intelligent Key.
Refer to
DLK-47, "REMOTE KEYLESS ENTRY FUNCTION : System Description"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Check Intelligent Key system (remote keyless entry function). Refer to
2.
CHECK HOOD SWITCH
Check hood switch.
Refer to
SEC-192, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Replace hood lock assembly. Refer to
DLK-297, "HOOD LOCK : Removal and Installation"
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
DOOR REQUEST SWITCH
DOOR REQUEST SWITCH : Description
INFOID:0000000010922247
Armed phase is not activated when door is locked using door request switch.
NOTE:
Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and check
each symptom.
CONDITION OF VEHICLE (OPERATING CONDITION)
Confirm that the setting of “SECURITY ALARM SET” is “ON” in “WORK SUPPORT” mode of “THEFT ALM”of
“BCM” using CONSULT.
DOOR REQUEST SWITCH : Diagnosis Procedure
INFOID:0000000010922248
1.
CHECK INTELLIGENT KEY SYSTEM (DOOR LOCK FUNCTION)
Lock/unlock door with door request switch.
Refer to
DLK-42, "DOOR LOCK FUNCTION : System Description"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Check Intelligent Key system (door lock function). Refer to
SWITCHES : Diagnosis Procedure"
.
SEC-204
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
VEHICLE SECURITY SYSTEM CANNOT BE SET
2.
CHECK HOOD SWITCH
Check hood switch.
Refer to
SEC-192, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Replace hood lock assembly. Refer to
DLK-297, "HOOD LOCK : Removal and Installation"
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
NO
>> GO TO 1.
VEHICLE SECURITY ALARM DOES NOT ACTIVATE
SEC-205
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
VEHICLE SECURITY ALARM DOES NOT ACTIVATE
Description
INFOID:0000000011009366
Alarm does not operate when alarm operating condition is satisfied.
Diagnosis Procedure
INFOID:0000000011009367
1.
CHECK SENSOR CANCEL SWITCH
Check sensor cancel switch.
Refer to
SEC-196, "Diagnosis Procedure"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Replace sensor cancel switch.
2.
PERFORM SELF-DIAGNOSIS OF SIREN CONTROL UNIT
Perform self-diagnosis of siren control unit.
Refer to
SEC-64, "Diagnosis Description"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace malfunctioning parts.
3.
CHECK DOOR SWITCH
Check door switch.
Refer to
DLK-186, "Component Function Check"
(TYPE 1) or
DLK-495, "Component Function Check"
(TYPE 2).
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace the malfunctioning door switch. Refer to
DLK-319, "Removal and Installation"
(TYPE 1)
or
DLK-626, "Removal and Installation"
(TYPE 2).
4.
CHECK HOOD SWITCH
Check hood switch.
Refer to
SEC-192, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Replace hood lock assembly. Refer to
DLK-297, "HOOD LOCK : Removal and Installation"
(TYPE
1) or
DLK-605, "HOOD LOCK : Removal and Installation"
(TYPE 2).
5.
CHECK INTRUDER SENSOR
Check intruder sensor.
Refer to
SEC-194, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Replace intruder sensor.
6.
REPLACE SIREN CONTROL UNIT
1.
Replace siren control unit.
2.
Confirm the operation after replacement.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> GO TO 7.
7.
REPLACE BCM
BCS-121, "Removal and Installation"
Is the inspection result normal?
YES
>> INSPECTION END
SEC-206
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
VEHICLE SECURITY ALARM DOES NOT ACTIVATE
NO
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст