Nissan X-Trail 32. Manual — part 1914
SN-112
< REMOVAL AND INSTALLATION >
[WITHOUT PARK ASSIST]
SONAR SYSTEM SWITCH
SONAR SYSTEM SWITCH
Removal and Installation
INFOID:0000000010917671
REMOVAL
1.
Remove the instrument lower panel LH (LHD models) or RH (RHD models). Refer to following.
• LHD models:
• RHD models:
2.
Remove the switch bracket mounting screw
. And than
remove the lower switch bracket
.
3.
Disengage the pawls
using a suitable tool (A). And then
remove sonar system switch
.
INSTALLATION
Install in the reverse order of removal.
JSNIA7375ZZ
JSNIA7376ZZ
SN
SONAR SENSOR
SN-113
< REMOVAL AND INSTALLATION >
[WITHOUT PARK ASSIST]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SONAR SENSOR
FRONT
FRONT : Removal and Installation
INFOID:0000000010735614
REMOVAL
1.
Remove front bumper. Refer to
EXT-15, "Removal and Installation"
2.
Push
fixing sonar sensor in the direction shown by arrow and
unhook the pawl of sonar sensor.
3.
Push sonar sensor
in the direction shown by arrow and
remove sonar sensor from bumper.
4.
Remove sonar sensor connector from sonar sensor.
5.
Remove sonar sensor finisher and sonar sensor packing from bumper.
INSTALLATION
Installation is the reverse order of removal.
CAUTION:
• Check sonar sensor packing for damage before installation.
• Check that the packing is properly installed to the sonar sensor.
• Install it so that the connector of the sensor turns to the arrow direction of the figure.
JSNIA5796ZZ
JSNIA5797ZZ
JSNIA7367ZZ
SN-114
< REMOVAL AND INSTALLATION >
[WITHOUT PARK ASSIST]
SONAR SENSOR
REAR
REAR : Removal and Installation
INFOID:0000000010735615
REMOVAL
1.
Remove sonar sensor connector from sonar sensor.
2.
Push
fixing sonar sensor in the direction shown by arrow and
unhook the pawl of sonar sensor.
3.
Push sonar sensor
in the direction shown by arrow and
remove sonar sensor from bumper.
4.
Remove sonar sensor finisher and sonar sensor packing from bumper.
INSTALLATION
Installation is the reverse order of removal.
CAUTION:
• Check sonar sensor packing for damage before installation.
• Check that the packing is properly installed to the sonar sensor.
• Install it so that the connector of the sensor turns to the arrow direction of the figure.
Corner sensor front
Center sensor front
: Connector direction
JSNIA5796ZZ
JSNIA5797ZZ
JSNIA6873ZZ
SN
SONAR SENSOR
SN-115
< REMOVAL AND INSTALLATION >
[WITHOUT PARK ASSIST]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
Corner sensor rear
Center sensor rear
: Connector direction
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст