Nissan X-Trail 32. Manual — part 1616
MWI-146
< SYMPTOM DIAGNOSIS >
THE STEERING SWITCHES ARE INOPERATIVE
THE STEERING SWITCHES ARE INOPERATIVE
Description
INFOID:0000000010715034
If any of the following malfunctions is found for the steering switch operation.
• All switches are inoperative
• The specified switch cannot be operated
Diagnosis Procedure
INFOID:0000000010715035
1.
CHECK STEERING SWITCH SIGNAL A CIRCUIT
Check the steering switch signal A circuit. Refer to
MWI-130, "Diagnosis Procedure"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace malfunctioning parts.
2.
CHECK STEERING SWITCH SIGNAL B CIRCUIT
Check the steering switch signal B circuit. Refer to
MWI-132, "Diagnosis Procedure"
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-151, "Removal and Installation"
NO
>> Repair or replace malfunctioning parts.
MWI
THE METER CONTROL SWITCH IS INOPERATIVE
MWI-147
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
THE METER CONTROL SWITCH IS INOPERATIVE
Description
INFOID:0000000010715036
If any of the following malfunctions is found for the meter control switch operation.
• All switches are inoperative
• The specified switch cannot be operated
Diagnosis Procedure
INFOID:0000000010715037
1.
CHECK METER CONTROL SWITCH SIGNAL CIRCUIT
Check the meter control switch signal circuit. Refer to
MWI-134, "Diagnosis Procedure"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair harness or connector.
2.
CHECK METER CONTROL SWITCH
Perform a unit check for the meter control switch. Refer to
MWI-135, "Component Inspection"
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-151, "Removal and Installation"
NG
>> Replace meter control switch. Refer to
MWI-148
< SYMPTOM DIAGNOSIS >
THE DOOR OPEN WARNING CONTINUES DISPLAYING, OR DOES NOT DIS-
PLAY
THE DOOR OPEN WARNING CONTINUES DISPLAYING, OR DOES NOT
DISPLAY
Description
INFOID:0000000010715038
• The door ajar warning is displayed even though all of the doors are closed.
• The door ajar warning is not displayed even though a door is ajar.
Diagnosis Procedure
INFOID:0000000010715039
1.
CHECK DOOR SWITCH CIRCUIT
Connect CONSULT and check the BCM input signals. Refer to
DLK-186, "Component Function Check"
(TYPE1),
DLK-495, "Component Function Check"
(TYPE2),
DLK-695, "Component Function Check"
(TYPE3), or
DLK-842, "Component Function Check"
(TYPE4).
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace malfunctioning parts.
2.
CHECK COMBINATION METER INPUT SIGNAL
Select the “Data Monitor” for the “METER/M&A” and check the “DOOR W/L” monitor value.
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-151, "Removal and Installation"
NO
>> Replace BCM. Refer to
BCS-121, "Removal and Installation"
.
“DOOR W/L”
Door open
: On
Door closed
: Off
MWI
THE AMBIENT TEMPERATURE DISPLAY IS INCORRECT
MWI-149
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
THE AMBIENT TEMPERATURE DISPLAY IS INCORRECT
Description
INFOID:0000000010715040
• The displayed ambient air temperature is higher than the actual temperature.
• The displayed ambient air temperature is lower than the actual temperature.
Diagnosis Procedure
INFOID:0000000010715041
NOTE:
Check that the symptom is not applicable to the normal operating condition before starting diagnosis. Refer to
MWI-150, "INFORMATION DISPLAY : Description"
1.
CHECK AMBIENT SENSOR SIGNAL CIRCUIT
Check the ambient sensor signal circuit. Refer to
MWI-142, "Diagnosis Procedure"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace malfunctioning parts.
2.
CHECK COMBINATION METER INPUT SIGNAL
Select the “Data Monitor” for the “METER/M&A” and check the “OUTSIDE TEMP” monitor value.
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-151, "Removal and Installation"
NO
>> Replace ambient sensor. Refer to
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст