Nissan Xterra. Manual — part 485
IP-8
< SYMPTOM DIAGNOSIS >
SQUEAK AND RATTLE TROUBLE DIAGNOSES
Diagnostic Worksheet
INFOID:0000000009485672
LAIA0072E
SQUEAK AND RATTLE TROUBLE DIAGNOSES
IP-9
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
LAIA0071E
IP-10
< REMOVAL AND INSTALLATION >
INSTRUMENT PANEL ASSEMBLY
REMOVAL AND INSTALLATION
INSTRUMENT PANEL ASSEMBLY
Exploded View
INFOID:0000000009485673
1.
Display unit bracket (LH/RH)
2.
Steering member assembly
3.
Knee protector
4.
Instrument stay (LH/RH)
5.
Knee protector brace
6.
Speaker grille (LH/RH)
7.
Instrument lower panel LH
8.
Cluster lid A
9.
Side ventilator grille (LH/RH)
10. Combination meter
11.
Steering lock escutcheon
12. Steering column upper cover
13. Steering column lower cover
14.
Storage tray
15. Cluster lid C
AWJIA1032ZZ
INSTRUMENT PANEL ASSEMBLY
IP-11
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
Removal and Installation
INFOID:0000000009485674
REMOVAL
CAUTION:
Before servicing, turn the ignition switch off, disconnect both battery terminals, then wait at least
three minutes.
1. Disconnect both the negative and positive battery terminals, then wait at least three minutes. Refer to
72, "Removal and Installation"
2. Remove front pillar upper finishers. Refer to
INT-18, "Removal and Installation"
3. Remove the center console. Refer to
IP-21, "Removal and Installation"
.
4. Remove the combination meter. Refer to
MWI-84, "Removal and Installation"
5. Remove audio unit (if equipped). Refer to
XX-XX, "*****"
(BASE AUDIO),
AV-108, "Removal and Installa-
(DISPLAY AUDIO WITHOUT AMPLIFIER), or
XX-XX, "*****"
(DISPLAY AUDIO WITH AMPLIFIER).
6. Remove AV control unit (if equipped). Refer to
AV-218, "Removal and Installation"
.
7. Remove cluster lid D. Refer to
IP-16, "Removal and Installation"
8. Remove the front passenger air bag module. Refer to
SR-15, "Removal and Installation"
.
9. Remove the instrument stay bolts (LH/RH).
10. Disconnect all remaining harnesses and connectors.
11. Remove instrument panel and pad assembly.
INSTALLATION
Installation is in the reverse order of removal.
16. Center ventilator grille (LH/RH)
17.
Cluster lid D
18. Audio unit
19. Lower glove box latch assembly
20.
Lower glove box assembly
21. Fuse block cover
22. Lower glove box damper assembly
23.
Instrument lower panel RH
24. Upper glove box door
25. Upper glove box
26.
Side ventilator finisher
27. Instrument panel and pad assembly
28. Passenger air bag module
29.
Sensor cover
30. Optical sensor (if equipped)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст