Nissan Titan. Manual — part 658
DUCTS AND GRILLES
VTL-25
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
Grilles
Removal and Installation
INFOID:0000000009882393
DEFROSTER NOZZLE
Removal
1. Remove the instrument panel. Refer to
IP-11, "Removal and Installation"
2. Remove the heater and cooling unit assembly. Refer to
VTL-13, "Removal and Installation"
.
3. Remove the defroster nozzle.
Installation
Installation is in the reverse order of removal.
RH AND LH SIDE DEMISTER DUCT
Removal
1. Remove the instrument panel. Refer to
IP-11, "Removal and Installation"
7.
Heater and cooling unit assembly
8.
Floor duct
9.
Clips
Front
AWIIA1524ZZ
1.
Defroster grille
2.
Instrument panel
3.
Storage tray bottom cover LH
4.
Side ventilator assembly LH
5.
Cluster lid C ventilator LH
6.
Cluster lid C
7.
Cluster lid C ventilator RH
8.
Side ventilator assembly RH
9.
Storage tray bottom cover RH
VTL-26
< REMOVAL AND INSTALLATION >
DUCTS AND GRILLES
2. Remove the heater and cooling unit assembly. Refer to
VTL-13, "Removal and Installation"
.
3. Remove the RH or LH side demister duct.
4. Remove the RH or LH ventilator duct.
5. Remove the defroster nozzle.
Installation
Installation is in the reverse order of removal.
RH AND LH VENTILATOR DUCT
Removal
1. Remove the instrument panel. Refer to
IP-11, "Removal and Installation"
2. Remove the heater and cooling unit assembly. Refer to
VTL-13, "Removal and Installation"
.
3. Remove the RH or LH ventilator duct.
Installation
Installation is in the reverse order of removal.
CENTER VENTILATOR DUCT
Removal
1. Remove the instrument panel. Refer to
IP-11, "Removal and Installation"
2. Remove the heater and cooling unit assembly. Refer to
VTL-13, "Removal and Installation"
.
3. Remove the defroster nozzle.
4. Remove the RH and LH side demister ducts.
5. Remove the RH and LH ventilator ducts.
6. Remove the center ventilator duct.
Installation
Installation is in the reverse order of removal.
FLOOR DUCT
Removal
1. Remove the floor carpet. Refer to
INT-19, "Removal and Installation"
.
2. Remove the two clips and remove the floor duct.
Installation
Installation is in the reverse order of removal.
GRILLES
Removal
1. Remove the interior trim panels as necessary. Refer to
IP-11, "Removal and Installation"
.
2. Remove the grille from the interior trim panel.
Installation
Installation is in the reverse order of removal.
EVAPORATOR
VTL-27
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
EVAPORATOR
Removal and Installation for Evaporator and Expansion Valve Assembly
INFOID:0000000009882394
Heater and Cooling Unit Assembly
REMOVAL
AWIIA1525ZZ
1. Heater core cover
2. Heater core pipe bracket
3. Heater core
4. Upper bracket
5. Upper heater and cooling unit case
6. Evaporator and expansion valve assembly
7. Lower heater and cooling unit case 8. Blower motor
9. Variable blower control or front blower mo-
tor resistor
Front
VTL-28
< REMOVAL AND INSTALLATION >
EVAPORATOR
1. Remove the heater core. Refer to
VTL-15, "Removal and Installation"
.
2. Remove the defroster mode door arm.
3. Separate the heater core and cooling unit case.
4. Remove the evaporator and expansion valve assembly.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Do not reuse O-rings.
• Apply A/C oil to the O-rings of the low-pressure flexible hose and high-pressure pipe for installation.
• After charging the A/C refrigerant, check for leaks.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст