Nissan X-Trail 32. Manual — part 1226
EXTERIOR LIGHTING SYSTEM SYMPTOMS
EXL-361
< SYMPTOM DIAGNOSIS >
[HALOGEN HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
SYMPTOM DIAGNOSIS
EXTERIOR LIGHTING SYSTEM SYMPTOMS
Symptom Table
INFOID:0000000010789882
NOTE:
Perform the self-diagnosis with CONSULT before the symptom diagnosis. Perform the trouble diagnosis if any
DTC is detected.
Symptom
Possible cause
Inspection item
Headlamp (HI) is not turned
ON
One side
• Headlamp (HI) power supply/
ground circuit
• Headlamp (HI) bulb
• Headlamp (HI) harness
• IPDM E/R
Headlamp (HI) circuit
Refer to
Both sides
Symptom diagnosis
“BOTH SIDE HEADLAMPS (HI) ARE NOT TURNED ON”
Refer to
EXL-365, "Diagnosis Procedure"
High beam indicator lamp is not turned ON
[Headlamp (HI) is turned ON]
Combination meter
Combination meter
Data monitor “HI-BEAM IND”
Headlamp (LO) is not
turned ON
One side
• Headlamp (LO) power supply/
ground circuit
• Headlamp (LO) bulb
• Headlamp (LO) harness
• IPDM E/R
Headlamp (LO) circuit
Refer to
Both sides
Symptom diagnosis
“BOTH SIDE HEADLAMPS (LO) ARE NOT TURNED ON”
Refer to
EXL-366, "Diagnosis Procedure"
Dipped beam indicator lamp is not turned ON
[Headlamp (LO) is turned ON]
Combination meter
Combination meter
Data monitor “DIPPED BEAM IND”
Each lamp is not turned ON/OFF with lighting switch
AUTO
• Combination switch input/output
signal circuit
• Combination switch
• BCM
Combination switch
Refer to
.
• Light & rain sensor power supply/
ground/signal circuit
• Light & rain sensor
• BCM
Parking lamp is not turned ON
• Parking lamp power supply/
ground circuit
• Front combination lamp internal
circuit
- LED (Parking lamp)
- Control circuit
- Harness
• IPDM E/R
Tail lamp is not turned ON
• Tail lamp power supply/ground
circuit
• Tail lamp bulb
• Tail lamp bulb socket/harness
• IPDM E/R
License plate lamp is not turned ON
• License plate lamp power supply/
ground circuit
• License plate lamp bulb
• License plate lamp bulb socket
License plate lamp circuit
Refer to
Parking lamp, license plate lamp and tail lamp are not
turned ON
Symptom diagnosis
“PARKING, LICENSE PLATE AND TAIL LAMPS ARE NOT TURNED ON”
Refer to
EXL-362
< SYMPTOM DIAGNOSIS >
[HALOGEN HEADLAMP]
EXTERIOR LIGHTING SYSTEM SYMPTOMS
Position lamp indicator is not turned ON
(Parking lamp, license plate lamp and tail lamp are
turned ON)
Combination meter
Combination meter
Data monitor “LIGHT IND”
Daytime running light is not turned ON
• Daytime running light power sup-
ply/ground circuit
• Front combination lamp internal
circuit
- LED (Daytime running light)
- Control circuit
- Harness
• IPDM E/R
Daytime running light circuit
Refer to
Turn signal lamp does not
blink
Indicator lamp is normal
(All of turn signal lamp is
not blinks)
• Fuse
• BCM power supply (turn signal
lamp) circuit
• BCM
Turn signal lamp circuit
Refer to
Indicator lamp is normal
(Applicable side per-
forms high flasher activa-
tion)
• Front turn signal lamp
- Front turn signal lamp power sup-
ply/ground circuit
- Front turn signal lamp bulb
- Front turn signal lamp bulb socket
- BCM
• Side turn signal lamp
- Side turn signal lamp power sup-
ply/ground circuit
- Side turn signal lamp
- BCM
• Rear turn signal lamp
- Rear turn signal lamp power sup-
ply/ground circuit
- Rear turn signal lamp bulb
- Rear turn signal lamp bulb socket/
harness
- BCM
Indicator lamp is included
• Combination switch input/output
signal circuit
• Combination switch
• BCM
Combination switch
Refer to
.
Turn signal indicator lamp
does not blink
(Turn signal lamp is normal)
One side
Combination meter
—
Both sides
(Always)
• Turn indicator signal
• BCM
• Combination meter
Combination meter
Data monitor “TURN IND”
Both sides
(Only when activating
hazard warning lamp
with ignition switch OFF)
• Combination meter power supply/
ground circuit
• Combination meter
Combination meter
Power supply and ground circuit
Refer to
• Hazard warning lamp does not activate
(Turn signal is normal)
• Hazard warning lamp continues activating
• Hazard switch signal/ground cir-
cuit
• Hazard switch
• BCM
Hazard switch
Refer to
Symptom
Possible cause
Inspection item
EXTERIOR LIGHTING SYSTEM SYMPTOMS
EXL-363
< SYMPTOM DIAGNOSIS >
[HALOGEN HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
Stop lamp and high-mount-
ed stop lamp are not turned
ON
All of stop lamp and high-
mounted stop lamp are
not turned ON
• Fuse
• BCM power supply (stop lamp)
circuit
• Stop lamp switch power supply/
signal circuit
• Stop lamp switch
• BCM
Any of stop lamp and
high-mounted stop lamp
are not turned ON
• Stop lamp
- Stop lamp power supply/ground
circuit
- Stop lamp bulb
- Stop lamp bulb socket/harness
- BCM
• High-mounted stop lamp
- High-mounted stop lamp power
supply/ground circuit
- High-mounted stop lamp
- BCM
Front fog lamp is not turned
ON
One side
• Front fog lamp power supply/
ground circuit
• Front fog lamp bulb
• IPDM E/R
Front fog lamp circuit
Refer to
Both sides
Symptom diagnosis
“BOTH SIDE FRONT FOG LAMPS ARE NOT TURNED ON”
Refer to
EXL-368, "Diagnosis Procedure"
Front fog lamp indicator lamp is not turned ON
(Front fog lamp is turned ON)
Combination meter
• Combination meter
Data monitor “FR FOG IND”
• BCM (HEAD LAMP)
Active test “FR FOG LAMP”
Rear fog lamp is not turned
ON
Rear fog lamp indicator
lamp is normal
• Rear fog lamp power supply/
ground circuit
• Rear fog lamp bulb
• Rear fog lamp bulb socket
• BCM
Rear fog lamp circuit
Refer to
Rear fog lamp indicator
lamp is included
• Combination switch input/output
signal circuit
• Combination switch
• BCM
Combination switch
Refer to
.
Rear fog lamp indicator lamp is not turned ON
(Rear fog lamp is turned ON)
• Rear fog lamp status signal
• BCM
• Combination meter
• Combination meter
Data monitor “RR FOG IND”
• BCM (HEAD LAMP)
Active test “RR FOG LAMP”
Symptom
Possible cause
Inspection item
EXL-364
< SYMPTOM DIAGNOSIS >
[HALOGEN HEADLAMP]
NORMAL OPERATING CONDITION
NORMAL OPERATING CONDITION
Description
INFOID:0000000010789883
AUTO LIGHT SYSTEM
The headlamp may not be turned ON/OFF immediately after passing dark area or bright area (short tunnel,
sky bridge, shadowed area etc.) while using the auto light system. This causes for the control difference. This
is normal.
HIGH BEAM ASSIST SYSTEM
When driving while using the high beam assist system, the headlamp beam may not switch or the beam
switching timing may vary according to the ambient environment (the condition of the vehicle ahead, the con-
dition of the road, the position of the vehicle, etc.).This is due to control differences and is not a malfunction.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст