Nissan Pathfinder (2011 year). Manual — part 470
INT-24
< REMOVAL AND INSTALLATION >
LUGGAGE FLOOR TRIM
LUGGAGE FLOOR TRIM
Component
INFOID:0000000006243565
Luggage Trim - Side
AWJIA0556GB
1.
Metal clip
2.
Garnish
3.
Luggage side upper finisher RH
4.
Luggage side lower finisher RH
5.
Cup holder and tray
6.
Access cover
7.
Luggage side lower finisher LH
8.
Cup holder
9.
Storage bin
2011 Pathfinder
LUGGAGE FLOOR TRIM
INT-25
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
Luggage Trim - Floor
Removal and Installation
INFOID:0000000006243566
REMOVAL
1. Remove the 2nd and 3rd row seat belts. Refer to
SB-6, "Removal and Installation of Rear Seat Belt"
SB-8, "Removal and Installation of Third Row Seat Belt"
2. Remove the third row seat belt buckles. Refer to
SB-8, "Removal and Installation of Third Row Seat Belt"
.
3. Remove the rear door kick plates. refer to
.
4. Remove the back door kick plate.
10. Access cover
11. Side cargo net
12. Luggage side upper finisher LH
13. Coat hook
AWJIA0057GB
1.
Floor storage bin
2.
Flipper panel
3.
Storage tray
4.
Luggage floor board latch
5.
Luggage floor board
6.
Tailgate kick plate
7.
Cargo net
A.
Clip
B.
Clip
Front
2011 Pathfinder
INT-26
< REMOVAL AND INSTALLATION >
LUGGAGE FLOOR TRIM
5. Disconnect the door open/close link. Refer to
DLK-205, "Component Structure"
.
6. Remove the cargo net hooks.
7. Remove the LH and RH luggage side lower finishers.
• Disconnect the power point on the RH side.
8. Remove the LH and RH coat hooks.
9. Remove the LH and RH luggage side upper finishers.
10. Remove the cargo net hooks LH/RH.
11. Remove the luggage floor board.
12. Remove the flipper panel.
13. Remove the storage tray.
14. Remove the floor storage bin.
INSTALLATION
Installation is in the reverse order of removal.
2011 Pathfinder
BACK DOOR TRIM
INT-27
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
BACK DOOR TRIM
Removal and Installation
INFOID:0000000006243567
REMOVAL
1. Open the back door glass.
2. Disconnect the gas spring LH and RH from the back door (through window garnish).
3. Open the back door, release the clips and remove the back door window garnish.
4. Remove the screw and the back door handle.
5. Release the clips and remove the back door finisher assembly.
INSTALLATION
Installation is in the reverse order of removal.
1.
Back door window garnish
2.
Back door finisher
3.
Back door handle bracket
4.
Back door handle
5.
First aid kit strap
6.
First aid kit
Vehicle front
WIIA0725E
2011 Pathfinder
IP-1
BODY INTERIOR
C
D
E
F
G
H
I
K
L
M
SECTION
IP
A
B
IP
N
O
P
CONTENTS
INSTRUMENT PANEL
PRECAUTION . . . . . . . . . . . ...
PRECAUTIONS . . . . . . . . . . . . ...
Precaution Necessary for Steering Wheel Rota-
tion After Battery Disconnect . . . . . . . . .....
Precaution for Work . . . . . . . . . . . . ..
PREPARATION . . . . . . . . . . .
PREPARATION . . . . . . . . . . . . ...
Special Service Tool . . . . . . . . . . . .....
Commercial Service Tool . . . . . . . . . . ..
SYMPTOM DIAGNOSIS . . . . . . . ...
SQUEAK AND RATTLE TROUBLE DIAG-
NOSES . . . . . . . . . . . . . . . .
Work Flow . . . . . . . . . . . . . . . .....
Generic Squeak and Rattle Troubleshooting . . ....
Diagnostic Worksheet . . . . . . . . . . . ...
REMOVAL AND INSTALLATION . . . ...
INSTRUMENT PANEL ASSEMBLY . . . . ..
Exploded View . . . . . . . . . . . . . .
Removal and Installation . . . . . . . . . . .
CLUSTER LID A . . . . . . . . . . . . .
Removal and Installation . . . . . . . . . . .
INSTRUMENT LOWER PANEL LH . . . . ..
Removal and Installation . . . . . . . . . . .
CLUSTER LID C . . . . . . . . . . . ...
Removal and Installation . . . . . . . . . . .
CLUSTER LID D . . . . . . . . . . . ...
Removal and Installation . . . . . . . . . . .
UPPER GLOVE BOX . . . . . . . . . .
Removal and Installation . . . . . . . . . . .
INSTRUMENT LOWER PANEL RH AND
GLOVE BOX . . . . . . . . . . . . . .
Removal and Installation . . . . . . . . . . .
A/T FINISHER . . . . . . . . . . . . ...
Removal and Installation . . . . . . . . . . .
CENTER CONSOLE . . . . . . . . . . .
Removal and Installation . . . . . . . . . . .
UNIT DISASSEMBLY AND ASSEMBLY .
CENTER CONSOLE ASSEMBLY . . . . .
Disassembly and Assembly . . . . . . . . . .
INSTRUMENT LOWER PANEL RH AND
GLOVE BOX . . . . . . . . . . . . . .
Exploded View . . . . . . . . . . . . . . .
Disassembly and Assembly . . . . . . . . . .
2011 Pathfinder
IP-2
< PRECAUTION >
PRECAUTIONS
PRECAUTION
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
INFOID:0000000006247939
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SR and SB section of this Service Man-
ual.
WARNING:
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the SR section.
• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-
ness connectors.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
• When working near the Airbag Diagnosis Sensor Unit or other Airbag System sensors with the Igni-
tion ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s) with a
hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing
serious injury.
• When using air or electric power tools or hammers, always switch the Ignition OFF, disconnect the
battery, and wait at least 3 minutes before performing any service.
Precaution Necessary for Steering Wheel Rotation After Battery Disconnect
INFOID:0000000006247940
NOTE:
• This Procedure is applied only to models with Intelligent Key system and NATS (NISSAN ANTI-THEFT SYS-
TEM).
• Remove and install all control units after disconnecting both battery cables with the ignition knob in the
″
LOCK
″
position.
• Always use CONSULT-III to perform self-diagnosis as a part of each function inspection after finishing work.
If DTC is detected, perform trouble diagnosis according to self-diagnostic results.
For models equipped with the Intelligent Key system and NATS, an electrically controlled steering lock mech-
anism is adopted on the key cylinder.
For this reason, if the battery is disconnected or if the battery is discharged, the steering wheel will lock and
steering wheel rotation will become impossible.
If steering wheel rotation is required when battery power is interrupted, follow the procedure below before
starting the repair operation.
OPERATION PROCEDURE
1. Connect both battery cables.
NOTE:
Supply power using jumper cables if battery is discharged.
2. Use the Intelligent Key or mechanical key to turn the ignition switch to the
″
ACC
″
position. At this time, the
steering lock will be released.
3. Disconnect both battery cables. The steering lock will remain released and the steering wheel can be
rotated.
4. Perform the necessary repair operation.
2011 Pathfinder
PRECAUTIONS
IP-3
< PRECAUTION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
5. When the repair work is completed, return the ignition switch to the
″
LOCK
″
position before connecting
the battery cables. (At this time, the steering lock mechanism will engage.)
6. Perform a self-diagnosis check of all control units using CONSULT-III.
Precaution for Work
INFOID:0000000006826738
• When removing or disassembling each component, be careful not to damage or deform it. If a component
may be subject to interference, be sure to protect it with a shop cloth.
• When removing (disengaging) components with a screwdriver or similar tool, be sure to wrap the component
with a shop cloth or vinyl tape to protect it.
• Protect the removed parts with a shop cloth and prevent them from being dropped.
• Replace a deformed or damaged clip.
• If a part is specified as a non-reusable part, always replace it with new one.
• Be sure to tighten bolts and nuts securely to the specified torque.
• After installation is complete, be sure to check that each part works properly.
• Follow the steps below to clean components.
- Water soluble dirt: Dip a soft cloth into lukewarm water, and wring the water out of the cloth to wipe the dirty
area.
Then rub with a soft and dry cloth.
- Oily dirt: Dip a soft cloth into lukewarm water with mild detergent (concentration: within 2 to 3%), and wipe
the dirty area.
Then dip a cloth into fresh water, and wring the water out of the cloth to wipe the detergent off. Then rub with
a soft and dry cloth.
• Do not use organic solvent such as thinner, benzene, alcohol, or gasoline.
• For genuine leather seats, use a genuine leather seat cleaner.
2011 Pathfinder
IP-4
< PREPARATION >
PREPARATION
PREPARATION
PREPARATION
Special Service Tool
INFOID:0000000006247941
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Commercial Service Tool
INFOID:0000000006247942
Tool number
(Kent-Moore No.)
Tool name
Description
—
(J-39570)
Chassis ear
Locating the noise
—
(J-43980)
NISSAN Squeak and Rattle kit
Repairing the cause of noise
—
(J-46534)
Trim tool set
For removing trim
SBT839
SBT840
AWJIA0483ZZ
(Kent-Moore No.)
Tool name
Description
(J-39565)
Engine ear
Locating the noise
Power tool
Loosening bolts, screws and nuts.
SIIA0995E
PIIB1407E
2011 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст