Nissan Titan (2023 year). Manual in english — page 36
Fluid Type
Capacity (approximate)
Recommended Fluids/Lubricants
Metric
Measure
US
Measure
Imperial
Measure
Transfer fluid
Non-XD model
1.5 L
1-5/8 qt
1-3/8 qt
• Genuine NISSAN ATF D3M or equivalent.
• Using fluid other than Genuine NISSAN ATF D3M (or equivalent)
may cause deterioration in driveability and transfer durability, and
may damage the transfer. Damage caused by fluids other than as
recommended is not covered by the NISSAN’s New Vehicle Limited
Warranty.
XD model
1.8 L
1-7/8 qt
1-5/8 qt
Power Steering Fluid (PSF)
—
—
—
• Genuine NISSAN PSF II or equivalent.
Brake fluid
—
—
—
• Genuine NISSAN Super Heavy Duty Brake Fluid *2 or equivalent
DOT 3.
*2 Available in mainland U.S.A. through a NISSAN dealer.
Multi-purpose grease
—
—
—
• NLGI No. 2 (Lithium Soap base) (or equivalent).
Air conditioning system refrigerant
—
—
—
• HFO-1234yf (R-1234yf) (or equivalent).
• For additional information, see “Air conditioner system refrigerant
and oil recommendations” (P. 10-8).
Air conditioning system oil
—
—
—
• Genuine NISSAN A/C System Oil Type PAG (VC100yf).
• For additional information, see “Air conditioner system refrigerant
and oil recommendations” (P. 10-8).
Windshield-washer fluid
4.5 L
1-1/4 gal
1 gal
• Genuine NISSAN Windshield Washer Concentrate Cleaner & Anti-
freeze fluid or equivalent.
Technical and consumer information
10-3
-------------------------------------------------------------------------------------------------------------------------------------------------------------
FUEL RECOMMENDATION
NISSAN recommends the use of unleaded
premium gasoline with an octane rating of
at least 91 AKI (Anti-Knock Index) number
(Research octane number 96). If unleaded
premium gasoline is not available, you may
use unleaded regular gasoline with an oc-
tane rating of at least 87 AKI number (Re-
search octane number 91), but you may
notice a decrease in performance.
CAUTION
•
Using a fuel other than that specified
could adversely affect the emission
control system, and may also affect
the warranty coverage.
•
Under no circumstances should a
leaded gasoline be used, because
this
will
damage
the
three-way
catalyst.
•
Do not use E-15 or E-85 fuel in your
vehicle. Your vehicle is not designed
to run on E-15 or E-85 fuel. Using E-15
or E-85 fuel in a vehicle not specifi-
cally designed for E-15 or E-85 fuel
can adversely affect the emission
control devices and systems of the
vehicle. Damage caused by such fuel
is not covered by the NISSAN New Ve-
hicle Limited Warranty.
•
Do not use fuel that contains the oc-
tane booster methylcyclopentadi-
enyl manganese tricarbonyl (MMT).
Using fuel containing MMT may ad-
versely affect vehicle performance
and vehicle emissions. Not all fuel
dispensers are labeled to indicate
MMT content, so you may have to
consult your gasoline retailer for
more details. Note that Federal and
California laws prohibit the use of
MMT in reformulated gasoline.
•
U.S. government regulations require
ethanol dispensing pumps to be
identified by a small, square, orange
and black label with the common ab-
breviation or the appropriate per-
centage for that region.
Gasoline specifications
NISSAN recommends using gasoline that
meets the World-Wide Fuel Charter (WWFC)
specifications where it is available. Many of
the automobile manufacturers developed
this specification to improve emission con-
trol system and vehicle performance. Ask
your service station manager if the gaso-
line meets the WWFC specifications.
Reformulated gasoline
Some fuel suppliers are now producing re-
formulated gasolines. These gasolines are
specially designed to reduce vehicle emis-
sions. NISSAN supports efforts towards
cleaner air and suggests that you use re-
formulated gasoline when available.
Gasoline containing oxygenates
Some fuel suppliers sell gasoline contain-
ing oxygenates such as ethanol, Methyl
Tert-butyl Ether (MTBE) and methanol with
or without advertising their presence.
NISSAN does not recommend the use of
fuels of which the oxygenate content and
the fuel compatibility for your NISSAN can-
not be readily determined. If in doubt, ask
your service station manager.
10-4
Technical and consumer information
-------------------------------------------------------------------------------------------------------------------------------------------------------------
If
you
use
oxygenate-blend
gasoline,
please take the following precautions as
the usage of such fuels may cause vehicle
performance problems and/or fuel system
damage.
•
The fuel should be unleaded and have
an octane rating no lower than that
recommended for unleaded gasoline.
•
If
an
oxygenate-blend
other
than
methanol blend is used, it should con-
tain no more than 10% oxygenate.
(MTBE may, however, be added up to
15%.)
•
E-15 fuel contains more than 10% oxy-
genate. E-15 fuel will adversely affect
the emission control devices and sys-
tems of the vehicle and should not be
used. Damage caused by such fuel is
not covered by the NISSAN New Vehicle
Limited Warranty.
•
If a methanol blend is used, it should
contain no more than 5% methanol
(methyl
alcohol,
wood
alcohol).
It
should also contain a suitable amount
of appropriate cosolvents and corro-
sion inhibitors. If not properly formu-
lated with appropriate cosolvents and
corrosion inhibitors, such methanol
blends may cause fuel system damage
and/or vehicle performance problems.
At this time, sufficient data is not avail-
able to ensure that all methanol blends
are suitable for use in NISSAN vehicles.
If any driveability problems such as engine
stalling and difficult hot-starting are expe-
rienced after using oxygenate-blend fuels,
immediately change to a non-oxygenate
fuel or a fuel with a low blend of MTBE.
Take care not to spill gasoline during re-
fueling. Gasoline containing oxygenates
can cause paint damage.
E–15 fuel
E-15 fuel is a mixture of approximately 15%
fuel ethanol and 85% unleaded gasoline.
E-15 can only be used in vehicles designed
to run on E-15 fuel. Do not use E-15 in your
vehicle. U.S. government regulations re-
quire fuel ethanol dispensing pumps to be
identified with small, square, orange and
black label with the common abbreviation
or the appropriate percentage for that
region.
E–85 fuel
E-85 fuel is a mixture of approximately 85%
fuel ethanol and 15% unleaded gasoline.
E-85 can only be used in a Flexible Fuel
Vehicle (FFV). Do not use E-85 in your ve-
hicle. U.S. government regulations require
fuel ethanol dispensing pumps to be iden-
tified by a small, square, orange and black
label with the common abbreviation or the
appropriate percentage for that region.
Fuel containing MMT
MMT, or methylcyclopentadienyl manga-
nese tricarbonyl, is an octane boosting ad-
ditive. NISSAN does not recommend the
use of fuel containing MMT. Such fuel may
adversely affect vehicle performance, in-
cluding the emissions control system. Note
that while some fuel pumps label MMT
content, not all do, so you may have to
consult your gasoline retailer for more
details.
Technical and consumer information
10-5
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Aftermarket fuel additives
NISSAN does not recommend the use of
any aftermarket fuel additives (for ex-
ample,
fuel
injector
cleaner,
octane
booster, intake valve deposit removers,
etc.) which are sold commercially. Many of
these additives intended for gum, varnish
or deposit removal may contain active sol-
vents or similar ingredients that can be
harmful to the fuel system and engine.
Octane rating tips
Using unleaded gasoline with an octane
rating lower than recommended can
cause persistent, heavy “spark knock.”
(“Spark knock” is a metallic rapping
noise.) If severe, this can lead to engine
damage. If you detect a persistent heavy
spark knock even when using gasoline
of the stated octane rating, or if you hear
steady spark knock while holding a
steady speed on level roads, it is recom-
mended that you have a NISSAN dealer
correct the condition. Failure to correct
the condition is misuse of the vehicle, for
which NISSAN is not responsible.
Incorrect ignition timing may result in
spark knock, after-run and/or overheating,
which may cause excessive fuel consump-
tion or engine damage. If any of the above
symptoms are encountered, have your ve-
hicle checked. It is recommended that you
visit a NISSAN dealer for servicing.
However, now and then you may notice
light spark knock for a short time while
accelerating or driving up hills. This is not
a cause for concern, because you get the
greatest fuel benefit when there is light
spark knock for a short time under heavy
engine load.
10-6
Technical and consumer information
-------------------------------------------------------------------------------------------------------------------------------------------------------------
ENGINE OIL AND OIL FILTER
RECOMMENDATIONS
Selecting the correct oil
It is essential to choose the correct grade,
quality and viscosity engine oil to ensure
satisfactory engine life and performance.
For additional information, see “Recom-
mended fluids/lubricants and capacities”
(P. 10-2). NISSAN recommends the use of an
energy conserving oil in order to improve
fuel economy.
Select only engine oils that meet the
American Petroleum Institute (API) certifi-
cation or International Lubricant Standard-
ization and Approval Committee (ILSAC)
certification and SAE viscosity standard.
These oils have the API certification mark
on the front of the container. Oils which do
not have the specified quality label should
not be used as they could cause engine
damage.
Oil additives
NISSAN does not recommend the use of oil
additives. The use of an oil additive is not
necessary when the proper oil type is used
and maintenance intervals are followed.
Oil which may contain foreign matter or
has been previously used should not be
used.
Oil viscosity
The engine oil viscosity or thickness
changes with temperature. Because of
this, it is important to select the engine oil
viscosity based on the temperatures at
which the vehicle will be operated before
the next oil change. Choosing an oil viscos-
ity other than that recommended could
cause serious engine damage.
Selecting the correct oil filter
Your new NISSAN vehicle is equipped with a
high-quality Genuine NISSAN oil filter. When
replacing, use a Genuine NISSAN oil filter or
its equivalent for the reason described in
“Change intervals.”
LTI2587
Technical and consumer information
10-7
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Change intervals
The oil and oil filter change intervals for
your engine are based on the use of the
specified quality oils and filters. Using en-
gine oil and filters that are not of the speci-
fied quality, or exceeding recommended oil
and filter change intervals could reduce
engine life. Damage to the engine caused
by improper maintenance or use of incor-
rect oil and filter quality and/or viscosity is
not covered by the NISSAN New Vehicle
Limited Warranty.
Your engine was filled with a high-quality
engine oil when it was built. You do not have
to change the oil before the first recom-
mended change interval. Oil and filter
change intervals depend upon how you
use your vehicle.
Operation under the following conditions
may require more frequent oil and filter
changes:
• repeated short distance driving at cold
outside temperatures
• driving in dusty conditions
• extensive idling
• towing a trailer
• stop and go commuting
For additional information, see the “Mainte-
nance and schedules” section of this
manual.
AIR CONDITIONER SYSTEM
REFRIGERANT AND OIL
RECOMMENDATIONS
The air conditioner system in your
NISSAN vehicle must be charged with the
refrigerant HFO-1234yf (R-1234yf) and
NISSAN
A/C
system
oil
Type
PAG
(VC100yf) or the exact equivalents.
CAUTION
The use of any other refrigerant or oil
may cause severe damage to the air
conditioning system and may require
the replacement of all air conditioner
system components.
The refrigerant HFO-1234yf (R-1234yf) in
your NISSAN vehicle does not harm the
earth's ozone layer. Although this refriger-
ant does not affect the earth's atmo-
sphere, certain government regulations re-
quire the recovery and recycling of any
refrigerant during automotive air condi-
tioner system service. Air conditioner sys-
tem should only be service by trained and
certified technicians to ensure proper and
safe operation (SAE J2845). A NISSAN dealer
has the trained technicians and equip-
ment needed to recover and recycle your
air conditioner system refrigerant. Only
new and SAE J2842 certified evaporator(s)
shall be used as replacement parts.
A damaged or leaking air conditioning
evaporator shall never be repaired or re-
placed with one removed from a used or
salvaged vehicle. To replace a damaged or
leaking evaporator, use only new and SAE
J2842 certified evaporator(s). It is recom-
mended that you visit a NISSAN dealer
when
servicing
your
air
conditioner
system.
10-8
Technical and consumer information
-------------------------------------------------------------------------------------------------------------------------------------------------------------
ENGINE
Model
5.6L 8 cylinder (VK56VD engine model)
Type
Gasoline, 4-cycle, DOHC
Cylinder arrangement
8-cylinder, V-block, Slanted at 90°
Bore x Stroke
Metric measure
98 mm x 92 mm
US measure
3.858 in x 3.622 in
Displacement
Metric measure
5,552 cm
3
US measure
338.78 cu in
Firing order
1–8–7–3–6–5–4–2
Idle speed
No adjustment is necessary.
A/T (in “N” position)
Ignition timing (degree B.T.D.C. at idle speed)
CO % at idle
Spark plug
DILKAR7B11
Spark plug gap (Nominal)
Metric measure
1.1 mm
US measure
0.043 in
Camshaft operation
Timing chain
SPECIFICATIONS
Technical and consumer information
10-9
-------------------------------------------------------------------------------------------------------------------------------------------------------------
WHEELS AND TIRES
Wheel type
Offset
Metric
Measure
Offset
US
Measure
Size
Steel
44 mm
1.73 in
17 x 7.5 J
25 mm
0.98 in
18 x 8.0 J
Alloy
25 mm
0.98 in
18 x 8.0 J
23 mm
0.91 in
18 x 8.0 J
41.5 mm
1.63 in
18 x 7.5 J
23 mm
0.91 in
20 x 8.0 J
41.5 mm
1.63 in
20 x 7.5 J
Tire type
Performance type
Size
Passenger
All season
265/70R18
Passenger
All season
P265/70R18
Passenger
All season
P275/60R20
Passenger
All terrain
P275/70R18
Light truck
All season
LT245/75R17
Light truck
All terrain
LT275/65R18
Light truck
All season
LT265/60R20
Spare wheel
type
Size
Full size
(Matching)
Steel
LT245/75R17
Full size (Non
Matching) Steel
265/70R18
P265/70R18
P275/70R18
P275/60R20
Full size (Non
Matching) Alloy
LT265/60R20
Full size
(Matching) Alloy
LT265/60R20
LT275/65R18
10-10
Technical and consumer information
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DIMENSIONS AND WEIGHTS
Non-XD crew cab models
Models
Metric Measure
US Measure
Overall Length:
Without front license plate
bracket:
S/SV
5791.5 mm
228.0 in
Pro-4X/Platinum
5792.0 mm
228.0 in
With license plate bracket:
S/SV,
5795.1 mm
228.2 in
Pro-4X/Platinum
5795.0 mm
228.2 in
Overall width:
Tow mirrors non-extended:
2,494 mm
98.2 in
Tow mirrors extended:
2,640 mm
103.9 in
Without overfenders:
2WD: S/SV
2,018.5 mm
79.5 in
4WD: S/SV
2,018.5 mm
79.5 in
With overfenders:
Pro-4X and Platinum
2,049.6 mm
80.7 in
Overall height:
2WD: S/SV
1,915.1 mm
75.4 in
4WD: S/SV
1,930 mm
76.0 in
2WD: Platinum
1,920.4 mm
75.6 in
4WD: Pro-4X/Platinum
1,961 mm
77.2 in
Technical and consumer information
10-11
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Models
Metric Measure
US Measure
Front Track:
S/SV
1,725 mm
67.9 in
Pro-4X/Platinum
1,729 mm
68.1 in
Rear Track:
S/SV
1,725 mm
67.9 in
Pro-4X/Platinum
1,729 mm
68.1 in
Wheelbase:
3,550 mm
139.8 in
Gross vehicle weight rating:
Refer to the “F.M.V.S.S. certifi-
cation label” on the center
pillar between the driver's
side front and rear doors.
Gross axle weight rating:
Front:
Rear:
XD crew cab models
Models
Metric Measure
US Measure
Overall Length:
Without front license plate
bracket:
S, SV, Platinum
6,175 mm
243.1 in
Pro-4X
6,200 mm
244.1 in
With front license plate
bracket:
S/SV
6,181.8 mm
243.4 in
Pro-4X/Platinum
6,208.5 mm
244.4 in
10-12
Technical and consumer information
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Models
Metric Measure
US Measure
Overall width:
Tow mirrors non-extended:
2,494 mm
98.2 in
Tow mirrors extended:
2,640 mm
103.9 in
Without overfenders:
S/SV
2,018.5 mm
79.5 in
With overfenders:
Pro-4X/Platinum
2,049.6 mm
80.7 in
Overall height:
S
1981.6 mm
78.0 in
SV
1982.4 mm
78.0 in
Pro-4X
1,992.3 mm
78.4 in
Platinum
2,002.8 mm
78.9 in
Front Track:
S/SV
1,738 mm
68.4 in
Pro-4X/Platinum
1,743 mm
68.6 in
Rear Track:
S/SV
1,737 mm
68.4 in
Pro-4X/Platinum
1,742 mm
68.6 in
Wheelbase:
3,850 mm
151.6 in
Gross vehicle weight rating:
Refer to the “F.M.V.S.S. certifi-
cation label” on the center
pillar between the driver's
side front and rear doors.
Gross axle weight rating:
Front:
Rear:
Technical and consumer information
10-13
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Non-XD King Cab® models
Models
Metric Measure
US Measure
Overall Length:
Without front license plate
bracket:
S/SV
5,791.5 mm
228.0 in
With front license plate
bracket:
S/SV
5,795.1 mm
228.2 in
Overall width:
Without overfenders:
S/SV
2,018.5 mm
79.5 in
Overall height:
2WD: S
1,908 mm
75.1 in
4WD: S
1,923 mm
75.7 in
2WD: SV
1,908 mm
75.1 in
4WD: SV
1,923 mm
75.7 in
Front and Rear Track:
1,725 mm
67.9 in
Wheelbase:
3,550 mm
139.8 in
Gross vehicle weight rating:
Refer to the “F.M.V.S.S. certifi-
cation label” on the center
pillar between the driver's
side front and rear doors.
Gross axle weight rating:
Front:
Rear:
10-14
Technical and consumer information
-------------------------------------------------------------------------------------------------------------------------------------------------------------
When planning to drive your NISSAN ve-
hicle in another country,
you should first
find out if the fuel available is suitable for
your vehicle's engine.
Using fuel with an octane rating that is too
low may cause engine damage. All gaso-
line vehicles must be operated with un-
leaded gasoline. Therefore, avoid taking
your vehicle to areas where appropriate
fuel is not available.
When transferring the registration of
your vehicle to another country, state,
province or district,
it may be necessary
to modify the vehicle to meet local laws
and regulations.
The laws and regulations for motor vehicle
emission control and safety standards
vary according to the country, state, prov-
ince or district; therefore, vehicle specifica-
tions may differ.
When any vehicle is to be taken into an-
other country, state, province or district
and registered, its modifications, trans-
portation and registration are the re-
sponsibility of the user. NISSAN is not re-
sponsible for any inconvenience that
may result.
VEHICLE IDENTIFICATION NUMBER
(VIN) PLATE
The vehicle identification number (VIN)
plate is attached as shown. This number is
the identification for your vehicle and is
used in the vehicle registration.
VEHICLE IDENTIFICATION NUMBER
(chassis number)
The vehicle identification number is lo-
cated as shown.
LTI2195
LTI0086
WHEN TRAVELING OR REGISTERING
IN ANOTHER COUNTRY
VEHICLE IDENTIFICATION
Technical and consumer information
10-15
-------------------------------------------------------------------------------------------------------------------------------------------------------------
ENGINE SERIAL NUMBER
The engine serial number is stamped on
the engine as shown.
F.M.V.S.S. CERTIFICATION LABEL
The
Federal/Canadian
Motor
Vehicle
Safety Standard (F.M.V.S.S.) certification la-
bel is affixed as shown. This label contains
valuable vehicle information, such as:
(GVWR), (GAWR), month and year of manu-
facture, (VIN), etc. Review it carefully.
WTI0095
5.6L 8 cylinder (VK56VD engine model)
LTI0135
Type A (if so equipped)
WTI0099
Type B (if so equipped)
10-16
Technical and consumer information
-------------------------------------------------------------------------------------------------------------------------------------------------------------
EMISSION CONTROL
INFORMATION LABEL
The emission control information label is
attached to the underside of the hood as
shown.
TIRE AND LOADING INFORMATION
LABEL
LTI2197
XD models
LTI2242
Except XD models
LTI2480
Type A (if so equipped)
Technical and consumer information
10-17
-------------------------------------------------------------------------------------------------------------------------------------------------------------
The cold tire pressure is shown on the Tire
and Loading Information label. The label is
located as shown.
AIR CONDITIONER SPECIFICATION
LABEL
The air conditioner specification label is af-
fixed to the underside of the hood as
shown.
LTI2196
Type B (if so equipped)
LTI2198
XD models
LTI2243
Except XD models
10-18
Technical and consumer information
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст