Nissan Terrano r20e. Manual — part 89
NCL028
CLUTCH MASTER CYLINDER
CL-7
Clutch Master Cylinder
INSPECTION
I
Check cylinder and piston rubbing surface for uneven wear,
rust or damage. Replace if necessary.
I
Check piston and piston cup for wear or damage. Replace if
necessary.
I
Check return spring for wear or damage. Replace if necessary.
I
Check reservoir for deformation or damage. Replace if neces-
sary.
I
Check dust cover for cracks, deformation or damage. Replace
if necessary.
Clutch Operating Cylinder
INSPECTION
I
Check rubbing surface of cylinder for wear, rust or damage.
Replace if necessary.
I
Check piston and piston cup for wear or damage. Replace if
necessary.
I
Check piston spring for wear or damage. Replace if necessary.
I
Check dust cover for cracks, deformation or damage. Replace
if necessary.
SCL420
HYDRAULIC CLUTCH CONTROL
CL-8
REMOVAL AND INSTALLATION
I
Install retainer spring and holder spring.
I
Remove release bearing.
I
Install release bearing with suitable drift.
NCL017
SCL217
CL145
SCL222
CLUTCH RELEASE MECHANISM
CL-9
INSPECTION
I
Check release bearing to see that it rolls freely and is free from
noise, cracks, pitting or wear. Replace if necessary.
I
Check release sleeve and withdrawal lever rubbing surface for
wear, rust or damage. Replace if necessary.
LUBRICATION
I
Apply recommended grease to contact surface and rubbing
surface.
Too much lubricant might cause clutch disc facing damage.
DUST COVER SEALING
I
Apply recommended sealant to contact surface of dust cover to
transmission case and withdrawal lever and then install dust
cover clip.
NCL026
ECL006
CLUTCH RELEASE MECHANISM
CL-10
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст