Nissan X-Trail 32. Manual — part 1190
COMPONENT PARTS
EXL-217
< SYSTEM DESCRIPTION >
[HALOGEN HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
Component Parts Location
INFOID:0000000010789778
LHD MODELS
Item
Type
Wattage (W)
Front combination lamp
Headlamp (Hi)
H9
65
Headlamp (Lo)
H11
55
Parking lamp/
daytime running light
LED
—
Front turn signal lamp
WY21W (Amber)
21
Front fog lamp
H11
55
Side turn signal lamp
LED
—
Rear combination lamp
Stop lamp
W21W
21
Tail lamp
W5W
5
Rear turn signal lamp
WY21W
21
Back-up lamp
W16W
16
Rear fog lamp
W21W
21
License plate lamp
W5W
5
High-mounted stop lamp
LED
—
EXL-218
< SYSTEM DESCRIPTION >
[HALOGEN HEADLAMP]
COMPONENT PARTS
Front combination lamp (back)
Brake pedal
No.
Component
Function
Light & rain sensor
Refer to
EXL-224, "Light & Rain Sensor"
.
Front camera unit*
1
• Judges the vehicle status from each signal in order to control the high beam as-
sist control.
• Refer to
DAS-10, "Component Parts Location"
for detailed installation location.
Side turn signal lamp
Refer to
EXL-216, "Exterior Lamp Appearance"
and
.
ABS actuator and electric unit (control
unit)*
2
• When the forward emergency braking operates, a request is transmitted to
BCM (CAN communication) to turn ON the stop lamp.
• Refer to
BRC-228, "Component Parts Location"
for detailed installation loca-
tion.
JMLIA5529ZZ
COMPONENT PARTS
EXL-219
< SYSTEM DESCRIPTION >
[HALOGEN HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
Front combination
lamp
Headlamp (HI)
(Halogen headlamp)
EXL-216, "Exterior Lamp Appearance"
and
.
Headlamp (LO)
(Halogen headlamp)
Parking lamp / Day-
time running light
Front turn signal
lamp
Front fog lamp*
3
EXL-216, "Exterior Lamp Appearance"
and
.
ECM
• ECM transmits engine status signal and Stop/Start status signal (with Stop/Start
system) to BCM via CAN communication.
EC-28, "ENGINE CONTROL SYSTEM : Component Parts Location"
EC-440, "Component Parts Location"
(QR25DE) or
(R9M) for detailed installation location.
IPDM E/R
• Controls the integrated smart FET, and supplies voltage to the load according
to the request from BCM via CAN communication.
PCS-5, "Component Parts Location"
for detailed installation location.
Door request switch*
4
DLK-341, "DOOR LOCK SYSTEM : Door Request Switch"
Door switch
Refer to
DLK-342, "DOOR LOCK SYSTEM : Door Switch"
(with Intelligent Key) or
(without Intelligent Key).
Rear combination
lamp (body side)
Tail lamp
EXL-216, "Exterior Lamp Appearance"
and
.
Stop lamp
Rear turn signal
lamp
Rear combination
lamp (back door
side)
Tail lamp
EXL-216, "Exterior Lamp Appearance"
and
.
License plate lamp
EXL-216, "Exterior Lamp Appearance"
and
.
Hands free sensor*
5
DLK-342, "DOOR LOCK SYSTEM : Hands Free Sensor"
.
Back door opener
switch assembly
Back door opener
switch
DLK-340, "DOOR LOCK SYSTEM : Back Door Opener Switch Assem-
(with Intelligent Key) or
DLK-795, "Back Door Opener Switch Assembly"
(without Intelligent Key).
Back door request
switch*
4
Back door lock as-
sembly
Back door switch
DLK-340, "DOOR LOCK SYSTEM : Back Door Lock Assembly"
(without
Intelligent Key) or
DLK-795, "Back Door Lock Assembly"
(without Intelligent Key).
Rear fog lamp
EXL-216, "Exterior Lamp Appearance"
and
.
High-mounted stop lamp
EXL-216, "Exterior Lamp Appearance"
and
.
Combination meter
• Turns the indicator lamp and warning (information display/buzzer) ON/OFF ac-
cording to the request from BCM via CAN communication.
• Blinks the turn signal indicator lamp and outputs the turn signal operating sound
with integrated buzzer according to the request from BCM via CAN communi-
cation.
• Combination meter transmits vehicle speed signal to BCM via CAN communi-
cation.
No.
Component
Function
EXL-220
< SYSTEM DESCRIPTION >
[HALOGEN HEADLAMP]
COMPONENT PARTS
*
1
: With high beam assist system
*
2
: With forward emergency braking
*
3
: With front fog lamp
*
4
: With Intelligent Key
*
5
: With hands free sensor
*
6
: Without Intelligent Key
RHD MODELS
BCM
• Detects each switch condition by the combination switch reading function.
• Exterior lamp ON/OFF is judged from each signal, and then a request is trans-
mitted to IPDM E/R (CAN communication) to turn each smart FET ON/OFF.
• It also transmits a request to the combination meter (CAN communication) to
turn indicator lamp and warning (information display/buzzer) ON/OFF.
• Blinks the turn signal lamp and hazard warning lamp according to the each
switch condition.
• Requests the turn signal indicator lamp blink to the combination meter via CAN
communication.
• Requests the turn signal operating sound ON to the combination meter via CAN
communication.
• Judges the vehicle status from each signal, and illuminates the stop lamp and
high-mounted stop lamp.
• Judges the vehicle status from each signal, and illuminates the rear fog lamp.
• Refer to
BCS-6, "BODY CONTROL SYSTEM : Component Parts Location"
for
detailed installation location.
Headlamp aiming switch
Refer to
EXL-224, "Headlamp Aiming Switch"
.
Combination switch
Refer to
BCS-13, "COMBINATION SWITCH READING SYSTEM : System De-
Ignition key cylin-
der*
6
Key switch
Refer to
DLK-796, "Ignition Key Cylinder"
.
Hazard switch
Refer to
Air bag diagnosis sensor unit
• When the air bag operates, a request is transmitted to BCM (CAN communica-
tion) to blinks the hazard warning lamp.
• Refer to
SRC-6, "Component Parts Location"
for detailed installation location.
Front combination
lamp
Headlamp aiming
motor
Refer to
EXL-223, "FRONT COMBINATION LAMP : Headlamp Aiming Motor"
.
Stop lamp switch
Refer to
No.
Component
Function
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст