Nissan Terrano r20e. Manual — part 124
Wiring Diagram
YEC183A
DTC 0403 ACCEL POS SENSOR
ZD30DDTi
EC-133
YEC184A
DTC 0403 ACCEL POS SENSOR
ZD30DDTi
Wiring Diagram (Cont’d)
EC-134
Diagnostic Procedure
1
CHECK OVERALL FUNCTION-I
With CONSULT-II
1. Turn ignition switch “ON”.
2. Select “ACCEL POS SEN” in “DATA MONITOR” mode with CONSULT-II.
3. Check “ACCEL POS SEN” signal under the following conditions.
SEF278Z
Without CONSULT-II
1. Turn ignition switch “ON”.
2. Check voltage between ECM terminal 23 and ground under the following conditions.
SEF279Z
OK or NG
OK
E
GO TO 2.
NG
E
GO TO 3.
DTC 0403 ACCEL POS SENSOR
ZD30DDTi
EC-135
2
CHECK OVERALL FUNCTION-II
With CONSULT-II
1. Turn ignition switch “ON”.
2. Select “FULL ACCEL SW” and “OFF ACCEL SW” in “DATA MONITOR” mode with CONSULT-II.
3. Check “FULL ACCEL SW” and “OFF ACCEL SW” signal under the following conditions.
SEF416Y
Without CONSULT-II
1. Turn ignition switch “ON”.
2. Check voltage between ECM terminals 31, 32 and ground under the following conditions.
SEF417Y
OK or NG
OK
E
INSPECTION END
NG
E
GO TO 11.
DTC 0403 ACCEL POS SENSOR
ZD30DDTi
Diagnostic Procedure (Cont’d)
EC-136
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст