Nissan NV200 Compact Cargo Van (2018 year). Instruction — part 10

1. Move the air intake lever to the

position.

2. Turn

the

air

flow

control

dial

to

the

position.

3. Turn the

fan control dial to the

desired position.

4. Turn the temperature control dial to

the desired position.

Heating and defogging

This mode heats the interior and defogs
the windshield.

1. Move the air intake lever to the

position.

2. Turn

the

air

flow

control

dial

to

the

position.

3. Turn the

fan control dial to the de-

sired position.

4. Turn the temperature control dial to

the desired position between the
middle and the hot position.

When the

or

position is se-

lected, the air conditioner automatically
turns on (however, the indicator light will
not illuminate). In this position, the air con-
ditioner cannot be turned off. When the air

flow control is turned to any position other

than

or

(the air conditioner will

continue operating) and can be turned off
using the air conditioner button. This dehu-
midifies the air, which helps defog the
windshield.

Operating tips

Clear snow and ice from the wiper blades
and air inlet in front of the windshield.
This improves heater operation.

AIR CONDITIONER OPERATION

Start the engine, turn the

fan control

dial to the desired position, and press
the

button to activate the air condi-

tioner. When the air conditioner is on, cool-
ing

and

dehumidifying

functions

are

added to the heater operation.
The air conditioner cooling function op-
erates only when the engine is running.

Cooling

This mode is used to cool and dehumidify
the air.

1. Move the air intake lever to the

position.

2. Turn

the

air

flow

control

dial

to

the

position.

3. Turn the

fan control dial to the

desired position.

4. Press the

button. The indicator

light comes on.

5. Turn the temperature control dial to

the desired position.

∙ For quick cooling when the outside

temperature is high, move the air intake
lever to the

position. Be sure to re-

turn to the

position for normal

cooling.

Dehumidified heating

This mode is used to heat and dehumidify
the air.

1. Move the air intake lever to the

position.

2. Turn

the

air

flow

control

dial

to

the

position.

3. Turn the

fan control dial to the

desired position.

4. Press the

button. The indicator

light comes on.

5. Turn the temperature control dial to

the desired position.

4-22

Monitor, climate, audio, phone and voice recognition systems

Dehumidified defogging

This mode is used to defog the windows
and dehumidify the air.

1. Move the air intake lever to the

position.

2. Turn

the

air

flow

control

dial

to

the

position.

3. Turn the

fan control dial to the

desired

position.

When

the

or

position is selected, the air

conditioner automatically turns on
(however, the indicator light will not illu-
minate). In this position, the air condi-
tioner cannot be turned off. When the
air flow control is turned to any position

other than

or

(the air condi-

tioner will continue operating). and can
be turned off using the air conditioner
button. This dehumidifies the air, which
helps defog the windshield.

4. Turn the temperature control dial to

the desired position.

Operating tips

∙ Keep the windows closed while the air

conditioner is in operation.

∙ After parking in the sun, drive for 2 or

3 minutes with the windows open to
vent hot air from the passenger com-
partment before closing the windows.
This allows the air conditioner to cool
the interior more quickly.

∙ The air conditioning system should

be

operated

for

approximately

10 minutes at least once a month.
This helps prevent damage to the
system due to lack of lubrication.

∙ A visible mist may be seen coming from

the ventilators in hot, humid conditions
as the air is cooled rapidly. This does not
indicate a malfunction.

∙ If the high temperature warning

light

illuminates in red indicat-

ing engine coolant temperature is
over the normal range, turn the air
conditioner off. For additional infor-
mation, refer to “If your vehicle over-
heats” in the “In case of emergency”
section of this manual.

AIR FLOW CHARTS

The following charts show the button and
dial positions for MAXIMUM AND QUICK
heating, cooling or defrosting. The air in-
take lever should always be in the
position for heating and defrosting.

Monitor, climate, audio, phone and voice recognition systems

4-23

LHA4463

LHA4464

4-24

Monitor, climate, audio, phone and voice recognition systems

LHA4465

LHA4466

Monitor, climate, audio, phone and voice recognition systems

4-25

LHA4496

4-26

Monitor, climate, audio, phone and voice recognition systems

The air conditioner system in your NISSAN
vehicle is charged with a refrigerant de-
signed with the environment in mind.
This refrigerant does not harm the
earth’s ozone layer.

Special charging equipment and lubricant
is required when servicing your NISSAN air
conditioner. Using improper refrigerants or
lubricants will cause severe damage to
your air conditioner system. For additional
information, refer to “Air conditioner sys-
tem refrigerant and oil recommendations”
in the “Technical and consumer informa-
tion” section of this manual.

It is recommended that you visit a NISSAN
dealer to service your “environmentally
friendly” air conditioner system.

WARNING

The air conditioner system contains re-
frigerant under high pressure. To avoid
personal injury, any air conditioner ser-
vice should be done only by an experi-
enced

technician

with

proper

equipment.

RADIO

With the ignition placed in the ACC or ON
position, press the

(power) or ON•OFF

button to turn the radio on. If you listen to
the radio with the engine not running, the
ignition should be placed in the ACC posi-
tion.
Radio reception is affected by station sig-
nal strength, distance from radio transmit-
ter, buildings, bridges, mountains and other
external influences. Intermittent changes
in reception quality normally are caused by
these external influences.

Using a cellular phone in or near the ve-
hicle may influence radio reception qual-
ity.

Radio reception

Your NISSAN radio system is equipped with
state-of-the-art electronic circuits to en-
hance radio reception. These circuits are
designed to extend reception range, and to
enhance the quality of that reception.

However, there are some general charac-
teristics of both FM and AM radio signals
that can affect radio reception quality in a
moving vehicle, even when the finest
equipment is used. These characteristics
are completely normal in a given reception

area and do not indicate any malfunction
in your NISSAN radio system.

Reception

conditions

will

constantly

change because of vehicle movement.
Buildings, terrain, signal distance and inter-
ference from other vehicles can work
against ideal reception. Described below
are some of the factors that can affect your
radio reception.

Some cellular phones or other devices may
cause interference or a buzzing noise to
come from the audio system speakers.
Storing the device in a different location
may reduce or eliminate the noise.

FM RADIO RECEPTION

Range: FM range is normally limited to 25 –
30 mi (40 – 48 km), with monaural (single
channel) FM having slightly more range
than stereo FM. External influences may
sometimes interfere with FM station re-
ception even if the FM station is within 25
mi (40 km). The strength of the FM signal is
directly related to the distance between
the transmitter and receiver. FM signals fol-
low a line-of-sight path, exhibiting many of
the same characteristics as light. For ex-
ample, they will reflect off objects.

SERVICING AIR CONDITIONER

AUDIO SYSTEM

Monitor, climate, audio, phone and voice recognition systems

4-27

Fade and drift: As your vehicle moves away
from a station transmitter, the signals will
tend to fade and/or drift.

Static and flutter: During signal interfer-
ence from buildings, large hills or due to
antenna position (usually in conjunction
with increased distance from the station
transmitter), static or flutter can be heard.
This can be reduced by adjusting the treble
control to reduce treble response.

Multipath reception: Because of the reflec-
tive characteristics of FM signals, direct and
reflected signals reach the receiver at the
same time. The signals may cancel each
other, resulting in momentary flutter or loss
of sound.

AM RADIO RECEPTION

AM signals, because of their low frequency,
can bend around objects and skip along
the ground. In addition, the signals can be
bounced off the ionosphere and bent back
to earth. Because of these characteristics,
AM signals are also subject to interference
as they travel from transmitter to receiver.

Fading: Occurs while the vehicle is passing
through freeway underpasses or in areas
with many tall buildings. It can also occur

for several seconds during ionospheric tur-
bulence even in areas where no obstacles
exist.

Static: Caused by thunderstorms, electrical
power lines, electric signs and even traffic
lights.

SATELLITE RADIO RECEPTION (if so
equipped)

When the satellite radio is used for the first
time or the battery has been replaced, the
satellite radio may not work properly. This
is not a malfunction. Wait more than
10 minutes with satellite radio ON and the
vehicle outside of any metal or large build-
ing for satellite radio to receive all of the
necessary data.

No satellite radio reception is available and
“NO SAT” is displayed when the SAT band
option is selected unless optional satellite
receiver and antenna are installed and a
SiriusXM® Satellite Radio service subscrip-
tion is active. Satellite radio is not available
in Alaska, Hawaii and Guam.

Satellite radio performance may be af-
fected if cargo carried on the roof blocks
the satellite radio signal.

If possible, do not put cargo over the satel-
lite antenna.

A build up of ice on the satellite radio an-
tenna can affect satellite radio perfor-
mance. Remove the ice to restore satellite
radio reception.

4-28

Monitor, climate, audio, phone and voice recognition systems

AUDIO OPERATION PRECAUTIONS

Compact disc (CD) player

CAUTION

∙ Do not force a compact disc into the

CD insert slot. This could damage the
CD and/or CD player.

∙ Trying to load a CD with the CD door

closed could damage the CD and/or
CD player.

∙ Only one CD can be loaded into the CD

player at a time.

∙ Only use high quality 4.7 in (12 cm)

round discs that have the “COMPACT
disc DIGITAL AUDIO” logo on the disc
or packaging.

∙ During cold weather or rainy days, the

player may malfunction due to the
humidity. If this occurs, remove the
CD and dehumidify or ventilate the
player completely.

∙ The player may skip while driving on

rough roads.

∙ The CD player sometimes cannot

function

when

the

compartment

temperature is extremely high or low.
Decrease/increase the temperature
before use.

∙ Do not expose the CD to direct sun-

light.

∙ CDs that are in poor condition or are

dirty, scratched or covered with fin-
gerprints may not work properly.

∙ The following CDs may not work

properly:

∙ Copy control compact discs (CCCD)

∙ Recordable compact discs (CD-R)

∙ Rewritable compact discs (CD-RW)

∙ Do not use the following CDs as they

may cause the CD player to malfunc-
tion:

∙ 3.1 in (8 cm) discs with an adapter

∙ CDs that are not round

∙ CDs with a paper label

∙ CDs that are warped, scratched, or

have abnormal edges

∙ This audio system can only play pre-

recorded CDs. It has no capability to
record or burn CDs.

∙ If the CD cannot be played, one of the

following messages will be displayed.

LHA0099

Monitor, climate, audio, phone and voice recognition systems

4-29

CHECK DISC

∙ Confirm that the CD is inserted cor-

rectly (the label side is facing up,
etc.).

∙ Confirm that the CD is not bent or

warped and it is free of scratches.

PRESS EJECT

This is an error due to excessive tem-
perature inside the player. Remove
the CD by pressing the EJECT button.
After a short time, reinsert the CD.
The CD can be played when the tem-
perature of the player returns to nor-
mal.

UNPLAYABLE

The file is unplayable in this audio
system (only MP3 or WMA CD).

Compact disc with MP3 or WMA

Terms

∙ MP3 — MP3 is short for Moving Pictures

Experts Group Audio Layer 3. MP3 is the
most well-known compressed digital
audio file format. This format allows for
near “CD quality” sound, but at a fraction
of the size of normal audio files. MP3
conversion of an audio track from CD-
ROM can reduce the file size by approxi-
mately a 10:1 ratio with virtually no per-
ceptible

loss

in

quality.

MP3

compression removes the redundant
and irrelevant parts of a sound signal
that the human ear doesn’t hear.

∙ WMA — Windows Media Audio (WMA)* is

a compressed audio format created by
Microsoft as an alternative to MP3. The
WMA codec offers greater file compres-
sion than the MP3 codec, enabling stor-
age of more digital audio tracks in the
same amount of space when com-
pared to MP3s at the same level of qual-
ity.

∙ Bit rate — Bit rate denotes the number

of bits per second used by a digital mu-
sic file. The size and quality of a com-
pressed digital audio file is determined
by the bit rate used when encoding the
file.

∙ Sampling frequency — Sampling fre-

quency is the rate at which the samples
of a signal are converted from analog to
digital (A/D conversion) per second.

∙ Multisession — Multisession is one of

the methods for writing data to media.
Writing data once to the media is called
a single session, and writing more than
once is called a multisession.

∙ ID3/WMA Tag — The ID3/WMA tag is the

part of the encoded MP3 or WMA file
that contains information about the
digital music file such as song title, art-
ist, encoding bit rate, track time dura-
tion, etc. ID3 tag information is displayed
on the Artist/song title line on the dis-
play.

* Windows® and Windows Media® are reg-
istered trademarks and trademarks in the
United States of America and other coun-
tries of Microsoft Corporation of the USA.

4-30

Monitor, climate, audio, phone and voice recognition systems

Playback order

Music playback order of a CD with MP3 or
WMA files is as illustrated.

∙ The names of folders not containing

MP3 or WMA files are not shown in the
display.

∙ If there is a file in the top level of the disc,

“Root Folder” is displayed.

∙ The playback order is the order in which

the files were written by the writing soft-
ware. Therefore, the files might not play
in the desired order.

Playback order chart

WHA1078

Monitor, climate, audio, phone and voice recognition systems

4-31

Specification chart

Supported media

CD, CD-R, CD-RW

Supported file systems

ISO9660 LEVEL1, ISO9660 LEVEL2, Apple ISO, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported.

Supported
versions*1

MP3

Version

MPEG1, MPEG2, MPEG2.5

Sampling fre-
quency

8 kHz - 48 kHz

Bit rate

8 kbps - 320 kbps, VBR

WMA

Version

WMA7, WMA8, WMA9

Sampling fre-
quency

32 kHz - 48 kHz

Bit rate

48 kbps - 192 kbps, VBR

Tag information

ID3 tag VER1.0, VER1.1, VER2.2, VER2.3 (MP3 only)

Folder levels

Folder levels: 8, Max folders: 255 (including root folder), Files: 512 (Max. 255 files for one folder)

Text character number limitation

128 characters

Displayable character codes*2

01: ASCII, 02: ISO-8859-1, 03: UNICODE (UTF-16 BOM Big Endian), 04: UNICODE (UTF-16 Non-BOM Big Endian), 05: UNI-
CODE (UTF-8), 06: UNICODE (Non-UTF-16 BOM Little Endian)

*1 Files created with a combination of 48 kHz sampling frequency and 64 kbps bit rate cannot be played.

*2 Available codes depend on what kind of media, versions and information are going to be displayed.

4-32

Monitor, climate, audio, phone and voice recognition systems

Troubleshooting guide

Symptom

Cause and Countermeasure

Cannot play

Check if the disc was inserted correctly.

Check if the disc is scratched or dirty.

Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player.

If there is a temperature increase error, the CD player will play correctly after it returns to the normal temperature.

If there is a mixture of music CD files (CD-DA data) and MP3/WMA files on a CD, only the music CD files (CD-DA data) will be played.

Files with extensions other than “.MP3”,“.WMA”, “.mp3” or “.wma” cannot be played. In addition, the character codes and number of char-
acters for folder names and file names should be in compliance with the specifications.

Check if the finalization process, such as session close and disc close, is done for the disc.

Check if the disc is protected by copyright.

Poor sound quality

Check if the disc is scratched or dirty.

Bit rate may be too low.

It takes a relatively long
time before the music
starts playing.

If there are many folders or file levels on the MP3/WMA disc, or if it is a multisession disc, some time may be required before the music
starts playing.

Music cuts off or skips

The writing software and hardware combination might not match, or the writing speed, writing depth, writing width, etc., might not
match the specifications. Try using the slowest writing speed.

Skipping with high bit
rate files

Skipping may occur with large quantities of data, such as for high bit rate data.

Moves immediately to
the next song when play-
ing

When a non-MP3/WMA file has been given an extension of “.MP3”, “.WMA”, .“mp3”or “.wma”, or when play is prohibited by copyright
protection, there will be approximately 5 seconds of no sound and then the player will skip to the next song.

Songs do not play back
in the desired order

The playback order is the order in which the files were written by the writing software. Therefore, the files might not play in the de-
sired order.

Monitor, climate, audio, phone and voice recognition systems

4-33

USB (Universal Serial Bus)
Connection Port

WARNING

Do not connect, disconnect, or operate
the USB device while driving. Doing so
can be a distraction. If distracted you
could lose control of your vehicle and
cause an accident or serious injury.

CAUTION

∙ Do not force the USB device into the

USB port. Inserting the USB device
tilted or up-side-down into the port
may damage the port. Make sure that
the USB device is connected correctly
into the USB port.

∙ Do not grab the USB port cover (if so

equipped) when pulling the USB de-
vice out of the port. This could dam-
age the port and the cover.

∙ Do not leave the USB cable in a place

where it can be pulled unintentionally.
Pulling the cable may damage the
port.

The vehicle is not equipped with a USB de-
vice. USB devices should be purchased
separately as necessary.

This system cannot be used to format USB
memory devices. To format a USB device,
use a personal computer.

In some jurisdictions, the USB device for the
front seats plays only sound without im-
ages for regulatory reasons, even when the
vehicle is parked.

This

system

supports

various

USB

memory devices, USB hard drives and
iPod® players. Some USB devices may not
be supported by this system.

∙ Partitioned USB devices may not play

correctly.

∙ Some characters used in other lan-

guages (Chinese, Japanese, etc.) may
not appear properly in the display. Using
English language characters with a USB
device is recommended.

General notes for USB use

∙ For additional information, refer to your

device manufacturer’s owner informa-
tion regarding the proper use and care
of the device.

Notes for iPod® use

iPod® is a trademark of Apple Inc., regis-
tered in the U.S. and other countries.

∙ Improperly plugging in the iPod® may

cause a check mark to be displayed on
and off (flickering). Always make sure
that the iPod® is connected properly.

∙ An iPod® nano (1st Generation) may re-

main in fast forward or rewind mode if it
is connected during a seek operation. In
this case, please manually reset the
iPod®.

∙ An iPod® nano (2nd Generation) will

continue to fast-forward or rewind if it is
disconnected during a seek operation.

∙ An incorrect song title may appear

when the Play Mode is changed while
using an iPod® nano (2nd Generation).

∙ Audiobooks may not play in the same

order as they appear on an iPod®.

∙ Large video files cause slow responses

in an iPod®. The vehicle center display
may momentarily black out, but will
soon recover.

4-34

Monitor, climate, audio, phone and voice recognition systems

∙ If an iPod® automatically selects large

video files while in the shuffle mode, the
vehicle center display may momen-
tarily black out, but will soon recover.

iPod®* player

∙ Some characters used in other lan-

guages (Chinese, Japanese, etc.) are not
displayed properly on the vehicle center
screen. We recommend using English
language characters with an iPod®.

∙ Large video podcast files cause slow

responses in the iPod®. The vehicle cen-
ter display may momentarily black out,
but it will soon recover.

∙ If the iPod® automatically selects large

video podcast files while in the shuffle
mode, the vehicle center display may
momentarily black out, but it will soon
recover.

∙ Improperly plugging in the iPod® may

cause a checkmark to be displayed on
and off (flickering). Always make sure
that the iPod® is connected properly.

∙ The iPod® nano (2nd Generation) will

continue to fast forward or rewind if it is
disconnected during a seek operation.

∙ An incorrect song title may appear

when the Play Mode is changed while
using the iPod® nano (2nd Generation).

∙ Audiobooks may not play in the same

order as they appear on the iPod®.

∙ The iPod® nano (1st Generation) may

remain in fast forward or rewind mode if
it is connected during a seek operation.
In this case, please manually reset the
iPod®.

∙ If you are using an iPod® (3rd Generation

with Dock connector), do not use very
long names for the song title, album
name or artist name to prevent the
iPod® from resetting itself.

∙ Be careful not to do the following, or the

cable could be damaged and a loss of
function may occur:

∙ Bend the cable excessively (1.6 in

(40 mm) radius maximum).

∙ Twist the cable excessively (more

than 180 degrees).

∙ Pull or drop the cable.

∙ Do not force the iPod® cable connec-

tor into the device port.

∙ Close the center console lid on the

cable or connectors.

∙ Store objects with sharp edges in the

storage where the cable is stored.

∙ Spill liquids on the cable and connec-

tors.

∙ Do not connect the cable to the iPod® if

the cable and/or connectors are wet. It
may damage the iPod®.

∙ If the cable and connectors are ex-

posed to water, allow the cable and/or
connectors to dry completely before
connecting the cable to the iPod® (wait
24 hours for it to dry).

∙ If the connector is exposed to fluids

other than water, evaporative residue
may cause a short between the con-
nector pins. In this case, replace the
cable, otherwise damage to the iPod®
and a loss of function may occur.

∙ If the cable is damaged (insulation cut,

connectors

cracked,

contamination

such as liquids, dust, dirt, etc. in the con-
nectors), do not use the cable and con-
tact a NISSAN dealer to replace the
cable with a new one.

Monitor, climate, audio, phone and voice recognition systems

4-35

∙ When not in use for extended periods of

time, store the cable in a clean, dust free
environment at room temperature and
without direct sun exposure.

∙ Do not use the cable for any other pur-

poses other than its intended use in the
vehicle.

*iPod® is a trademark of Apple Inc., regis-
tered in the U.S. and other countries.

Bluetooth® streaming audio

∙ Some Bluetooth® audio devices may

not be recognized by the in-vehicle au-
dio system.

∙ It is necessary to set up the wireless

connection

between

a

compatible

Bluetooth® audio device and the in-
vehicle Bluetooth® module before using
the Bluetooth® audio.

∙ Operating procedure of the Bluetooth®

audio will vary depending on the de-
vices. Make sure how to operate your
audio device before using it with this
system.

∙ The Bluetooth® audio may be stopped

under the following conditions:

∙ Receiving a call on the Hands-Free

Phone System.

∙ Checking the connection to the

hands-free phone.

∙ Do not place the Bluetooth® audio de-

vice in an area surrounded by metal or
far away from the in-vehicle Bluetooth®
module to prevent tone quality degra-
dation and wireless connection disrup-
tion.

∙ While an audio device is connected

through the Bluetooth® wireless con-
nection, the battery power of the device
may discharge quicker than usual.

∙ This system supports the Bluetooth®

Audio Distribution Profile (A2DP, AVRCP).

BLUETOOTH® is a
trademark owned
by Bluetooth SIG,
Inc. and licensed
to Visteon and
Bosch.

4-36

Monitor, climate, audio, phone and voice recognition systems

FM/AM RADIO WITH COMPACT
DISC (CD) PLAYER (if so equipped)

For additional information, refer to “Audio
operation precautions” in this section.

1.

CD eject button

2. FM•AM button

3. CD insert slot

4. Display screen

5. SCAN button

6.

SEEK/TRACK buttons

7. iPod MENU button

8.

BACK button

9. ENTER/SETTING button and TUNE/

FOLDER control knob

10. Station select (1–6) buttons

11. RDM button

12. RPT button

13. VOL (volume) knob /

(power) button

14. DISP button

15. MEDIA button

16. CD button

Audio main operation

(power) button / VOL (volume)

control knob

Place the ignition switch in the ACC or ON
position and press the

(power) but-

ton while the system is off to call up the
mode (radio, CD, AUX, Bluetooth® audio,
USB or iPod®) that was playing immediately
before the system was turned off.

To turn the system off, press the
(power) button.
Turn the VOL (volume) control knob to ad-
just the volume.

LHA3026

Monitor, climate, audio, phone and voice recognition systems

4-37