Nissan Titan. Manual — part 448
IP-18
< REMOVAL AND INSTALLATION >
A/T FINISHER
A/T FINISHER
Removal and Installation
INFOID:0000000009881994
REMOVAL
1. Remove the shift selector handle (1).
a. Push the shift selector handle cover downward and away from
the shift selector handle (1).
b. Rotate the shift selector handle (1) counterclockwise to remove.
2. Pull up on the front console upper finisher (4) to release the
metal clips and remove it from the front center console assem-
bly.
: Metal clip
3. Pull up on the storage compartment mask (3) to release the
pawls and remove it from the front center console assembly.
: Pawl
4. Remove the A/T finisher (2).
a. Pull up on A/T finisher (2) to release the metal clips and access the A/T finisher switch harness connec-
tors.
b. Disconnect A/T finisher switch harness connectors and remove the A/T finisher (2) from the front center
console assembly.
INSTALLATION
Installation is in the reverse order of removal.
AWJIA0654ZZ
CENTER CONSOLE
IP-19
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
CENTER CONSOLE
Exploded View
INFOID:0000000009881995
1.
Console lid assembly
2.
Console lid latch
3.
Console lid hinge
4.
Console lid bin mat
5.
Storage compartment mask
6.
Console reinforcement assembly
7.
Storage compartment bin mat
8.
Storage compartment
9.
Center console lower cover LH
AWJIA0951ZZ
IP-20
< REMOVAL AND INSTALLATION >
CENTER CONSOLE
Removal and Installation
INFOID:0000000009881996
REMOVAL
1. Remove the A/T finisher. Refer to
2. Remove the front center console assembly upper screws.
3. Remove shift selector assembly. Refer to
Selector Removal and Installation"
.
4. Remove instrument lower panel RH and glove box assembly.
IP-16, "Removal and Installation"
.
5. Remove center console lower cover RH/LH, then remove front
center console assembly lower screws.
6. Open the console lid assembly and remove console bin mat,
then remove the rear inner screws.
7. Move front seats forward.
8. Remove lower center console assembly screws at the rear.
9. Release center console assembly from floor and tilt to disconnect harness connectors.
10. Carefully remove center console assembly through rear door opening.
CAUTION:
Always use an assistant to steady the center console assembly during removal from vehicle inte-
rior.
INSTALLATION
Installation is in the reverse order of removal.
10. Console cover LH
11. Rear console duct
12. Rear cup holder assembly
13. A/C 120V outlet front
14. Console power socket
15. Rear finisher assembly
16. Console rear bracket
17. Heat duct
18. Rear finisher ventilator
19. Rear upper finisher
20. Console bin mat
21. Console bin
22. Console cover RH
23. Center console lower cover RH
24. Console upper finisher
25. A/T shift lock release cover
26. Shift indicator assembly
27. Cup holder insert
28. A/T finisher
ALJIA0084ZZ
INSTRUMENT LOWER PANEL RH AND GLOVE BOX
IP-21
< UNIT DISASSEMBLY AND ASSEMBLY >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
UNIT DISASSEMBLY AND ASSEMBLY
INSTRUMENT LOWER PANEL RH AND GLOVE BOX
Exploded View
INFOID:0000000009881997
Disassembly and Assembly
INFOID:0000000009881998
DISASSEMBLY
1. Remove damper clip (if equipped) from glove box.
2. Remove glove box pins and glove box.
3. Remove glove box striker screws, using power tool and remove glove box striker.
4. Remove fuse block cover.
5. Remove glove box damper screws and remove glove box damper (if equipped).
ASSEMBLY
1.
Glove box damper (if equipped)
2.
Glove box housing
3.
Clips
4.
Rubber stoppers
5.
Glove box pins
6.
Glove box
7.
Glove box striker
8.
Fuse block cover
9.
Instrument lower panel RH and glove
box assembly
WIIA0301E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст