Nissan Terrano r20e. Manual — part 72
Inspection and Adjustment
DISC BRAKE
Unit: mm (in)
Brake model
LD28VA
Pad wear limit
Minimum thickness
2.0 (0.079)
Rotor repair limit
Minimum thickness
24.0 (0.94)
DRUM BRAKE
Unit: mm (in)
Lining wear limit
Minimum thickness
1.52 (0.06)
Drum repair limit
Maximum inner diameter
280.5 (11.04)
Out-of-roundness
0.05 (0.0020)
or less
BRAKE PEDAL
Unit: mm (in)
RHD
LHD
Free pedal height (H)
196 - 206
(7.7 - 8.1)
210 - 220
(8.3 - 8.7)
Full stroke (D)
137.7 - 148.7
(5.42 - 5.85)
142.5 - 152.5
(5.61 - 6.0)
Clearance between pedal
stopper and threaded end of
stop lamp switch (C)
0.3 - 1.0 (0.012 - 0.039)
Pedal free play at clevis (A)
1 - 3 (0.039 - 0.118)
PARKING BRAKE
Control type
Item
Center lever
Number of notches
[under force of 196 N (20 kg, 44 lb)]
9 - 10
Number of notches
(when warning switch comes on)
1
SERVICE DATA AND SPECIFICATIONS (SDS)
BR-85
NOTES
BODY & TRIM
CONTENTS
. . . . . . . . . . . . . . . ...2
Service Notice. . . . . . . . . . . . . . . ..2
Supplemental Restraint System (SRS)
. . . ...2
. . . . . . . . . . . . . 3
Description . . . . . . . . . . . . . . . . ...3
. . . . . . .5
Checking Body Corrosion. . . . . . . . . . . 5
. . . . . . . . . . . . . . .6
Removal and Installation . . . . . . . . . . . .6
. . . . . . . . ..8
Removal and Installation . . . . . . . . . . . .8
. . . . . . . . . . . . . . . . . . . .10
Removal and Installation . . . . . . . . . . ...10
. . . . . . . ..16
Removal and Installation . . . . . . . . . . ...16
. . . . . . . . . . . ..18
Removal and Installation . . . . . . . . . . ...18
. . . . . . . . . . . . . . . . ...19
Removal and Installation . . . . . . . . . . ...19
. . . . . . . . . . . . . . . . ...20
Removal and Installation . . . . . . . . . . ...20
. . . . . . . . . . . . . . . . . .21
Removal and Installation . . . . . . . . . . ...21
. . . . . . . . . . . . . . . . .34
Removal and Installation . . . . . . . . . . ...34
Heated Seat. . . . . . . . . . . . . . . ...36
Active Head Restraint. . . . . . . . . . . . 36
. . . . . . . . . . . . . . . ..37
Removal and Installation . . . . . . . . . . ...37
. . . . . . . . . . . . . . . . ..39
Removal and Installation . . . . . . . . . . ...39
. . . . . . . . . . . . . . . . . ..40
Removal and Installation . . . . . . . . . . ...40
. . . . . . . . . 42
Removal and Installation . . . . . . . . . . ...42
. . . . . . . . . . . . . . . .48
Removal and Installation . . . . . . . . . . ...48
. . . . . . . . . . . . . 49
Alignment . . . . . . . . . . . . . . . . ...49
Service Notice
I
When removing or installing various parts, place a cloth or padding onto the vehicle body to prevent
scratches.
I
Handle trim, molding, instruments, grille, etc. carefully during removing or installing. Be careful not to oil
or damage them.
I
Apply sealing compound where necessary when installing parts.
I
When applying sealing compound, be careful that the sealing compound does not protrude from parts.
I
When replacing any metal parts (for example body outer panel, members, etc.), be sure to take rust pre-
vention measures.
Supplemental Restraint System (SRS) “AIR
BAG” and “SEAT BELT PRE-TENSIONER”
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER” used along with
a seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of
collision. The SRS system composition which is available to NISSAN MODEL R20 is as follows (The compo-
sition varies according to the destination and optional equipment.):
I
For a frontal collision
The Supplemental Restraint System consists of driver air bag module (located in the center of the steer-
ing wheel), front passenger air bag module (located on the instrument panel on passenger side), front seat
belt pre-tensioners, a diagnosis sensor unit, warning lamp, wiring harness and spiral cable.
I
For a side collision
The Supplemental Restraint System consists of front side air bag module (located in the outer side of front
seat), side air bag (satellite) sensor, diagnosis sensor unit (one of components of air bags for a frontal
collision), wiring harness, warning lamp (one of components of air bags for a frontal collision).
Information necessary to service the system safely is included in the RS section of this Service Manual.
WARNING:
I
To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance should be per-
formed by an authorized NISSAN dealer.
I
Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the RS section.
I
Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. Spiral cable and wiring harnesses covered with yellow insulation tape either just
before the harness connectors or for the complete harness are related to the SRS.
PRECAUTIONS
BT-2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст