Nissan X-Trail 32. Manual — part 1596
MWI-66
< SYSTEM DESCRIPTION >
SYSTEM
*1: Gasoline engine models
*2: Diesel engine models
SYNCHRONIZATION WITH MASTER WARNING LAMP
Not applicable
SYSTEM DIAGRAM
SIGNAL PATH
Combination meter will show the interrupt maintenance items according to vehicle speed signal via CAN com-
munication.
For information on setting maintenance items, refer to
MWI-71, "INFORMATION DISPLAY : System Descrip-
.
WARNING/INDICATOR OPERATING CONDITION
When all of the following conditions are satisfied:
• Ignition switch ON
• When mileage exceeds a set value
WARNING/INDICATOR CANCEL CONDITION
Press the ENTER switch
Tire
Other
Symbol
Message
JSNIA5885ZZ
JSNIA5886ZZ
JSNIA5887GB
MWI
SYSTEM
MWI-67
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
TIMING CHART
WARNING/INDICATOR (ON INFORMATION DISPLAY) : Oil Level Warning
INFOID:0000000010789960
DESIGN/PURPOSE
The oil level indicator judges and displays engine oil level. When engine oil level is insufficient, the oil level
indicator shows an engine oil level low warning to the driver. When oil level sensor is in abnormal conditions,
an oil level sensor warning is displayed.
Oil Level Low Warning
Oil Level Sensor Warning
SYNCHRONIZATION WITH MASTER WARNING LAMP
MWI-47, "WARNING LAMPS/INDICATOR LAMPS : Master Warning Lamp"
JSNIA5888GB
Symbol
Message
Engine Oil
Oil Level Low
Symbol
Message
Engine Oil
Sensor Error
Visit Dealer
JSNIA7300ZZ
JPNIA1881ZZ
MWI-68
< SYSTEM DESCRIPTION >
SYSTEM
SYSTEM DIAGRAM
SIGNAL PATH
• BCM transmits a door switch signal to the combination meter via CAN communication.
• Oil level sensor transmits an oil level sensor signal to the combination meter.
• Combination meter displays engine oil level to the information display.
• Check engine oil level when the following condition is satisfied:
- A lapse of approximately 5 minutes after turning OFF the ignition switch
- Door switch (driver side): ON (Driver's door is open)
WARNING/INDICATOR OPERATING CONDITION
Oil level low warning and oil level sensor warning are displayed under the following conditions:
Oil Level Low Warning
• Ignition switch: ON
• When engine oil level is low (After engine oil level check)
Oil Level Sensor Warning
• Ignition switch: ON
• Oil level sensor abnormality
WARNING/INDICATOR CANCEL CONDITION
Oil level low warning and oil level sensor warning are cancelled under the following conditions:
Oil Level Low Warning
Press the enter switch downward
Oil Level Sensor Warning
Press the enter switch downward
METER ILLUMINATION CONTROL
METER ILLUMINATION CONTROL : System Description
INFOID:0000000010714991
SYSTEM DIAGRAM
DESCRIPTION
Back Light Illumination Control Function
JSNIA5190GB
JSNIA7298GB
MWI
SYSTEM
MWI-69
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
The operation of the illumination control switch allows the brightness adjustment of meter illumination.
Meter Illumination Control Function
• Combination meter controls meter illumination, based on the position light request signal.
• The combination meter switches mode between Daytime mode and Nighttime mode, according to the fol-
lowing conditions.
*: For further information, refer to
INL-18, "ILLUMINATION CONTROL SYSTEM : System Description"
.
Signal Path
METER EFFECT FUNCTION
METER EFFECT FUNCTION : System Description
INFOID:0000000010714992
SYSTEM DIAGRAM
DESCRIPTION
Driver Welcome Function
Meter illumination
The number of adjustable steps
Daytime
22 step
Nighttime
22 step
Condition
Meter illumination
Combination switch
(lighting switch)
1ST or 2ND position
Nighttime mode
AUTO POSITION
Outdoor: Bright*
Daytime mode
Outdoor: Dark*
Nighttime mode
Off
Daytime mode
Signal name
Signal path
Ignition signal
—
Position light request signal
BCM
Combination
meter
Starter relay status signal
IPDM E/R
Combination meter
Engine status signal
ECM
Combination
meter
JSNIA7179GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст