Nissan Pathfinder (2011 year). Manual — part 618
VTL-8
< REMOVAL AND INSTALLATION >
CONTROL UNIT
Installation
Installation is in the reverse order of removal.
REAR AIR CONTROL (REAR)
Removal
1. Remove the rear finisher assembly from the center console. Refer to
2. Remove the 4 rear air control (rear) screws (A) and the rear air
control (rear) (1) from the rear finisher assembly.
Installation
Installation is in the reverse order of removal.
ALIIA0136ZZ
2011 Pathfinder
IN-VEHICLE SENSOR
VTL-9
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
IN-VEHICLE SENSOR
Removal and Installation
INFOID:0000000006245366
REMOVAL
1. Remove the cluster lid D. Refer to
IP-17, "Removal and Installation"
2. Disconnect the in-vehicle sensor harness connector.
3. Remove the 2 screws and the in-vehicle sensor.
INSTALLATION
Installation is in the reverse order of removal.
WJIA1073E
2011 Pathfinder
VTL-10
< REMOVAL AND INSTALLATION >
OPTICAL SENSOR
OPTICAL SENSOR
Removal and Installation
INFOID:0000000006245367
REMOVAL
1. Remove the optical sensor and bezel from the center of the instrument panel.
2. Disconnect the optical sensor connector.
3. Remove the optical sensor from the bezel.
INSTALLATION
Installation is in the reverse order of removal.
2011 Pathfinder
INTAKE SENSOR
VTL-11
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
INTAKE SENSOR
Removal and Installation
INFOID:0000000006245368
REMOVAL
1. Remove lower dash side finisher. Refer to
.
2. Partialy remove front door welt.
3. Remove the upper glove box. Refer to
IP-18, "Removal and Installation"
4. Disconnect the intake sensor electrical connector.
NOTE:
The intake sensor is located on the top of the front heater and
cooling unit assembly next to the A/C evaporator cover.
5. Remove the intake sensor from the front heater and cooling unit
assembly.
INSTALLATION
Installation is in the reverse order of removal.
LJIA0133E
2011 Pathfinder
VTL-12
< REMOVAL AND INSTALLATION >
BLOWER MOTOR
BLOWER MOTOR
Component
INFOID:0000000006245369
Front Blower Motor
Rear Blower Motor
Removal and Installation
INFOID:0000000006245370
FRONT BLOWER MOTOR
Removal
1. Remove the lower glove box assembly. Refer to
IP-19, "Removal and Installation"
2. Disconnect the front blower motor electrical connector.
3. Remove the 3 screws and the front blower motor.
4. Remove the blower motor wheel.
AWIIA1470ZZ
1.
Front heater and cooling unit assembly
2.
Front blower motor
3.
Variable blower control (Automatic A/C)/
Blower motor resistor (Manual A/C)
AWIIA1503ZZ
1.
Rear blower motor
2.
Rear blower motor case
3.
Variable blower control (Automatic A/C)
/ Blower motor resistor (Manual A/C)
2011 Pathfinder
BLOWER MOTOR
VTL-13
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
Installation
Installation is in the reverse order of removal.
REAR BLOWER MOTOR
Removal
1. Remove the rear heater and cooling unit assembly. Refer to
VTL-18, "Removal and Installation"
2. Disconnect the rear blower motor electrical connector.
3. Remove the 3 screws and the rear blower motor.
4. Remove the blower motor wheel.
Installation
Installation is in the reverse order of removal.
2011 Pathfinder
VTL-14
< REMOVAL AND INSTALLATION >
VARIABLE BLOWER CONTROL
VARIABLE BLOWER CONTROL
Component
INFOID:0000000006245371
Variable Blower Control (Front)
Variable Blower Control (Rear)
Removal and Installation
INFOID:0000000006245372
FRONT VARIABLE BLOWER CONTROL
LBIA0415E
1.
Front heater and cooling unit assembly
2.
Intake door motor
3.
Air mix door motor (passenger)
4.
Variable blower control (front)
5.
Air mix door motor (driver)
6.
Mode door motor
AWIIA1472ZZ
1.
Rear blower motor
2.
Rear blower motor case
3.
Variable blower control (rear)
2011 Pathfinder
VARIABLE BLOWER CONTROL
VTL-15
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
Removal
1. Disconnect the variable blower control (front) electrical connector.
2. Remove the 2 screws and the variable blower control (front).
Installation
Installation is in the reverse order of removal.
REAR VARIABLE BLOWER CONTROL
Removal
1. Remove the rear heater and cooling unit assembly. Refer to
VTL-18, "Removal and Installation"
2. Disconnect the variable blower control (rear) electrical connector.
3. Remove the 2 screws and the variable blower control (rear).
Installation
Installation is in the reverse order of removal.
2011 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст