Nissan Terrano r20e. Manual — part 336
General
The R20 model as outlined in this supplement is equipped with the DDL-1 connector which is compatible with
both CONSULT and CONSULT-II. During the establishment of this supplement, the CONSULT-II has been
utilised.
Function and System Application
Diagnostic
test mode
Function
ENGINE
Air bag
ABS
NATS*1
Self-diagnostic results
Self-diagnostic results can be read and erased quickly.
x
x
x
x
ECU discriminated No.
Classification number of a replacement ECU can be
read to prevent an incorrect ECU from being installed.
—
x
—
—
Data monitor
Input/Output data in the ECM can be read.
x
—
x
—
Active test
Diagnostic Test Mode in which CONSULT-II drives
some actuators apart from the ECMs and also shifts
some parameters in a specified range.
x
—
x
—
ECM part number
ECM part number can be read.
x
—
x
—
Control unit initialisation
All registered ignition key IDs in NATS components can
be initialised and new IDs can be registered.
—
—
—
x
Self-function check
ECM checks its own NATS communication interface.
—
—
—
x
x: Applicable
*1: NATS: Nissan Anti-Theft System
SGI619
CONSULT-II CHECKING SYSTEM
GI-26
Nickel Metal Hydride Battery Replacement
CONSULT-II contains a nickel metal hydride battery. When replacing the battery obey the following:
WARNING:
Replace the nickel metal hydride battery with genuine CONSULT-II battery only. Use of another battery
may present a risk of fire or explosion. The battery may present a fire or chemical burn hazard if mis-
treated. Do not recharge, disassemble of dispose of in fire.
Keep the battery out of reach of children and discard used battery conforming to the local regulations.
Checking Equipment
When ordering this equipment, contact your NISSAN distributor.
Tool name
Description
NISSAN CONSULT-II
q
1
CONSULT-II unit and acces-
sories
q
2
Program card AED01B-1 for
diagnosis, AEN00B for NATS
YGI004
NOTE:
I
The CONSULT-II must be used in conjunction with a program card.
CONSULT-II does not require loading (Initialisation) procedure.
I
Be sure the CONSULT-II is turned off before installing or removing a program card.
CONSULT-II CHECKING SYSTEM
GI-27
Model Variation
Body
Grade
Engine
Transmission
Group A (RHD)
Group B (South)
Group C (Cen-
tral)
Group D (North)
H/T
SE
“Luxury/
Elegance”
TD27Ti
FS5R30A
KVPNRVF-UEC
KVPNLVF-UGC
KVPNLVF-USC
ZD30ETi
FS5R30A
KWSNRVF-UEC
KWSNLVF-UGC
KWSNLVF-USC
RE4R01A
KWSNRVA-UEC
KWSNLVA-UGC
KWSNLVA-USC
SR
“Sport”
TD27Ti
FS5R30A
KVPNRUF-UEC
KVPNLUF-UGC
KVPNLUF-USC
ZD30ETi
FS5R30A
KWSNRUF-UEC
KWSNLUF-UGC
KWSNLUF-USC
RE4R01A
KWSNRUA-UEC
KWSNLUA-UGC
KWSNLUA-USC
S “Comfort”
TD27Ti
FS5R30A
KVPNRQF-UEC
KVPNLQF-UGC
KVPNLQF-USC
Wagon
SE
“Luxury/
Elegance”
TD27Ti
FS5R30A
TVPURVF-UEC
TVPULVF-UGC
TVPULVF-USC
ZD30ETi
FS5R30A
TWSURVF-UEC
TWSULVF-UGC
TWSULVF-USC
RE4R01A
TWSURVA-UEC
TWSULVA-UGC
TWSULVA-USC
SR
“Sport”
TD27Ti
FS5R30A
TVPURUF-UEC
TVPULUF-UGC
TVPULUF-USC
ZD30ETi
FS5R30A
TWSURUF-UEC
TWSULUF-UGC
TWSULUF-USC
RE4R01A
TWSURUA-UEC
TWSULUA-UGC
TWSULUA-USC
S “Comfort”
TD27Ti
FS5R30A
TVPURQF-UEC
TVPULQF-UGC
TVPULQF-USC
Prefix and suffix designations:
K
BF
N
L
V
F
R20
E
G
C
C : Standard
E : RHD models
G : South/Central Europe
S : North Europe
U : Turbo
F : 5-speed manual transmission
A : Automatic transmission
Q : S grade
U : SR grade
V : SE grade
L : Left-hand drive
R : Right-hand drive
N : 4-wheel drive, short wheelbase
U : 4-wheel drive, long wheelbase
VP : TD27Ti engine
WS : ZD30DDTi engine
K : Hardtop
T : Wagon
IDENTIFICATION INFORMATION
GI-28
Identification Number
VEHICLE IDENTIFICATION NUMBER (Chassis number)
Prefix and suffix designations:
VSK
K
B
N
R20
U
O
XXXXXX
Vehicle serial number
Stopgap (no meaning)
U : Europe
Model
Axle
N : 4-wheel drive, short wheelbase
U : 4-wheel drive, long wheelbase
Engine
V : TD27Ti
X : ZD30DDTi
Body
K : Hardtop
T : Wagon
Manufacturer code
EGI013
IDENTIFICATION INFORMATION
GI-29
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст