Nissan X-Trail 32. Manual — part 2075
TM-258
< SYSTEM DESCRIPTION >
[CVT: RE0F10D]
SYSTEM
CVT CONTROL SYSTEM : Circuit Diagram
INFOID:0000000010622452
CVT CONTROL SYSTEM : Fail-safe
INFOID:0000000010622453
TCM has a fail-safe mode. The mode functions so that operation can be continued even if the signal circuit of
the main electronically controlled input/output parts is damaged.
If the vehicle shows following behaviors including “poor acceleration”, a malfunction of the applicable system
is detected by TCM and the vehicle may be in a fail-safe mode. At this time, check the DTC code and perform
inspection and repair according to the malfunction diagnosis procedures.
JSDIA6447GB
SYSTEM
TM-259
< SYSTEM DESCRIPTION >
[CVT: RE0F10D]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
Fail-safe function
DTC
Vehicle behavior
Conditions of vehicle
P062F
Not changed from normal driving
—
P0705
• Shift position indicator on combination meter is not dis-
played
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0706
• Shift position indicator on combination meter is not dis-
played
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0712
• Start is slow
• Acceleration is slow
Engine coolant temperature when engine start:
Temp.
≥
10
°
C (50
°
F)
• Selector shock is large
• Start is slow
• Acceleration is slow
Engine coolant temperature when engine start:
−
35
°
C (
−
31
°
F)
≤
Temp. < 10
°
C (50
°
F)
• Selector shock is large
• Start is slow
• Acceleration is slow
Engine coolant temperature when engine star:
Temp. <
−
35
°
C (
−
31
°
F)
P0713
• Start is slow
• Acceleration is slow
Engine coolant temperature when engine start:
Temp.
≥
10
°
C (50
°
F)
• Selector shock is large
• Start is slow
• Acceleration is slow
Engine coolant temperature when engine start:
−
35
°
C (
−
31
°
F)
≤
Temp. < 10
°
C (50
°
F)
• Selector shock is large
• Start is slow
• Acceleration is slow
Engine coolant temperature when engine star:
Temp. <
−
35
°
C (
−
31
°
F)
P0715
• Start is slow
• Acceleration is slow
• Lock-up is not performed
• Manual mode is not activated
—
P0717
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0740
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0743
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0744
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0746
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
TM-260
< SYSTEM DESCRIPTION >
[CVT: RE0F10D]
SYSTEM
P0776
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
• Vehicle speed is not increased
When a malfunction occurs on the low oil pressure side
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
When a malfunction occurs on the high oil pressure side
P0778
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0779
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0826
Manual mode is not activated
—
P0841
Not changed from normal driving
—
P0847
Not changed from normal driving
—
P0848
Not changed from normal driving
—
P084C
Not changed from normal driving
—
P084D
Not changed from normal driving
—
P0863
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0890
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
• Vehicle speed is not increased
—
P0962
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0963
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0965
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
When a malfunction occurs on the low oil pressure side
• Selector shock is large
• Lock-up is not performed
When a malfunction occurs on the high oil pressure side
P0966
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0967
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
DTC
Vehicle behavior
Conditions of vehicle
SYSTEM
TM-261
< SYSTEM DESCRIPTION >
[CVT: RE0F10D]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
CVT CONTROL SYSTEM : Protection Control
INFOID:0000000010622454
The TCM becomes the protection control status temporarily to protect the safety when the safety of TCM and
transmission is lost. It automatically returns to the normal status if the safety is secured.
The TCM has the following protection control.
CONTROL FOR WHEEL SPIN
TORQUE IS REDUCED WHEN DRIVING WITH THE REVERSE GEAR
CONTROL WHEN FLUID TEMPERATURE IS HIGH
P2765
• Start is slow
• Acceleration is slow
• Lock-up is not performed
• Manual mode is not activated
—
P2813
• Selector shock is large
• Start is slow
• Acceleration is slow
• Vehicle speed is not increased
When a malfunction occurs on the low oil pressure side
• Selector shock is large
When a malfunction occurs on the high oil pressure side
P2814
Selector shock is large
—
P2815
Selector shock is large
—
U0073
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
U0100
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
U0102
Not changed from normal driving
—
U0140
Not changed from normal driving
—
U0141
Not changed from normal driving
—
U0155
Not changed from normal driving
—
U0300
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
U1000
Not changed from normal driving
—
U110F
Not changed from normal driving
—
U1111
Not changed from normal driving
—
U1117
Not changed from normal driving
—
DTC
Vehicle behavior
Conditions of vehicle
Control
When a wheel spin is detected, the engine output and gear ratio are limited and the line pressure is increased.
Limits engine output when a wheel spin occurs in any of right and left drive wheels.
Vehicle behavior in
control
If the accelerator is kept depressing during wheel spin, the engine revolution and vehicle speed are limited to
a certain degree.
Normal return condi-
tion
Wheel spin convergence returns the control to the normal control.
Control
Engine output is controlled according to a vehicle speed while reversing the vehicle.
Vehicle behavior in
control
Power performance may be lowered while reversing the vehicle.
Normal return condi-
tion
Torque returns to normal by positioning the selector lever in a range other than “R” position.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст