Qashqai J11. Warning chime system — part 2
WCS
DIAGNOSIS SYSTEM (COMBINATION METER)
WCS-17
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SPECIAL FUNCTION
Special menu
W/L ON HISTORY
• “W/L ON HISTORY” indicates the “TIME” when the warning/ indicator lamp is turned on.
• The “TIME” above is:
- 0: The condition that the warning/indicator lamp has been turned on 1 or more times after starting the engine
and waiting for 30 seconds.
- 1 - 39: The number of times the engine was restarted after the 0 condition.
- NO W/L ON HISTORY: No warning/indicator lamp history is stored.
NOTE:
• W/L ON HISTORY is not stored for approximately 30 seconds after the engine starts.
• Brake warning lamp does not store any history when the parking brake is applied or the brake fluid level gets
low.
AIR PRES W/L
[On/Off]
Displays [On/Off] condition of tire pressure warning lamp.
KEY G/Y W/L
[On/Off]
Displays [On/Off] condition of key green warning lamp.
EPS W/L
[On/Off]
Displays [On/Off] condition of EPS warning indicator.
LCD
Displays the value of Intelligent Key system message indication.
SHIFT IND
[P, R, N, D, L]
Displays shift selector position.
FUEL CAP W/L
[On/Off]
Displays [On/Off] condition of loose fuel cap warning message.
O/D OFF SW
[On/Off]
Displays [On/Off] condition of O/D Off switch.
PKB SW
[On/Off]
Displays [On/Off] condition of parking brake switch.
BUCKLE SW
[On/Off]
Displays [On/Off] condition of seat belt buckle switch LH.
PASS BUCKLE SW
[On/Off]
Displays [On/Off] condition of seat belt buckle switch RH.
BRAKE OIL SW
[On/Off]
Displays [On/Off] condition of brake fluid level switch.
DISTANCE
[Mi] or [km]
Displays distance to empty.
OUTSIDE TEMP
[
°
F or
°
C]
Displays the ambient air temperature which is input from the ambient sensor.
FUEL LOW SIG
[On/Off]
Displays [On/Off] condition of low-fuel warning signal.
STRG SW INPUT
[SW 1-SW 10, NOT INPUT]
Displays [SW 1-SW 10, NOT INPUT] condition of steering switches.
BUZZER
[On/Off]
X
Buzzer status (in the combination meter) is detected from the buzzer output signal
received from each unit via CAN communication and the warning output condition
of the combination meter.
BSW IND
[On/Off]
Displays [On/Off] condition of blind spot warning indicator.
BSW W/L
[On/Off]
Displays [On/Off] condition of blind spot warning message in the information dis-
play.
Display item [Unit]
MAIN
SIGNALS
Description
Display item
Description
W/L ON HISTORY
Lighting history of warning lamp and indicator lamp can be checked.
WCS-18
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (BCM) (WITH INTELLIGENT KEY SYSTEM)
DIAGNOSIS SYSTEM (BCM) (WITH INTELLIGENT KEY SYSTEM)
COMMON ITEM
COMMON ITEM : CONSULT Function (BCM - COMMON ITEM)
INFOID:0000000010438767
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions.
BUZZER
Direct Diagnostic Mode
Description
Ecu Identification
The BCM part number is displayed.
Self Diagnostic Result
The BCM self diagnostic results are displayed.
Data Monitor
The BCM input/output data is displayed in real time.
Active Test
The BCM activates outputs to test components.
Work support
The settings for BCM functions can be changed.
Configuration
• The vehicle specification can be read and saved.
• The vehicle specification can be written when replacing BCM.
CAN Diag Support Mntr
The result of transmit/receive diagnosis of CAN communication is displayed.
System
Sub System
Direct Diagnostic Mode
E
c
u
Id
en
tifi
ca
tio
n
Se
lf
Di
ag
no
st
ic
Re
su
lt
Da
ta
Mo
ni
tor
A
c
ti
ve
T
e
st
W
o
rk support
Co
nf
igu
rat
ion
CA
N Diag
Su
pp
ort Mn
tr
Door lock
DOOR LOCK
×
×
×
×
Rear window defogger
REAR DEFOGGER
×
×
×
Warning chime
BUZZER
×
×
Interior room lamp timer
INT LAMP
×
×
×
Exterior lamp
HEADLAMP
×
×
×
Wiper and washer
WIPER
×
×
×
Turn signal and hazard warning lamps
FLASHER
×
×
Intelligent Key system
INTELLIGENT KEY
×
×
×
×
Combination switch
COMB SW
×
BCM
BCM
×
×
×
×
×
Immobilizer
IMMU
×
×
×
Interior room lamp battery saver
BATTERY SAVER
×
×
Back door open
TRUNK
×
Vehicle security system
THEFT ALM
×
×
×
RAP system
RETAINED PWR
×
Signal buffer system
SIGNAL BUFFER
×
TPMS
AIR PRESSURE MONITOR
×
×
×
×
WCS
DIAGNOSIS SYSTEM (BCM) (WITH INTELLIGENT KEY SYSTEM)
WCS-19
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
BUZZER : CONSULT Function (BCM - BUZZER) (With Intelligent Key System)
INFOID:0000000010438768
DATA MONITOR
ACTIVE TEST
Monitor Item [Unit]
Description
PUSH -SW [On/Off]
Indicates condition of push-button ignition switch.
VEH SPEED 1 [km/h]
Indicates vehicle speed signal received from ABS on CAN communication line.
TAIL LAMP SW [On/Off]
Indicates condition of combination switch.
FR FOG SW [On/Off]
Indicates condition of front fog lamp switch.
DOOR SW-DR [On/Off]
Indicates condition of front door switch LH.
CDL LOCK SW [On/Off]
Indicates condition of lock signal from door lock and unlock switch.
Test Item
Description
SEAT BELT WARN TEST
This test is able to check seat belt warning chime operation [On/Off].
LIGHT WARN ALM
This test is able to check light warning chime operation [On/Off].
REVERSE WARNING
This test is able to check reverse warning chime operation [On/Off].
ID REGIST WARNING
This test is able to check TPMS sensor ID regist warning chime operation [On/Off].
WCS-20
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (BCM) (WITHOUT INTELLIGENT KEY SYSTEM)
DIAGNOSIS SYSTEM (BCM) (WITHOUT INTELLIGENT KEY SYSTEM)
COMMON ITEM
COMMON ITEM : CONSULT Function (BCM - COMMON ITEM)
INFOID:0000000010438769
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions.
BUZZER
Direct Diagnostic Mode
Description
Ecu Identification
The BCM part number is displayed.
Self Diagnostic Result
The BCM self diagnostic results are displayed.
Data Monitor
The BCM input/output data is displayed in real time.
Active Test
The BCM activates outputs to test components.
Work support
The settings for BCM functions can be changed.
Configuration
• The vehicle specification can be read and saved.
• The vehicle specification can be written when replacing BCM.
CAN Diag Support Mntr
The result of transmit/receive diagnosis of CAN communication is displayed.
System
Sub System
Direct Diagnostic Mode
E
c
u
Id
en
tifi
ca
tio
n
Se
lf
Di
ag
no
st
ic
Re
su
lt
Da
ta
Mo
ni
tor
A
c
ti
ve
T
e
st
W
o
rk support
Co
nf
igu
rat
ion
CA
N Diag
Su
pp
ort Mn
tr
Door lock
DOOR LOCK
×
×
×
Rear window defogger
REAR DEFOGGER
×
×
×
Warning chime
BUZZER
×
×
Interior room lamp timer
INT LAMP
×
×
×
Remote keyless entry system
MULTI REMOTE ENT
×
Exterior lamp
HEADLAMP
×
×
Wiper and washer
WIPER
×
×
×
Turn signal and hazard warning lamps
FLASHER
×
×
Combination switch
COMB SW
×
BCM
BCM
×
×
×
×
×
Immobilizer
IMMU
×
×
Interior room lamp battery saver
BATTERY SAVER
×
×
Back door open
TRUNK
×
Vehicle security system
THEFT ALM
×
×
×
RAP system
RETAINED PWR
×
TPMS
AIR PRESSURE MONITOR
×
×
×
×
WCS
DIAGNOSIS SYSTEM (BCM) (WITHOUT INTELLIGENT KEY SYSTEM)
WCS-21
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
BUZZER : CONSULT Function (BCM - BUZZER) (Without Intelligent Key System)
INFOID:0000000010438770
DATA MONITOR
ACTIVE TEST
Monitor Item [Unit]
Description
TAIL LAMP SW [On/Off]
Indicates condition of combination switch.
DOOR SW-DR [On/Off]
Indicates condition of front door switch LH.
CDL LOCK SW [On/Off]
Indicates condition of lock signal from door lock and unlock switch.
Test Item
Description
SEAT BELT WARN TEST
This test is able to check seat belt warning chime operation [On/Off].
LIGHT WARN ALM
This test is able to check light warning chime operation [On/Off].
REVERSE WARNING
This test is able to check reverse warning chime operation [On/Off].
ID REGIST WARNING
This test is able to check TPMS sensor ID regist warning chime operation [On/Off].
WCS-22
< ECU DIAGNOSIS INFORMATION >
COMBINATION METER
ECU DIAGNOSIS INFORMATION
COMBINATION METER
Reference Value
INFOID:0000000010503091
VALUES ON THE DIAGNOSIS TOOL
Monitor Item
Condition
Value/Status
SPEED METER
[km/h]
Ignition switch
ON
While driving
Input value of vehicle speed signal
(CAN communication signal)
NOTE:
655.35 is displayed when the malfunc-
tion signal is received
SPEED OUTPUT
[km/h]
Ignition switch
ON
While driving
Output value of vehicle speed signal
(CAN communication signal)
NOTE:
655.35 is displayed when the malfunc-
tion signal is received
ODO OUTPUT
Ignition switch
ON
—
Output value of odometer signal (CAN
communication signal)
TACHO METER
[rpm]
Ignition switch
ON
While driving
Input value of engine speed signal
(CAN communication signal)
NOTE:
8191.875 is displayed when the mal-
function signal is received
FUEL METER
[lit]
Ignition switch
ON
—
Input value of fuel level sensor signal
W TEMP METER
[
°
C]
Ignition switch
ON
—
Input value of engine coolant tempera-
ture signal (CAN communication sig-
nal)
NOTE:
215 is displayed when the malfunction
signal is input
ABS W/L
Ignition switch
ON
ABS warning lamp ON
On
ABS warning lamp OFF
Off
VDC/TCS IND
Ignition switch
ON
VDC OFF indicator lamp ON
On
VDC OFF indicator lamp OFF
Off
SLIP IND
Ignition switch
ON
VDC warning lamp ON
On
VDC warning lamp OFF
Off
BRAKE W/L
Ignition switch
ON
Brake warning lamp ON
On
Brake warning lamp OFF
Off
DOOR W/L
Ignition switch
ON
During door open warning indication
On
Other than the above
Off
TRUNK/GLAS-H
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
HI-BEAM IND
Ignition switch
ON
High beam indicator lamp ON
On
High beam indicator lamp OFF
Off
TURN IND
Ignition switch
ON
Turn signal indicator lamp ON
On
Turn signal indicator lamp OFF
Off
FR FOG IND
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
WCS
COMBINATION METER
WCS-23
< ECU DIAGNOSIS INFORMATION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
RR FOG IND
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
LIGHT IND
Ignition switch
ON
Position lamp indicator lamp ON
On
Position lamp indicator lamp OFF
Off
OIL W/L
Ignition switch
ON
Engine oil pressure warning lamp ON
On
Engine oil pressure warning lamp OFF
Off
MIL
Ignition switch
ON
Malfunction indicator (Yellow) ON
On
Malfunction indicator (Yellow) OFF
Off
GLOW IND
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
C-ENG2 W/L
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
CRUISE IND
Ignition switch
ON
Cruise indicator ON
On
Cruise indicator OFF
Off
SET IND
Ignition switch
ON
SET indicator ON
On
SET indicator OFF
Off
O/D OFF IND
Ignition switch
ON
OD OFF indicator lamp ON
On
OD OFF indicator lamp OFF
Off
ATC/T-AMT W/L
Ignition switch
ON
A/T CHECK indicator lamp ON
On
A/T CHECK indicator lamp OFF
Off
ATF TEMP W/L
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
CVT IND
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
4WD W/L
Ignition switch
ON
AWD warning lamp ON
On
AWD warning lamp OFF
Off
4WD LOCK IND
Ignition switch
ON
AWD LOCK indicator lamp ON
On
AWD LOCK indicator lamp OFF
Off
FUEL W/L
Ignition switch
ON
During low fuel warning indication
On
Other than the above
Off
WASHER W/L
Ignition switch
ON
During low washer fluid warning indication
On
Other than the above
Off
AIR PRES W/L
Ignition switch
ON
Low tire pressure warning lamp ON
On
Other than the above
Off
KEY G/Y W/L
Ignition switch
ON
Intelligent Key system malfunction ON
On
Intelligent Key system malfunction OFF
Off
KEY R W/L
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
KEY KNOB W/L
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
EPS W/L
Ignition switch
ON
EPS warning lamp ON
On
EPS warning lamp OFF
Off
Monitor Item
Condition
Value/Status
WCS-24
< ECU DIAGNOSIS INFORMATION >
COMBINATION METER
DPF W/L
Engine running
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
TRAILER IND
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
SHIFT IND
Ignition switch
ON
During the indication of “P” by shift position
indicator
P
During the indication of “R” by shift position
indicator
R
During the indication of “N” by shift position
indicator
N
During the indication of “D” by shift position
indicator
D
During the indication of “L” by shift position
indicator
L
During the indication of “M1” by shift posi-
tion indicator
M1
During the indication of “M2” by shift posi-
tion indicator
M2
During the indication of “M3” by shift posi-
tion indicator
M3
During the indication of “M4” by shift posi-
tion indicator
M4
During the indication of “M5” by shift posi-
tion indicator
M5
During the indication of “M6” by shift posi-
tion indicator
M6
M RANGE SW
Ignition switch
ON
Selector lever in manual mode position
On
Other than the above
Off
NM RANGE SW
Ignition switch
ON
Selector lever in manual mode position
Off
Other than the above
On
AT SFT UP SW
Ignition switch
ON
Selector lever in + position
On
Other than the above
Off
AT SFT DWN SW
Ignition switch
ON
Selector lever in – position
On
Other than the above
Off
A/C LOW TEMP
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
COMP F/B SIG
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
PKB SW
Ignition switch
ON
Parking brake switch ON
On
Parking brake switch OFF
Off
BUCKLE SW
Ignition switch
ON
Driver seat belt not fastened
On
Driver seat belt fastened
Off
BRAKE OIL SW
Ignition switch
ON
Brake fluid level switch ON
On
Brake fluid level switch OFF
Off
AMB POWER
Ignition switch
ON
Other than the following
On
Receives A/C auto amp. connection recog-
nition signal
Off
Monitor Item
Condition
Value/Status
WCS
COMBINATION METER
WCS-25
< ECU DIAGNOSIS INFORMATION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
NOTE:
Some items are not available according to vehicle specification.
TERMINAL LAYOUT
PHYSICAL VALUES
DISTANCE
[km]
Ignition switch
ON
—
Distance to empty calculated by com-
bination meter
OUTSIDE TEMP
[
°
C or
°
F]
Ignition switch
ON
—
Input value ofoutside temperature
sender sensor signal (CAN communi-
cation signal)
NOTE:
This may not match the indicated value
on the information display.
FUEL LOW SIG
Ignition switch
ON
Low fuel warning displayed
On
Low fuel warning not displayed
Off
BUZZER
Ignition switch
ON
Buzzer ON
On
Buzzer OFF
Off
ASCD SPD BLNK
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
ASCD STATUS
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
ASCD REQ SPD
[km/h or Off]
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
Monitor Item
Condition
Value/Status
JSNIA0457ZZ
Terminal No.
(Wire color)
Description
Condition
Value
(Approx.)
+
–
Signal name
Input/
Output
1
(B)
Ground
Ground 1
—
Ignition
switch
ON
—
0 V
7
(L)
Ground
Security signal
Input
Ignition
switch
OFF
Security warning lamp ON
0 V
Security warning lamp OFF
12 V
9
(P)
Ground
ECO MODE switch signal
Input
Ignition
switch
OFF
ECO MODE switch ON
0 V
ECO MODE switch OFF
12 V
WCS-26
< ECU DIAGNOSIS INFORMATION >
COMBINATION METER
15
(BG)
Ground
Outside temperature send-
er (ambient sensor) signal
Input
Ignition
switch
ON
—
17
(BG)
Ground
Satellite switch ground
—
Ignition
switch
ON
—
0 V
18
(SB)
Ground
TRIP RESET SWITCH
Input
Ignition
switch
OFF
TRIP RESET switch ON
12 V
TRIP RESET switch OFF
0 V
20
(R)
Ground
Outside temperature sen-
sor ground
—
Ignition
switch
ON
—
0 V
21
(L)
Ground
Steering switch (trip com-
puter) ground
Input
Ignition
switch
ON
—
0 V
22
(LG)
Ground
Steering switch (trip com-
puter) input A signal
Input
Ignition
switch
ON
Press the steering switch
0 V
Other than above
5 V
23
(GR)
Ground
Steering switch (trip com-
puter) input B signal
Input
Ignition
switch
ON
Press the steering switch
0 V
Other than above
5 V
25
(Y)
Ground
Brake fluid level switch sig-
nal
Input
Ignition
switch
ON
Brake fluid level is normal
5 V
Brake fluid level is less than
low level
0 V
27
(W)
Ground
LDW OFF switch signal
Input
Ignition
switch
OFF
LDW OFF switch ON
0 V
LDW OFF switch OFF
12 V
28
(W)
Ground
Seat belt buckle switch sig-
nal (driver side)
Input
Ignition
switch
ON
When driver seat belt is fas-
tened
12 V
When driver seat belt is not
fastened
0 V
30
(Y)
Ground
M RANGE
Input
Ignition
switch
ON
Manual mode
0 V
Other than the above
12 V
31
(G)
Ground
Not M RANGE
Input
Ignition
switch
ON
Manual mode
12 V
Other than the above
0 V
32
(R)
Ground
A/T shift up signal
Input
Ignition
switch
ON
Selector lever (+) position
0 V
Other than the above
12 V
33
(W)
Ground
A/T shift down signal
Input
Ignition
switch
ON
Selector lever (–) position
0 V
Other than the above
12 V
36
(BR)
Ground
Illumination control switch
signal (+)
Input
Ignition
switch
OFF or
ON
When illumination switch
(+) is pressed
0 V
Other than above
5 V
Terminal No.
(Wire color)
Description
Condition
Value
(Approx.)
+
–
Signal name
Input/
Output
JSNIA0014GB
WCS
COMBINATION METER
WCS-27
< ECU DIAGNOSIS INFORMATION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
37
(V)
Ground
Illumination control switch
signal (-)
Input
Ignition
switch
OFF or
ON
When illumination switch (-)
is pressed
0 V
Other than above
5 V
38
(P)
Ground
Vehicle speed signal
(8-pulse)
Output
Ignition
switch
ON
Speedometer operated
[When vehicle speed is ap-
prox. 40 km/h (25 MPH)]
NOTE:
The maximum voltage varies de-
pending on the specification
(destination unit).
41
(L)
—
CAN-H
—
—
—
—
42
(P)
—
CAN-L
—
—
—
—
43
(R)
Ground
Illumination control signal
Output
Ignition
switch
ON
• Lighting switch 1ST posi-
tion
• When meter illumination
is maximum
• Lighting switch 1ST posi-
tion
• When meter illumination
is step 11
• Lighting switch 1ST posi-
tion
• When meter illumination
is minimum
12 V
44
(B)
Ground
Fuel level sensor signal
ground
—
Ignition
switch
ON
—
0 V
45
(W)
Ground
Battery power supply
Input
Ignition
switch
OFF
—
Battery voltage
46
(BG)
Ground
Ignition signal
Input
Ignition
switch
ON
—
Battery voltage
47
(SB
—
M-CAN-H
—
—
—
—
48
(LG)
—
M-CAN-L
—
—
—
—
Terminal No.
(Wire color)
Description
Condition
Value
(Approx.)
+
–
Signal name
Input/
Output
JSNIA0015GB
JPNIA1687GB
JPNIA1686GB
WCS-28
< ECU DIAGNOSIS INFORMATION >
COMBINATION METER
Fail-safe
INFOID:0000000010503092
The combination meter activates the fail-safe control if the CAN communication lines between each unit are
malfunctioning.
49
(V)
50
(P)
Oil level sensor signal
Input
Ignition
switch
ON
—
51
(G)
44
(B)
Fuel level sensor signal
Input
Ignition
switch
ON
—
52
(B)
Ground
Ground 2
—
Ignition
switch
ON
—
0 V
Terminal No.
(Wire color)
Description
Condition
Value
(Approx.)
+
–
Signal name
Input/
Output
JSNIA3463ZZ
JSNIA3463ZZ
Function
Specifications
Speedometer
Reset to zero by suspending communication.
Tachometer
Engine coolant temperature gauge
Meter illumination control
When suspending communication, changes to
nighttime mode.
Buzzer
Turned off by suspending communication.
Information dis-
play
Trip computer
Current fuel consumption
• When reception time of an abnormal signal is
2 seconds or less, the last received datum is
used for calculation to indicate the result.
• When reception time of an abnormal signal is
more than 2 seconds, the last result calculat-
ed during normal condition is indicated.
Average fuel consumption
Average vehicle speed
Range (Distance to empty)
Driving distance
An indicated value is maintained at communica-
tions blackout.
Interrupt indication
Door open warning
The indicator turns OFF by suspending commu-
nication.
Low tire pressure warning
Fuel filler cap warning
Odo/trip meter
An indicated value is maintained at communica-
tions blackout.
Shift position indicator
The indicator turns OFF by suspending commu-
nication.
WCS
COMBINATION METER
WCS-29
< ECU DIAGNOSIS INFORMATION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
DTC Index
INFOID:0000000010438773
Warning lamp/
indicator lamp
ABS warning lamp
Turned on by suspending communication.
Brake warning lamp
EPS warning lamp
VDC warning lamp
AWD warning lamp
Malfunction indicator lamp
VDC OFF indicator lamp
Turned off by suspending communication.
SPORT mode indicator lamp
AWD LOCK indicator lamp
Oil pressure warning lamp
High beam indicator lamp
Turn signal indicator lamp
Position lamp indicator lamp
A/T CHECK indicator lamp
Low tire pressure warning lamp
After blinking for 1 minute, the lamp remains
ON.
Function
Specifications
Display contents of CONSULT
Diagnostic item is detected when...
Refer to
CAN COMM CIRCUIT
[U1000]
Combination meter is not transmitting or receiving CAN communication signal for 2
seconds or more.
CONTROL UNIT (CAN)
[U1010]
Detecting error during the initial diagnosis of CAN controller of combination meter.
VEHICLE SPEED
[B2205]
The abnormal vehicle speed signal is input from ABS actuator and electric unit (con-
trol unit) for 2 seconds or more.
ENGINE SPEED
[B2267]
ECM continuously transmits abnormal engine speed signals for 2 seconds or more.
WATER TEMP
[B2268]
ECM continuously transmits abnormal engine coolant temperature signals for 60
seconds or more.
WCS-30
< ECU DIAGNOSIS INFORMATION >
BCM (BODY CONTROL MODULE)
BCM (BODY CONTROL MODULE)
List of ECU Reference
INFOID:0000000010438774
ECU
Reference
BCM
WCS
WARNING CHIME SYSTEM
WCS-31
< WIRING DIAGRAM >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
WIRING DIAGRAM
WARNING CHIME SYSTEM
Wiring Diagram
INFOID:0000000010438775
JRNWD1341GB
WCS-32
< WIRING DIAGRAM >
WARNING CHIME SYSTEM
JRNWE0830GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст