Nissan Xterra. Manual — part 482
INL-60
< REMOVAL AND INSTALLATION >
INTERIOR ROOM LAMP
1. Using a suitable tool (A), release the pawls and remove the
room lamp 2nd row lens (1).
: Pawl
2. Remove room lamp 2nd row screws (2).
3. Disconnect the harness connector from the room lamp 2nd row
and remove.
Installation
Installation is in the reverse order of removal.
Bulb Replacement
1. Using a suitable tool, release the pawls and remove the room lamp 2nd row lens.
2. Release the room lamp 2nd row bulb retainers (1), then pull bulb
(2) straight out to remove.
3. Install the bulb (2).
4. Install the room lamp 2nd row lens.
CARGO LAMP
Removal
AWLIA1680ZZ
ALLIA0326ZZ
INTERIOR ROOM LAMP
INL-61
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
1. Using a suitable tool (A), release the pawls and remove the
cargo lamp lens (1).
: Pawl
2. Remove cargo lamp screws (2).
3. Disconnect the harness connector from the cargo lamp and
remove.
Installation
Installation is in the reverse order of removal.
Bulb Replacement
1. Using a suitable tool, release the pawls and remove the cargo lamp lens.
2. Release the cargo lamp bulb retainers (1), then pull bulb (2)
straight out to remove.
3. Install the bulb (2).
4. Install the cargo lamp lens.
VANITY LAMP
Removal
The vanity lamp is replaced as part of the sun visor assembly. Refer
to
INT-21, "Removal and Installation"
.
Installation
Installation is in the reverse order of removal.
Bulb Replacement
The vanity lamp bulb is replaced as part of the sun visor assembly. Refer to
INT-21, "Removal and Installa-
.
AWLIA1680ZZ
ALLIA0326ZZ
ALLIA0583ZZ
INL-62
< REMOVAL AND INSTALLATION >
ILLUMINATION
ILLUMINATION
Removal and Installation
INFOID:0000000009483149
ILLUMINATION CONTROL SWITCH
Removal
The illumination control switch is replaced as a part of the combina-
tion meter. Refer to
MWI-84, "Removal and Installation"
Installation
Installation is in the reverse order of removal.
SHIFT SELECTOR FINISHER LAMP
Removal
1. Remove shift selector finisher from center console. Refer to
IP-20, "Removal and Installation"
.
2. Rotate shift selector finisher lamp socket (2) with bulb (3) coun-
terclockwise, then pull away from shift selector (1).
Installation
Installation is in the reverse order of removal.
Bulb Replacement
1. Remove shift selector finisher from center console. Refer to
IP-20, "Removal and Installation"
.
2. Remove shift selector finisher lamp socket (1), then pull bulb (2)
straight out away from socket.
3. Install the bulb (2) to the shift selector finisher lamp socket (1).
4. Install shift selector to center console. Refer to
IGNITION KEYHOLE ILLUMINATION LAMP
Removal
1. Partially remove LH front door welt and position aside. Refer to
INT-18, "Removal and Installation"
.
2. Remove front pillar lower finisher. Refer to
INT-18, "Removal and Installation"
.
3. Remove instrument lower panel LH. Refer to
IP-14, "Removal and Installation"
.
LKIA0579E
ALLIA0590ZZ
ALLIA0321ZZ
ILLUMINATION
INL-63
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
4. Partially remove the BCM and position aside.
5. Remove ignition keyhole illumination lamp.
Installation
Installation is in the reverse order of removal.
Bulb Replacement
1. Remove keyhole illumination lamp.
2. Pull bulb (2) straight out from keyhole illumination lamp socket
(1) to remove.
3. Install the bulb (2) to keyhole illumination lamp socket (1).
4. Install keyhole illumination lamp.
ALLIA1047ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст