Nissan X-Trail 32. Manual — part 693
TRANSFER ASSEMBLY
DLN-183
< UNIT REMOVAL AND INSTALLATION >
[TRANSFER: TY30A]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
Inspection
INFOID:0000000011004057
INSPECTION AFTER INSTALLATION
When oil leaks while removing/installing transfer assembly, check oil level after the installation. Refer to
DLN-184
< UNIT DISASSEMBLY AND ASSEMBLY >
[TRANSFER: TY30A]
ADAPTER CASE
UNIT DISASSEMBLY AND ASSEMBLY
ADAPTER CASE
Exploded View
INFOID:0000000011005043
Adapter case oil seal (outer)
O-ring (outer)
Adapter case oil seal (inner)
Adapter case
O-ring (inner)
Ring gear shaft
Ring gear adjusting shim
(adapter case side)
Ring gear shaft bearing
(adapter case side)
Ring gear
Ring gear nut
Ring gear shaft bearing
(transfer case side)
Ring gear adjusting shim
(transfer case side)
Transfer case
Air breather hose
Air breather tube
Gasket
Filler plug
Drain plug
Plug
Drive pinion
Drive pinion adjusting shim
Drive pinion bearing (front side)
Collapsible spacer
Drive pinion bearing (rear side)
Drive pinion oil seal
Companion flange
Lock nut
Oil seal lip
: N·m (kg-m, ft-lb)
JSDIA0319GB
ADAPTER CASE
DLN-185
< UNIT DISASSEMBLY AND ASSEMBLY >
[TRANSFER: TY30A]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
Disassembly and Assembly
INFOID:0000000011005044
DISASSEMBLY
1.
Remove O-ring (outer)
from adapter case.
CAUTION:
• Never use a tool.
• Never damage adapter case.
2.
Remove adapter case mounting bolts (
).
3.
Lightly tap adapter case with a plastic hammer to remove
adapter case.
4.
Remove O-ring (inner) from adapter case.
CAUTION:
• Never use a tool.
• Never damage adapter case.
5.
Lightly tap the metal part of adapter case oil seal with punch
from back side of adapter case to remove adapter case oil seal.
CAUTION:
When removing oil seal, never damage adapter case by
scooping it out with a tool.
ASSEMBLY
1.
Install O-ring (inner) to adapter case.
CAUTION:
• Never reuse O-ring (inner).
• When installing O-ring (inner), never use a tool.
• Never damage adapter case.
• Apply multi-purpose grease to O-ring (inner).
2.
Install adapter case to the transfer case.
: Always replace after every disassembly.
: Apply transfer oil.
*
: Apply anti-corrosive oil.
: Apply multi-purpose grease.
: Select with proper thickness.
: Apply Genuine Liquid Gasket, Three Bond 1217 or equivalent.
JSDIA6419ZZ
SDIA3076J
JSDIA0252ZZ
DLN-186
< UNIT DISASSEMBLY AND ASSEMBLY >
[TRANSFER: TY30A]
ADAPTER CASE
3.
Apply anti-corrosive oil onto threads and seats of bolts (
), and
tighten with the specified torque.
4.
Check backlash, tooth contact, total preload and companion
flange runout. Refer to
CAUTION:
Measure the total preload without the adapter case oil seal
(outer/inner).
5.
Install adapter case oil seal (inner)
to the adapter case with
drifts.
CAUTION:
• Never reuse oil seal.
• Apply multi-purpose grease onto oil seal lips, and gear oil
onto the circumference.
• Install adapter case oil seal (inner) in the direction shown in the figure.
6.
Install adapter case oil seal (outer)
to the adapter case with
drifts so that it becomes flush with adapter case end surface.
CAUTION:
• Never reuse oil seal.
• Apply multi-purpose grease onto oil seal lips, and gear oil
onto the circumference.
• Install adapter case oil seal (outer) in the direction shown
in the figure.
7.
Install O-ring (outer) to the adapter case.
CAUTION:
• Never reuse O-ring (outer).
• When installing O-ring (outer), never use a tool.
• Never damage adapter case.
• Apply multi-purpose grease to O-ring (outer).
Inspection
INFOID:0000000011005046
INSPECTION AFTER DISASSEMBLY
Check items below. If necessary, replace them with new ones.
Case
Check the bearing mounting surface for wear, cracks and damages.
SDIA3076J
A
: Drift (SST: ST30720000)
B
: Drift (SST: ST27861000)
C
: Drift (commercial service tool)
Dimension “D”
: 0 – 1.0 mm
A
: Drift (SST: ST30720000)
B
: Drift (SST: ST27861000)
C
: Drift (commercial service tool)
JSDIA0259ZZ
JSDIA0214ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст