Nissan X-Trail 32. Manual — part 577
REMOTE KEYLESS ENTRY SYSTEM
DLK-649
< SYSTEM DESCRIPTION >
[TYPE 3]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
REMOTE KEYLESS ENTRY SYSTEM
REMOTE KEYLESS ENTRY FUNCTION
REMOTE KEYLESS ENTRY FUNCTION : System Description
INFOID:0000000010708342
System Diagram
DOOR LOCK AND UNLOCK OPERATION
• When door lock and unlock button of keyfob is pressed, door lock and unlock signal transmits from keyfob to
BCM via remote keyless entry receiver.
• When BCM receives the door lock and unlock signal, it operates door lock actuator, brinks the hazard lamp
at the same time as a reminder.
OPERATION CONDITION
If the following conditions are satisfied, door lock/unlock operation is performed if the keyfob is operated.
OPERATION AREA
To ensure that the keyfob works effectively, use within 1 m (3 ft) range of each door, however the operable
range may differ according to surroundings.
ANTI-HIJACK FUNCTION
Information of super lock function with anti-hijack function.
Refer to
DLK-652, "SUPER LOCK FUNCTION : System Description"
.
REMINDER FUNCTION
When doors are locked or unlocked by keyfob button operation, BCM blinks hazard warning lamps as a
reminder.
AUTO DOOR LOCK FUNCTION
After door is unlocked by keyfob button operation and if 30 seconds or more passes without performing the fol-
lowing operation, all doors are automatically locked. However, operation check function does not activate.
JMKIB3686GB
Remote controller operation
Operation condition
Lock
• Key switch is off
• All doors are closed
Unlock
Key switch is off
Door lock operation
(With keyfob button)
Hazard warning lamp blink
Lock
Once
Unlock (all door unlock)
Twice
Unlock (anti-hijack operation)
Twice (quick)
DLK-650
< SYSTEM DESCRIPTION >
[TYPE 3]
REMOTE KEYLESS ENTRY SYSTEM
Auto door lock mode can be changed by the “AUTO LOCK SET” mode in “WORK SUPPORT”. Refer to
659, "MULTI REMOTE ENT : CONSULT Function (BCM - MULTI REMOTE ENT) (With Super Lock)"
INTERIOR ROOM LAMP CONTROL FUNCTION
Interior room lamp is controlled according to door lock/unlock state, refer to
CONTROL SYSTEM : System Description"
Operating condition
• Door switch is ON (door is open)
• Door is locked
• Key switch is ON
REMOTE KEYLESS ENTRY SYSTEM
DLK-651
< SYSTEM DESCRIPTION >
[TYPE 3]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
REMOTE KEYLESS ENTRY FUNCTION : Circuit Diagram
INFOID:0000000010708343
SUPER LOCK FUNCTION
JMKIB3732GB
DLK-652
< SYSTEM DESCRIPTION >
[TYPE 3]
REMOTE KEYLESS ENTRY SYSTEM
SUPER LOCK FUNCTION : System Description
INFOID:0000000010728213
SYSTEM DIAGRAM
• Super lock provides a higher anti-theft performance than a conventional door lock function.
• BCM controls the super lock system.
• When all doors are closed super lock system can be set/release by keyfob.
• When super lock is set, inside handle of doors do not work.
SUPER LOCK SET OPERATION (LOCK OPERATION)
When Keyfob lock button is operated while all doors are in unlock state, super lock of all doors is set, and
simultaneously, all doors are locked.
SUPER LOCK RELEASE OPERATION (UNLOCK OERATION) WITH ANTI-HIJACK MODE
When Keyfob unlock button is operated while super lock of all doors is set, super lock of all doors is released,
and simultaneously, driver door are unlocked. When Keyfob unlock button is operated again, all doors are
unlocked.
SUPER LOCK RELEASE OPERATION (UNLOCK OERATION) WITHOUT ANTI-HIJACK MODE
When keyfob unlock button is operated while super lock of all doors is set, super lock of all doors is released,
and simultaneously, all doors are unlocked.
SUPER LOCK RELEASE OPERATION (UNLOCK OERATION) CHANGE IGNITION SWITCH
Super Lock Release by Ignition Switch is Changed from OFF to ON
When the super lock is set, release super lock when the ignition switch is changed from OFF to ON.
ANTI-HIJACK FUNCTION SETTING
With CONSULT
Refer to
DLK-658, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK) (Without Intelligent Key Sys-
.
Without CONSULT
• ON/OFF can be switched when keyfob lock button and unlock button are pressed simultaneously for 4 sec-
onds or more while steering lock is locked.
• When mode is switched, hazard warning lamp blinks.
INFORMATION DISPLAY (COMBINATION METER)
INFORMATION DISPLAY (COMBINATION METER) : Door Open Warning
INFOID:0000000010708346
DESIGN/PURPOSE
Information display warns the driver that each door or trunk lid is open or is not fully closed.
JMKIB3687GB
OFF
→
ON
: 1 blinks
ON
→
OFF
: 3 blink
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст