Nissan X-Trail 32. Manual — part 1783
SYSTEM
SBC-7
< SYSTEM DESCRIPTION >
C
D
E
F
G
I
J
K
L
M
A
B
SBC
N
O
P
SYSTEM
SEAT BELT WARNING LAMP CONTROL SYSTEM
SEAT BELT WARNING LAMP CONTROL SYSTEM : System Description
INFOID:0000000010926547
SYSTEM DIAGRAM
SEAT BELT WARNING LAMP OPERATION
Seat belt warning lamp on combination meter turns ON during a period when ignition switch is turns ON until
front seat belts are fastened. Seat belt warning lamp turns OFF when front seat belt is fastened. Seat belt
warning lamp turns ON again when front seat belt is unfastened. Refer to
CATOR LAMPS : Seat Belt Warning Lamp"
REAR SEAT BELT WARNING LAMP OPERATION
Seat belt warning is displayed on information display for approximately 35 seconds when the following condi-
tions.
• Turn ignition switch is ON.
• Rear seat belt buckle switch is turned ON (rear seat belt is not fastened).
Seat belt warning is canceled when the following conditions.
• Ignition switch is turned OFF (rear seat belt is fastened).
• Approximately 35 seconds are passed since rear seat belt warning is displayed.
SEAT BELT WARNING CHIME OPERATION
Front
Front seat belt warning chime sounds for approximately 90 seconds when the vehicle speed is approximately
15 km/h (9.3 MPH) or more while front seat belts are not fastened. Front seat belt warning chime stops when
front seat belt is fastened.
JMHIA2935GB
SBC-8
< SYSTEM DESCRIPTION >
SYSTEM
SEAT BELT WARNING LAMP CONTROL SYSTEM : Circuit Diagram
INFOID:0000000010926548
INFORMATION DISPLAY (COMBINATION METER)
INFORMATION DISPLAY (COMBINATION METER) : Rear Seat Belt Warning
INFOID:0000000010926549
DESIGN/PURPOSE
Rear seat belt warning warns the driver that rear seat belt is not fastened.
JMHIA2948GB
SYSTEM
SBC-9
< SYSTEM DESCRIPTION >
C
D
E
F
G
I
J
K
L
M
A
B
SBC
N
O
P
SYNCHRONIZATION WITH MASTER WARNING LAMP
No applicable
SYSTEM DIAGRAM
SIGNAL PATH
• When combination meter detects ignition switch ON, rear seat belt warning displays.
• When combination meter judges according to received rear seat belt buckle switch signal that a rear seat
belt is not fastened.
WARNING OPERATION CONDITION
When all of the following conditions are satisfied.
• Ignition switch is ON
• Rear seat belt buckle switch: OFF
→
ON (rear seat belt fastened
→
not fastened)
WARNING CANCEL CONDITION
When any of the following conditions are satisfied.
• Ignition switch: ON
→
OFF
• Approximately 35 seconds are passed since warning start.
WARNING/INDICATOR/CHIME LIST
WARNING/INDICATOR/CHIME LIST : Warning Lamp/Indicator Lamp
INFOID:0000000010926550
Symbol
Message
–
JMKIB3746ZZ
JMHIA2969GB
Item
Reference
Seat belt warning lamp
MWI-10, "METER SYSTEM : Design"
.
For function, refer to
MWI-54, "WARNING LAMPS/INDICATOR LAMPS : Seat Belt Warning Lamp"
SBC-10
< SYSTEM DESCRIPTION >
SYSTEM
WARNING/INDICATOR/CHIME LIST : Warning Chime
INFOID:0000000010926551
Rear seat belt warning
SBC-8, "INFORMATION DISPLAY (COMBINATION METER) : Rear Seat Belt
.
For function, refer to
SBC-7, "SEAT BELT WARNING LAMP CONTROL SYSTEM : System Descrip-
.
Item
Reference
Item
Reference
Seat belt warning
Refer to
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст