Nissan X-Trail 32. Manual — part 483
FRONT FENDER
DLK-273
< REMOVAL AND INSTALLATION >
[TYPE 1]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
2.
Disengage fixing pawls according to the numerical order 1
→
3 indicated by arrows as shown in the figure,
and then remove front fender cover.
CAUTION:
When performing the procedure after removing fender cover, protect the lower of windshield glass
with urethane etc.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
Install so that there is no clearance between windshield and cowl top cover.
: Pawl
: Vehicle front
JMKIB3008ZZ
DLK-274
< REMOVAL AND INSTALLATION >
[TYPE 1]
FRONT DOOR
FRONT DOOR
Exploded View
INFOID:0000000010708263
Front door panel
Door hinge (upper)
Door hinge (lower)
Door check link
Bumper rubber
Bumper rubber
JMKIB3163GB
FRONT DOOR
DLK-275
< REMOVAL AND INSTALLATION >
[TYPE 1]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DOOR ASSEMBLY
DOOR ASSEMBLY : Removal and Installation
INFOID:0000000010708264
CAUTION:
• Perform work with 2 workers, because of its heavy weight.
• When removing and installing front door assembly, support door with a jack and shop cloth to pro-
tect door and body.
REMOVAL
1.
Remove dash side finisher. Refer to
INT-26, "DASH SIDE FINISHER : Removal and Installation"
.
2.
Remove SMJ (super multiple junction).
3.
Disconnect front door harness connectors
.
4.
Remove front door harness grommet
from vehicle body
,
and then pull out front door harness from vehicle body.
5.
Remove mounting bolt of door check link on vehicle body.
6.
Remove door hinge mounting nuts of door side, and then remove front door assembly.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Apply anticorrosive agent onto the mounting surface.
• After installation, perform the fitting adjustment. Refer to
DLK-276, "DOOR ASSEMBLY : Adjust-
• After installation, apply touch-up paint (the body color) onto the head of door hinge mounting nuts.
Door striker
TORX bolt
Grommet
Front door weather-strip
Front door weather-strip clip
: Clip
: Pawl
: Always replace after every disassembly.
: N·m (kg-m, in-lb)
: N·m (kg-m, ft-lb)
: Body grease
JMKIB3019ZZ
JMKIB3020ZZ
DLK-276
< REMOVAL AND INSTALLATION >
[TYPE 1]
FRONT DOOR
• After installation, check that door opens and closes normally. Refer to
DOOR ASSEMBLY : Inspection
INFOID:0000000010708265
1.
Open and close the door. Check that door hinge and check link rotation portion moves smoothly.
2.
Check door hinge rotating part for poor lubrication. Apply body
grease if necessary.
3.
Check door check link rotating part for poor lubrication. Apply
body grease if necessary.
DOOR ASSEMBLY : Adjustment
INFOID:0000000010708266
FITTING ADJUSTMENT
: Body grease
JMKIB0321ZZ
: Body grease
JMKIB0322ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст