Nissan X-Trail 32. Manual — part 2225
PREPARATION
WW-7
< PREPARATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
PREPARATION
PREPARATION
Commercial Service Tool
INFOID:0000000010785405
Tool name
Description
Washer nozzle adjuster
Adjusting washer nozzle.
(Available in SEC. 289 of PARTS CATALOG: Part
No. 28949 1EA0A)
NOTE:
Washer nozzle adjuster is included with shipment
of nozzle.
JSLIA0149ZZ
WW-8
< SYSTEM DESCRIPTION >
COMPONENT PARTS
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location
INFOID:0000000010785406
LHD MODELS
Front right side of engine room area
Washer tank
Instrument lower panel LH
: Vehicle front
JMLIA5539ZZ
COMPONENT PARTS
WW-9
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
*
1
: For models with light & rain sensor
*
2
: For M/T models
*
3
: Except for M/T models
*
4
: For models with headlamp washer
*
5
: For models with headlamp washer switch
RHD MODELS
No.
Component
Function
Light & rain sensor*
1
.
IPDM E/R
• Controls integrated relays according to the request (via CAN communication) from BCM.
• Transmits reverse switch signal to BCM via CAN communication*
2
.
PCS-5, "Component Parts Location"
for detailed installation location.
Front wiper motor
Refer to
BCM
• BCM receives shift position signal from TCM via CAN communication*
3
.
• Judges each switch status by the combination switch reading function.
• Requests (via CAN communication) the front wiper relay, the front wiper HI/LO relay ON and
the headlamp washer relay*
4
to IPDM E/R.
• Supplies power to the rear wiper motor.
• Performs the auto stop control of the rear wiper.
• Refer to
BCS-6, "BODY CONTROL SYSTEM : Component Parts Location"
for detailed instal-
lation location.
Combination meter
Transmits vehicle speed signal to BCM via CAN communication.
Combination switch
(Wiper & washer switch)
• Combination switch: Transmits the status of the combination switch (wiper and washer) to BCM.
• Washer switch: Refer to
.
Rear wiper motor
Refer to
.
Headlamp washer relay*
4
Headlamp washer relay is controlled by IPDM E/R and supplies power to headlamp washer pump.
Washer pump
Refer to
.
Headlamp washer pump*
4
Headlamp washer switch*
5
WW-10
< SYSTEM DESCRIPTION >
COMPONENT PARTS
Washer tank
JMLIA5378ZZ
No.
Component
Function
Light & rain sensor*
1
Refer to
Combination switch
(Wiper & washer switch)
• Combination switch: Transmits the status of the combination switch (wiper and washer) to BCM.
• Washer switch: Refer to
Combination meter
Transmits vehicle speed signal to BCM via CAN communication.
Front wiper motor
Refer to
.
IPDM E/R
• Controls integrated relays according to the request (via CAN communication) from BCM.
• Transmits reverse switch signal to BCM via CAN communication*
2
.
Refer to
PCS-5, "Component Parts Location"
for detailed installation location.
BCM
• BCM receives shift position signal from TCM via CAN communication*
3
.
• Judges each switch status by the combination switch reading function.
• Requests (via CAN communication) the front wiper relay and the front wiper HI/LO relay ON to
IPDM E/R.
• Supplies power to the rear wiper motor.
• Performs the auto stop control of the rear wiper.
• Refer to
BCS-6, "BODY CONTROL SYSTEM : Component Parts Location"
for detailed instal-
lation location.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст