Nissan X-Trail 32. Manual — part 79
BCS-32
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (BCM)
*: Factory setting
DATA MONITOR
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
WIPER LINK
MODE1
NOTE:
This item is displayed, but cannot be used
MODE2
MODE3
MODE4
Service item
Setting item
Setting
Monitor item
[Unit]
Description
PUSH SW
[On/Off]
Indicates [On/Off] condition of push-button ignition switch
ENGINE STATE
[STOP/STALL/CRANK/RUN]
Indicates [STOP/STALL/CRANK/RUN] condition of engine states
VEH SPEED 1
[km/h]
Indicates [km/h] condition of vehicle speed signal from combination meter
TURN SIGNAL R
[On/Off]
Each switch status that BCM judges from the combination switch reading function.
TURN SIGNAL L
[On/Off]
TAIL LAMP SW
[On/Off]
HI BEAM SW
[On/Off]
HEADLAMP SW
[On/Off]
LIGHT OFF SW
[On/Off]
PASSING SW
[On/Off]
AUTO LIGHT SW
[On/Off]
FR FOG SW
[On/Off]
RR FOG SW
[On/Off]
DOOR SW-DR
[On/Off]
Indicated [On/Off] condition of front door switch (driver side)
DOOR SW-AS
[On/Off]
Indicated [On/Off] condition of front door switch (passenger side)
DOOR SW-RR
[On/Off]
Indicated [On/Off] condition of rear door switch RH
DOOR SW-RL
[On/Off]
Indicated [On/Off] condition of rear door switch LH
DOOR SW-BK
[On/Off]
Indicated [On/Off] condition of back door switch
OPTI SEN (DTCT)
[V]
NOTE:
This item is displayed, but cannot be monitored
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-33
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
ACTIVE TEST
*: For models without navigation, this item is displayed, but cannot be tested.
HEADLAMP : CONSULT Function (BCM - HEAD LAMP) (Halogen Headlamp)
INFOID:0000000011008727
WORK SUPPORT
*: Factory setting
DATA MONITOR
OPTI SEN (FILT)
[V]
NOTE:
This item is displayed, but cannot be monitored
OPTICAL SENSOR
[On/Off/NG]
The sensor condition received from light & rain sensor
Monitor item
[Unit]
Description
Test item
Operation
Description
FR FOG LAMP
On
• Transmits the front fog light request signal to IPDM E/R via CAN communication
to turn the front fog lamp ON
• Transmits the front fog light request signal to combination meter via CAN commu-
nication to turn the front fog lamp indicator lamp ON
Off
Stops the front fog light request signal transmission
RR FOG LAMP
On
• Outputs voltage to turn the rear fog lamp ON
• Transmits the rear fog lamp status signal to combination meter via CAN commu-
nication to turn the rear fog lamp indicator lamp ON
Off
• Stops the voltage to turn the rear fog lamp OFF
• Stops the rear fog lamp status signal transmission
STOP LAMP 1
On
Outputs voltage to turn the stop lamp RH ON
Off
Stops the voltage to turn the stop lamp RH OFF
STOP LAMP 2
On
Outputs voltage to turn the stop lamp LH ON
Off
Stops the voltage to turn the stop lamp LH OFF
STOP LAMP 3
On
Outputs voltage to turn the high-mounted stop lamp ON
Off
Stops the voltage to turn the high-mounted stop lamp OFF
DAYTIME RUNNING LIGHT
On
Transmits the daytime running light request signal to IPDM E/R using CAN commu-
nication to turn the daytime running light ON
Off
Stops the daytime running light request signal transmission
ILL DIM SIGNAL*
On
Transmits the dimmer signal to NAVI control unit and dims display
Off
Stops the dimmer signal transmission
Service item
Setting item
Setting
CUSTOM A/LIGHT SETTING
MODE1*
Normal
MODE2
More sensitive setting than normal setting (Turns ON earlier than normal operation)
MODE3
More sensitive setting than MODE2 (Turns ON earlier than MODE2)
MODE4
Less sensitive setting than normal setting (Turns ON later than normal operation)
TWILIGHT On
MODE1
NOTE:
This item is displayed, but cannot be used
MODE2
WIPER LINK
MODE1
NOTE:
This item is displayed, but cannot be used
MODE2
MODE3
MODE4
BCS-34
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (BCM)
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
*
1
: For models without auto light system, this item is displayed, but cannot be monitored.
*
2
: For models without front fog lamp, this item is displayed, but cannot be monitored.
ACTIVE TEST
Monitor item
[Unit]
Description
PUSH SW
[On/Off]
Indicates [On/Off] condition of push-button ignition switch
ENGINE STATE
[STOP/STALL/CRANK/RUN]
Indicates [STOP/STALL/CRANK/RUN] condition of engine states
VEH SPEED 1
[km/h]
Indicates [km/h] condition of vehicle speed signal from combination meter
TURN SIGNAL R
[On/Off]
Each switch status that BCM judges from the combination switch reading function.
TURN SIGNAL L
[On/Off]
TAIL LAMP SW
[On/Off]
HI BEAM SW
[On/Off]
HEADLAMP SW
[On/Off]
LIGHT OFF SW
[On/Off]
PASSING SW
[On/Off]
AUTO LIGHT SW*
1
[On/Off]
FR FOG SW*
2
[On/Off]
RR FOG SW
[On/Off]
DOOR SW-DR
[On/Off]
Indicated [On/Off] condition of front door switch (driver side)
DOOR SW-AS
[On/Off]
Indicated [On/Off] condition of front door switch (passenger side)
DOOR SW-RR
[On/Off]
Indicated [On/Off] condition of rear door switch RH
DOOR SW-RL
[On/Off]
Indicated [On/Off] condition of rear door switch LH
DOOR SW-BK
[On/Off]
Indicated [On/Off] condition of back door switch
OPTI SEN (DTCT)
[V]
NOTE:
This item is displayed, but cannot be monitored
OPTI SEN (FILT)
[V]
NOTE:
This item is displayed, but cannot be monitored
OPTICAL SENSOR*
1
[On/Off/NG]
The sensor condition received from light & rain sensor
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-35
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
*
1
: For models without front fog lamp, this item is displayed, but cannot be tested.
*
2
: For models without navigation, this item is displayed, but cannot be tested.
WIPER
WIPER : CONSULT Function - WIPER
INFOID:0000000011008738
WORK SUPPORT
*
1
: For models without light & rain sensor
*
2
: For models with light & rain sensor
*
3
: Factory setting
Test item
Operation
Description
FR FOG LAMP*
1
On
• Transmits the front fog light request signal to IPDM E/R via CAN communication
to turn the front fog lamp ON
• Transmits the front fog light request signal to combination meter via CAN commu-
nication to turn the front fog lamp indicator lamp ON
Off
Stops the front fog light request signal transmission
RR FOG LAMP
On
• Outputs voltage to turn the rear fog lamp ON
• Transmits the rear fog lamp status signal to combination meter via CAN commu-
nication to turn the rear fog lamp indicator lamp ON
Off
• Stops the voltage to turn the rear fog lamp OFF
• Stops the rear fog lamp status signal transmission
STOP LAMP 1
On
Outputs voltage to turn the stop lamp RH ON
Off
Stops the voltage to turn the stop lamp RH OFF
STOP LAMP 2
On
Outputs voltage to turn the stop lamp LH ON
Off
Stops the voltage to turn the stop lamp LH OFF
STOP LAMP 3
On
Outputs voltage to turn the high-mounted stop lamp ON
Off
Stops the voltage to turn the high-mounted stop lamp OFF
DAYTIME RUNNING LIGHT
On
Transmits the daytime running light request signal to IPDM E/R using CAN commu-
nication to turn the daytime running light ON
Off
Stops the daytime running light request signal transmission
ILL DIM SIGNAL*
2
On
Transmits the dimmer signal to NAVI control unit and dims display
Off
Stops the dimmer signal transmission
Service item
Setting item
Description
WIPER SPEED SET-
TING*
1
On*
3
Linked with vehicle speed
(Front wiper intermittent time linked with the vehicle speed and
wiper volume dial position.)
The setting of front wiper
INT operation can be
changed.
Off
Not linked with vehicle speed
(Front wiper intermittent time linked with the wiper volume dial
position.)
RAIN SENSOR*
2
On*
3
Linked with light & rain sensor
(Front wiper intermittent time linked with the light & rain sensor,
vehicle speed, and wiper volume dial position)
The setting of front wiper
AUTO operation can be
changed
Off
Not linked with light & rain sensor
(Front wiper intermittent time linked with the vehicle speed and
wiper volume dial position)
FR RR DRIP
On*
3
Front wiper drop wipe and rear wiper drop wipe operation ON
The setting of drop wipe
operation can be
changed
Off
Front wiper drop wipe and rear wiper drop wipe operation OFF
REAR WIPER LINK
WITH REVERSE
SETTING
On
Rear wiper operation linked with reverse ON
The setting of rear wiper
operation linked with re-
verse can be changed
Off*
3
Rear wiper operation linked with reverse OFF
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст