Nissan Pathfinder (2011 year). Manual — part 149
DLK-58
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
DOOR SWITCH
Is the inspection result normal?
YES
>> Door switch circuit is OK.
NO
>> Replace door switch.
4.
CHECK BACK DOOR LATCH CIRCUIT
• Check continuity between back door latch connector terminal 4 and ground.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace harness.
5.
CHECK BACK DOOR LATCH SWITCH
• Check continuity between back door latch switch terminals.
Is the inspection result normal?
YES
>> Back door latch switch circuit is OK.
NO
>> Replace back door latch.
Switch
Terminals
Condition
Continuity
Door switch
2 – Ground
Open
Yes
Closed
No
ALKIA0747ZZ
Connector
Terminals
Continuity
Back door latch
4 – Ground
Yes
ALKIA1703ZZ
Switch
Terminals
Condition
Continuity
Back door latch
3 – 4
Open
Yes
Closed
No
ALKIA1702ZZ
2011 Pathfinder
GLASS HATCH AJAR SWITCH
DLK-59
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
GLASS HATCH AJAR SWITCH
Description
INFOID:0000000006245452
Detects glass hatch open/close condition.
Component Function Check
INFOID:0000000006245453
1.
CHECK FUNCTION
With CONSULT-III
Check glass hatch switch in data monitor mode with CONSULT-III.
Is the inspection result normal?
YES
>> Glass hatch switch is OK.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000006245454
Regarding Wiring Diagram information, refer to
DLK-139, "Wiring Diagram - With Intelligent Key System"
.
1.
CHECK GLASS HATCH AJAR SWITCH INPUT SIGNAL
With CONSULT-III
Check glass hatch ajar switch "GLASS HATCH SW" in DATA MONITOR mode with CONSULT–III.
• When glass hatch is open:
• When glass hatch is closed:
Without CONSULT-III
Check voltage between BCM connector M19 terminals 42 and ground.
Is the inspection result normal?
YES
>> Glass hatch ajar switch circuit is OK.
NO
>> GO TO 2
2.
CHECK GLASS HATCH AJAR SWITCH CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect glass hatch ajar switch and BCM.
3. Check continuity between BCM connector (A) M19 terminal 42 and glass hatch ajar switch connector (B)
D503 terminal 1.
Monitor item
Condition
GLASS HATCH SW
CLOSE
→
OPEN: OFF
→
ON
GLASS HATCH SW
:ON
GLASS HATCH SW
:OFF
Connector
Item
Terminals
Condition
Voltage (V)
(Approx.)
( + )
( – )
M19
BCM
42
Ground
Open
↓
Closed
0
↓
Battery voltage
ALKIA1708ZZ
2011 Pathfinder
DLK-60
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
GLASS HATCH AJAR SWITCH
4. Check continuity between BCM connector (A) M19 terminal 42
and ground.
Is the inspection result normal?
YES
>> GO TO 3
NO
>> Repair or replace harness.
3.
CHECK GLASS HATCH AJAR SWITCH
Check continuity between glass hatch ajar switch connector terminal 1 and ground.
Is the inspection result normal?
YES
>> Refer to
GI-37, "Intermittent Incident"
.
NO
>> Replace glass hatch ajar switch.
42 - 1
:Continuity should exist
42 - Ground
:Continuity should not exist
ALKIA1709ZZ
Terminals
Condition
Continuity
Glass hatch ajar
switch
1 – Ground
Open
Yes
Closed
No
ALKIA0668ZZ
2011 Pathfinder
DOOR LOCK AND UNLOCK SWITCH
DLK-61
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DOOR LOCK AND UNLOCK SWITCH
DRIVER SIDE
DRIVER SIDE : Description
INFOID:0000000006245455
Transmits door lock/unlock operation to BCM.
DRIVER SIDE : Component Function Check
INFOID:0000000006245456
1.
CHECK FUNCTION
With CONSULT-III
Check CDL LOCK SW, CDL UNLOCK SW in Data Monitor mode with CONSULT-III.
Is the inspection result normal?
YES
>> Door lock and unlock switch is OK.
NO
>> Refer to
DLK-61, "DRIVER SIDE : Diagnosis Procedure"
DRIVER SIDE : Diagnosis Procedure
INFOID:0000000006245457
Regarding Wiring Diagram information, refer to
DLK-139, "Wiring Diagram - With Intelligent Key System"
.
1.
CHECK DOOR LOCK/UNLOCK SWITCH INPUT SIGNAL
With CONSULT-III
Check main power window and door lock/unlock switch ("CDL LOCK SW", "CDL UNLOCK SW") in DATA
MONITOR mode in CONSULT–III.
• When main power window and door lock/unlock switch is turned to LOCK:
• When main power window and door lock/unlock switch is turned to UNLOCK:
Without CONSULT-III
1. Remove key from ignition key cylinder.
2. Using an oscilloscope, check the signal between BCM connector M18 terminal 22 and ground when the
main power window and door lock/unlock switch is turned to LOCK or UNLOCK.
3. Make sure the signals which are shown in the figure below can be detected during 10 seconds just after
the door lock/unlock switch is turned to LOCK or UNLOCK.
Monitor item
Condition
CDL LOCK SW
LOCK
: ON
UNLOCK
: OFF
CDL UNLOCK SW
LOCK
: OFF
UNLOCK
: ON
CDL LOCK SW
:ON
CDL UNLOCK SW
:ON
2011 Pathfinder
DLK-62
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
DOOR LOCK AND UNLOCK SWITCH
Is the inspection result normal?
YES
>> Door lock and unlock switch circuit is OK.
NO
>> GO TO 2
2.
CHECK BCM OUTPUT SIGNAL
1. Turn ignition switch OFF.
2. Using the vehicle operational Intelligent Key, press and hold the UNLOCK button for more than 3 sec-
onds.
Is the inspection result normal?
YES
>> GO TO 3
NO
>> Replace BCM. Refer to
BCS-55, "Removal and Installation"
3.
CHECK DOOR LOCK/UNLOCK SWITCH GROUND HARNESS
1. Disconnect main power window and door lock/unlock switch.
2. Check continuity between main power window and door lock/
unlock switch connector D8 terminal 17 and ground.
Is the inspection result normal?
YES
>> GO TO 4
NO
>> Repair or replace harness.
4.
CHECK POWER WINDOW SERIAL LINK CIRCUIT
1. Disconnect BCM.
2. Check continuity between BCM connector M18 terminal 22 and main power window and door lock/unlock
switch connector D7 terminal 14.
Connector
Terminal
Voltage (V)
( + )
( – )
M18
22
Ground
PIIA6379E
PIIA1297E
The front windows should be lowered.
17 - Ground
: Continuity should exist.
LIIA0392E
2011 Pathfinder
DOOR LOCK AND UNLOCK SWITCH
DLK-63
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
3. Check continuity between BCM connector M18 terminal 22 and ground.
Is the inspection result normal?
YES
>> Replace main power window and door lock/unlock switch.
NO
>> Repair or replace harness.
PASSENGER SIDE
PASSENGER SIDE : Description
INFOID:0000000006245458
Transmits door lock/unlock operation to BCM.
PASSENGER SIDE : Component Function Check
INFOID:0000000006245459
1.
CHECK FUNCTION
With CONSULT-III
Check CDL LOCK SW, CDL UNLOCK SW in Data Monitor mode with CONSULT-III.
Is the inspection result normal?
YES
>> Door lock and unlock switch is OK.
NO
>> Refer to
DLK-63, "PASSENGER SIDE : Diagnosis Procedure"
PASSENGER SIDE : Diagnosis Procedure
INFOID:0000000006245460
Regarding Wiring Diagram information, refer to
DLK-139, "Wiring Diagram - With Intelligent Key System"
.
1.
CHECK DOOR LOCK/UNLOCK SWITCH INPUT SIGNAL
22 - 14
: Continuity should exist.
LIIA0394E
22 - Ground
: Continuity should not exist.
LIIA2359E
Monitor item
Condition
CDL LOCK SW
LOCK
: ON
UNLOCK
: OFF
CDL UNLOCK SW
LOCK
: OFF
UNLOCK
: ON
2011 Pathfinder
DLK-64
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
DOOR LOCK AND UNLOCK SWITCH
With CONSULT-III
Check power window and door lock/unlock switch RH ("CDL LOCK SW", "CDL UNLOCK SW") in DATA MON-
ITOR mode in CONSULT–III.
• When power window and door lock/unlock switch RH is turned to LOCK:
• When power window and door lock/unlock switch RH is turned to UNLOCK:
Without CONSULT-III
1. Remove key from ignition key cylinder.
2. Using an oscilloscope, check the signal between BCM connector M18 terminal 22 and ground when
power window and door lock/unlock switch RH is turned to LOCK or UNLOCK.
3. Make sure the signals which are shown in the figure below can be detected during 10 seconds just after
the power window and door lock/unlock switch RH is turned to LOCK or UNLOCK.
Is the inspection normal?
YES
>> Power window and door lock/unlock switch RH circuit is OK.
NO
>> GO TO 2
2.
CHECK BCM OUTPUT SIGNAL
1. Turn ignition switch OFF.
2. Using the vehicle operational Intelligent Key, press and hold the UNLOCK button for more than 3 sec-
onds.
Is the inspection result normal?
YES
>> GO TO 3
NO
>> Replace BCM. Refer to
BCS-55, "Removal and Installation"
3.
CHECK DOOR LOCK/UNLOCK SWITCH GROUND HARNESS
1. Disconnect power window and door lock/unlock switch RH.
2. Check continuity between power window and door lock/unlock
switch RH connector D105 terminal 11 and ground
Is the inspection normal?
YES
>> GO TO 4
NO
>> Repair or replace harness.
CDL LOCK SW
:ON
CDL UNLOCK SW
:ON
Connector
Terminal
Voltage (V)
( + )
( – )
M18
22
Ground
PIIA6379E
PIIA1297E
The front windows should be lowered.
11 - Ground
: Continuity should exist.
LIIA1140E
2011 Pathfinder
DOOR LOCK AND UNLOCK SWITCH
DLK-65
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
4.
CHECK POWER WINDOW SERIAL LINK CIRCUIT
1. Disconnect BCM.
2. Check continuity between BCM connector M18 terminal 22 and power window and door lock/unlock
switch RH connector D105 terminal 16.
3. Check continuity between BCM connector M18 terminal 22 and ground.
Is the inspection normal?
YES
>> Replace power window and door lock/unlock switch RH.
NO
>> Repair or replace harness.
22 - 16
: Continuity should exist.
LIIA0395E
22 - Ground
: Continuity should not exist.
LIIA2359E
2011 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст