Nissan Terrano r20e. Manual — part 425
Trouble Diagnoses
If any abnormality is found, immediately disconnect battery negative terminal.
SEL761W
STARTING SYSTEM
SC-16
Construction
MEL440H
MEL701P
STARTING SYSTEM
SC-17
YEL350D
STARTING SYSTEM
Construction (Cont’d)
SC-18
Magnetic Switch Check
Magnetic Switch Check
I
Before starting to check, disconnect battery ground cable.
I
Disconnect “M” terminal of starter motor.
1. Continuity test (between “S” terminal and switch body).
I
No continuity ... Replace.
2. Continuity test (between “S” terminal and “M” terminal).
I
No continuity ... Replace.
Pinion/Clutch Check
1. Check to see if pinion locks in one direction and rotates
smoothly in the opposite direction.
I
If it does not lock (or locks) in either direction or unusual
resistance is evident ... Replace.
2. Check pinion movement
I
If it is hard to move, apply grease or, if necessary, replace.
3. Check ball bearing.
Spin outer race of ball bearing to ensure that it turns smoothly
without binding.
I
Abnormal resistance ... Replace.
SEL555E
SEL556E
YEL546D
YEL547D
YEL548D
STARTING SYSTEM
SC-19
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст