Nissan X-Trail 32. Manual — part 214
BODY COMPONENT PARTS
BRM-17
< PREPARATION >
[FOR EUROPE (LHD)]
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
CAUTION:
If the high strength steel (ultra high strength steel) of this is broken, replace by assembly for the supply part.
NOTE:
• For the parts without a number described in the figure, it is supplied only with the assembly part that the part is included with.
• Tensile strength column shows the largest strength value of a part in the component part.
Body Component Parts
INFOID:0000000010843421
Refer to parts catalogue for the replacement parts.
Rear floor front extension (Lower)
Under 440
×
Rear crossmember center assembly
590
×
Rear side member (RH & LH)
590
×
Muffler mounting bracket assembly (RH & LH)
Under 440
×
Rear side member extension (RH & LH)
780
×
Rear 3rd seat mounting bracket assembly (RH & LH)
Under 440
×
No.
Parts name
Tensile strength
(MPa)
Both sided
anti-corrosive
precoated
steel sections
BRM-18
< PREPARATION >
[FOR EUROPE (LHD)]
BODY COMPONENT PARTS
Sunroof models
Normal roof models
Right side
: Both sided anti-corrosive precoated steel sections
: High strength steel (HSS) sections
: Both sided anti-corrosive steel and HSS sections
JSKIA4702ZZ
BODY COMPONENT PARTS
BRM-19
< PREPARATION >
[FOR EUROPE (LHD)]
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
No.
Parts name
Tensile strength
(MPa)
Both sided
anti-corrosive
precoated
steel sections
Roof
Under 440
—
Front roof rail
Under 440
—
Roof bow No.4
Under 440
—
Roof bow No.5
Under 440
—
Rear roof rail
Under 440
—
Roof bow No.1
Under 440
—
Roof bow No.2
Under 440
—
Roof bow No.3
Under 440
—
Upper inner front pillar (RH & LH)
590
—
Inner center pillar assembly (RH & LH)
d.
980MPa
caution
T=1.0 mm (0.039 in)
590
—
Hood
440
×
Front fender (RH & LH)
Under 440
×
Side body assembly (RH & LH)
Refer to No.
−
Outer front pillar reinforcement (RH & LH)
e.
980MPa
caution
T=1.0 mm (0.039 in)
590
—
Lower center pillar brace (RH & LH)
f.
980MPa
caution
T=1.0 mm (0.039 in)
590
—
g.
980MPa
caution
T=1.0 mm (0.039 in)
Outer front side body (RH & LH)
Under 440
×
Lower front pillar hinge brace (RH & LH)
590
—
Front fender bracket assembly (RH & LH)
Under 440
×
Outer sill reinforcement (RH & LH)
590
×
Outer sill assembly (RH & LH)
Under 440
×
Inner rear pillar (RH & LH)
590
—
Upper rear pillar reinforcement (RH & LH)
Under 440
—
Back pillar assembly (Inner RH & LH)
SUV models
440
—
Wagon models
590
Inner rear wheelhouse (RH & LH)
Under 440
×
Inner rear wheelhouse rear extension (RH & LH)
Under 440
×
Outer rear wheelhouse extension (RH & LH)
Under 440
×
Outer rear wheelhouse (RH & LH)
Under 440
×
Jack mounting bracket
Under 440
—
Front door assembly (RH & LH)
590
×
Outer front door panel (RH & LH)
Under 440
×
Rear door assembly (RH & LH)
440
×
Outer rear door panel (RH & LH)
Under 440
×
BRM-20
< PREPARATION >
[FOR EUROPE (LHD)]
BODY COMPONENT PARTS
CAUTION:
If the high strength steel (ultra high strength steel) of this is broken, replace by assembly for the supply part.
NOTE:
• For the parts without a number described in the figure, it is supplied only with the assembly part that the part is included with.
• Tensile strength column shows the largest strength value of a part in the component part.
Rear fender assembly (RH & LH)
Under 440
×
Outer back pillar (RH & LH)
Under 440
—
Back pillar assembly (Outer RH & LH)
Under 440
—
Rear fender extension (RH & LH)
Under 440
×
Fuel filler lid assembly
Under 440
×
Upper rear panel
Under 440
×
Upper rear bumper retainer
Under 440
×
Rear bumper stay (RH & LH)
590
—
Inner center rear bumper reinforcement
1270MPa
caution
T=1.2 mm (0.047 in)
—
—
No.
Parts name
Tensile strength
(MPa)
Both sided
anti-corrosive
precoated
steel sections
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст