Nissan X-Trail 32. Manual — part 1024
VACUUM LINES
EC-1225
< REMOVAL AND INSTALLATION >
[R9M]
C
D
E
F
G
H
I
J
K
L
M
A
EC
N
P
O
REMOVAL AND INSTALLATION
VACUUM LINES
Vacuum Layout
INFOID:0000000010935929
CAUTION:
Do not use soapy water or any type of solvent while installing vacuum hose.
TC boost control actuator
Engine coolant bypass valve control
solenoid valve
Engine coolant bypass valve control
actuator
Vacuum pump
TC boost control solenoid valve
JSBIA4746ZZ
EC-1226
< REMOVAL AND INSTALLATION >
[R9M]
ECM
ECM
Removal and Installation
INFOID:0000000010935931
CAUTION:
Perform ADDITIONAL SERVICE WHEN REPLACING ECM. Refer to
.
REMOVAL (CVT MODELS)
1.
Remove the battery. Refer to
PG-139, "R9M : Removal and Installation"
2.
Remove the air duct (inlet). Refer to
.
3.
Disconnect the TCM harness connector
and the ECM har-
ness connector
. Refer to
(lever
locking type).
4.
Remove the battery tray with ECM and TCM. Refer to
PG-143, "R9M : Removal and Installation"
5.
Remove TCM bracket with TCM. Refer to
PG-148, "EXCEPT FOR R9M : Removal and Installation"
6.
Remove ECM from the battery tray.
REMOVAL (M/T MODELS)
1.
Remove the battery. Refer to
PG-139, "R9M : Removal and Installation"
2.
Remove the air duct (inlet). Refer to
.
3.
Disconnect the ECM harness connector. Refer to
(lever locking type).
4.
Remove the battery tray with ECM. Refer to
PG-143, "R9M : Removal and Installation"
5.
Remove ECM from the battery tray.
INSTALLATION
Install in the reverse order of removal.
JSDIA5385ZZ
GLOW CONTROL UNIT
EC-1227
< REMOVAL AND INSTALLATION >
[R9M]
C
D
E
F
G
H
I
J
K
L
M
A
EC
N
P
O
GLOW CONTROL UNIT
Exploded View
INFOID:0000000010935932
Removal and Installation
INFOID:0000000010935933
REMOVAL
1.
Remove front fender protector (LH). Refer to
EXT-35, "FENDER PROTECTOR : Removal and Installa-
2.
Disconnect glow control unit harness connector.
3.
Remove glow control unit from bracket.
INSTALLATION
Install in the reverse order of removal.
Glow control unit
Bracket
: N·m (kg-m, in-lb)
JSBIA5215GB
EC-1228
< REMOVAL AND INSTALLATION >
[R9M]
THERMOPLUNGER CONTROL UNIT
THERMOPLUNGER CONTROL UNIT
Exploded View
INFOID:0000000010935934
Removal and Installation
INFOID:0000000010935935
REMOVAL
1.
Remove front fender protector (LH). Refer to
EXT-35, "FENDER PROTECTOR : Removal and Installa-
2.
Disconnect thermoplunger control unit harness connector.
3.
Remove thermoplunger control unit from bracket.
INSTALLATION
Install in the reverse order of removal.
Thermoplunger control unit
Bracket
: N·m (kg-m, in-lb)
JSBIA5453GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст