Nissan X-Trail 32. Manual — part 1437
AMBIENT SENSOR
HAC-223
< REMOVAL AND INSTALLATION >
[MANUAL AIR CONDITIONING]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
AMBIENT SENSOR
Removal and Installation
INFOID:0000000010939876
REMOVAL
1.
Remove front bumper fascia assembly. Refer to
EXT-15, "Removal and Installation"
.
2.
Disconnect harness connector
.
3.
Disengage fixing pawl, and then remove ambient sensor.
INSTALLATION
Install in the reverse order of removal.
: Pawl
JMIIA3393ZZ
HAC-224
< REMOVAL AND INSTALLATION >
[MANUAL AIR CONDITIONING]
INTAKE SENSOR
INTAKE SENSOR
Exploded View
INFOID:0000000010939877
.
Removal and Installation
INFOID:0000000010939878
REMOVAL
1.
Remove instrument lower cover LH. Refer to
IP-14, "Removal and Installation"
(LHD models) or
(RHD models).
2.
Remove intake sensor from A/C unit assembly.
3.
Disconnect harness connector from intake sensor.
CAUTION:
If disconnect harness connector from intake sensor, replace intake sensor with new one.
INSTALLATION
Note the following item, and then install in the order of removal.
CAUTION:
If disconnect harness connector from intake sensor, replace intake sensor with new one.
REFRIGERANT PRESSURE SENSOR
HAC-225
< REMOVAL AND INSTALLATION >
[MANUAL AIR CONDITIONING]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
REFRIGERANT PRESSURE SENSOR
Exploded View
INFOID:0000000010939879
Refer to following items..
• R9M (EXCEPT FOR RUSSIA) : Refer to
.
• MR20DD : Refer to
• QR25DE : Refer to
• R9M (FOR RUSSIA) : Refer to
Removal and Installation
INFOID:0000000010939880
REMOVAL
Refer to following items.
• R9M (EXCEPT FOR RUSSIA) : Refer to
HA-36, "REFRIGERANT PRESSURE SENSOR : Removal and
.
• MR20DD : Refer to
HA-84, "REFRIGERANT PRESSURE SENSOR : Removal and Installation"
• QR25DE : Refer to
HA-129, "REFRIGERANT PRESSURE SENSOR : Removal and Installation"
• R9M (FOR RUSSIA) : Refer to
HA-174, "REFRIGERANT PRESSURE SENSOR : Removal and Installa-
INSTALLATION
Install in the reverse order of removal.
HAC-226
< REMOVAL AND INSTALLATION >
[MANUAL AIR CONDITIONING]
PTC HEATER
PTC HEATER
Removal and Installation
INFOID:0000000010939881
REMOVAL
1.
Remove glove box coverinstrument lower cover RH (LHD models) or instrument lower cover RH (RHD
models). Refer to
IP-14, "Removal and Installation"
IP-41, "Removal and Installation"
(RHD models).
2.
Disconnect PTC heater connector.
3.
Remove fixing screws
, and then remove PTC heater from A/
C unit assembly.
INSTALLATION
Install in the reverse order of removal.
JMIIA3532ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст