Nissan X-Trail 32. Manual — part 432
SYSTEM (AUTOMATIC BACK DOOR SYSTEM)
DLK-69
< SYSTEM DESCRIPTION >
[TYPE 1]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
BACK DOOR AUTO CLOSURE FUNCTION
Open Function
When back door opener switch is pressed and automatic back door main switch in the OFF position, BCM
transmits the back door open request signal to automatic back door control unit via CAN communication, and
automatic back door control unit opens back door lock assembly.
Timing Chart (Open function)
Closure Function
When the back door is closed to the half-latch position, the motor drives to rotate the latch lever and pulls it in
from half latched to fully latched and automatically closes the door. Then, the closure motor reverses to the
neutral position.
Timing Chart (Closure Function)
ANTI-PINCH FUNCTION
C
Pi------••••••
The conditions are not satisfied in the fully
open position or during the operation, and
then the operation continues
Back door fully closed or vehi-
cle is stopped
D
• Calibration of automatic back door posi-
tion information is complete
• Back door open position setting proce-
dure is complete
2.5 sec
Pattern
Description
Time
JMKIA6517ZZ
JMKIB3494GB
JMKIB3495GB
DLK-70
< SYSTEM DESCRIPTION >
[TYPE 1]
SYSTEM (AUTOMATIC BACK DOOR SYSTEM)
During auto open operation, if an object is detected by encoder pulse in the door's path, a warning chime
sounds and the back door operates in the reverse direction to prevent pinching.
During auto close operation, if an object is detected by the touch sensors and encoder pulse in the door's
path, a warning chime sounds and the back door operates in the open direction until it is fully open.
Operation Condition
Detection method
Encoder pulse
Touch sensor
Applicable operation
Open/close operation
Close operation
Operation when
any trapped for-
eign material is de-
tected
Stop the vehicle
Buzzer sounds (pattern A)
and reverse operation
• Buzzer sounds (pattern A) and the back door stops in
the fully-open position after reverse operation
• During closure (close) operation (at main switch OFF):
Closure [open (neutral position return)] operation
Running the ve-
hicle
No reverse operation (buzzer
sounds, pattern C)
• The back door reverses a certain amount, and then it
reverses automatically to perform the auto close oper-
ation
• During closure (close) operation (at main switch ON):
Closure (open) operation
Non-reverse area
• Just after starting the mo-
tor operation
• Full range of closure oper-
ation
• Driving
• Back door open operation
• Closure [open (return the latch to the neutral position)]
Switch operation during reverse op-
eration
Receive
Number of allowable reverse opera-
tions
Perform the automatic open/close temporary stop function after 2 reverse operations re-
gardless of the operation direction
SYSTEM (AUTOMATIC BACK DOOR SYSTEM)
DLK-71
< SYSTEM DESCRIPTION >
[TYPE 1]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Circuit Diagram
INFOID:0000000010708055
JMKIB3730GB
DLK-72
< SYSTEM DESCRIPTION >
[TYPE 1]
SYSTEM (AUTOMATIC BACK DOOR SYSTEM)
JMKIB3725GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст